Vacuum lines need help!

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
aznxkrnxboi
Posts: 160
Joined: Sat Oct 22, 2005 2:51 pm
Car: 240sx 91 fastback

Post

I have a sr20det red top I need help with the vaccum lines, I have no idea where the TPS nipples are suppose to go. wherever the yellow marks go I need someone to verify this.

http://img.photobucket.com/alb...4.jpg

http://img.photobucket.com/alb...3.jpg

http://img.photobucket.com/alb...5.jpg

http://img.photobucket.com/alb...1.jpg


User avatar
IanS
Posts: 9758
Joined: Thu Dec 23, 2004 3:07 pm
Car: 2002 Subaru WRX, 2010 Subaru Forester XT, 2004 Infiniti G35 Coupe.
Location: Esko, MN
Contact:

Post

the TPS is the Throttle Position Sensor and it has no nipples, I believe what you have pictures of is the boost control solonoid, and it should see direct boost, if you search there are diagrams.

Gramentz
Posts: 119
Joined: Wed May 17, 2006 3:56 pm
Car: s14

Post

SideWays=smiles wrote: if you search there are diagrams.
Heavy throttle has a great faq/ misc info page.

User avatar
SpeedRacer1
Posts: 3144
Joined: Fri Jul 26, 2002 7:44 pm
Car: 1990 240SX, G35

Post


roamaver
Posts: 83
Joined: Sat Dec 16, 2006 5:07 pm
Car: '91 240sx se HB

Post

What are the peices I've set arrows to?

User avatar
IanS
Posts: 9758
Joined: Thu Dec 23, 2004 3:07 pm
Car: 2002 Subaru WRX, 2010 Subaru Forester XT, 2004 Infiniti G35 Coupe.
Location: Esko, MN
Contact:

Post

roamaver wrote:What are the peices I've set arrows to?
The one to the far left is the Fuel pressure regulator, the one on the drives side of the engine block you do not need, and Im not sure what the other two are, I dont have them

User avatar
SpeedRacer1
Posts: 3144
Joined: Fri Jul 26, 2002 7:44 pm
Car: 1990 240SX, G35

Post

The last two are solenoid valves. The upper one is for the secondary air system and can be tossed. The bottom one is the boost control solenoid, you can keep this if you want.


Return to “SR20DET Forum (rear-drive)”