***URGENT*** Everybody Check Your Door FRAMES!!

All things Altima Coupe.
User avatar
BadaBing7189
Posts: 153
Joined: Fri Jul 16, 2010 6:14 am
Car: 08 Altima Coupe SL
Location: Tri State Area

Post

dangeris wrote:Mine is fine...no cracks or rust.

Maybe you should stop picking up fat chicks :naughty: ...Just sayin' yo :chuckle:
ROFL i was just about to say the same thing but you beat me to it fat chicks are no bueno leave those to the civic owners :rotfl


User avatar
sndtgr08
Posts: 355
Joined: Sat Oct 30, 2010 4:40 am
Car: Altima Coupe 3.5SE MT
Contact:

Post

Sadly, after checking mine, I have hairline cracks starting on both doors. :tisk: Tiny at the moment and you need 20/20 to see them, I'm sure the dealership will tell me I'm Crazy :nono: , but they are there. I'm still under warranty and I will show them this thread so they can see what the next 25k miles will hold for me :facepalm: .....$5 says they will try and BS me and not sand, reweld and repaint.....Any takers?

Thank god I have a great bodyshop I trust. Would probly charge me $200 for both and the weld would be 10 times better. Who's idea was it to leave such ugly welds like that and just paint over it? It almost looks like they left a little split intentionally, like a zipper not zipped 100%. After looking I cant see how they would NOT expect it to split there. :tisk:

User avatar
rcboy514
Posts: 1354
Joined: Wed Feb 06, 2008 10:39 am
Car: 2013 VW Golf TDI 4dr 6-speed
2008 A/C 3.5 CVT (sold)
2004 BMW 545i V8 >:-)
1991 BMW 535i I-6

Post

I checked and i've got small cracks too. :-( I think we need to petition for a recall/repair free of charge. This is affecting more than just 1 or 2 people.

Just_K_
Posts: 7
Joined: Mon Sep 19, 2011 9:12 pm
Car: 08 Nissan Altima Coupe

Post

Checked mine.. no cracks or rust

User avatar
sndtgr08
Posts: 355
Joined: Sat Oct 30, 2010 4:40 am
Car: Altima Coupe 3.5SE MT
Contact:

Post

rcboy514 wrote:I think we need to petition for a recall/repair free of charge. This is affecting more than just 1 or 2 people.
+1 Im in, Sign me up. This is BS. The car is 2 years old wtf.

User avatar
IBCoupe
Posts: 7534
Joined: Sun May 17, 2009 11:51 am
Car: '08 Nissan Altima Coupe 3.5SE
'19 Infiniti QX50 FWD
'17 BMW 330e iPerformance
Location: Orange County, CA

Post

Cracks & rust on mine; no photos yet. Maybe this weekend. Anybody gotten any quotes on repair?

User avatar
J Russ
Posts: 242
Joined: Thu Mar 18, 2010 2:24 pm
Car: 2016 Audi S5 - Many Mods
Location: Guelph,ON

Post

I just noticed on mine that I have a small chip on my driver door and rust starting to form... I've had the car for a little over a year and Its been in dry Arizona for all of it! Now its in Canada and I'm expecting more rust to form throughout the winter!!!

User avatar
jahn surf irie
Posts: 47
Joined: Tue Aug 10, 2010 8:39 am
Car: '10 Altima Coupe 2.5s
'96 Mazda MX-5
Location: Northern Maryland
Contact:

Post

holy crap thanks for the post prlwhitecoupe, just checked my car out and saw exactly what you mean! :rolleyes:

my car is barely a year old and here's how mine looks, the pics look horribly worse than in person though. :tisk:

driver door:
Image
Image

passenger door:
Image
Image

We should all definitely keep on top of this bs!

User avatar
BadaBing7189
Posts: 153
Joined: Fri Jul 16, 2010 6:14 am
Car: 08 Altima Coupe SL
Location: Tri State Area

Post

will post pics of my damage soon -_-

AlexN09
Posts: 1051
Joined: Sat Jun 11, 2011 7:07 am
Car: 2011 Nissan Altima Coupe S 2.5
Location: Nashville, TN

Post

Yep I'm driving a coupe I bought brand new in May or June and it's got a chip off the paint and a spot of rust on the driver's side.

tomsteele01
Posts: 23
Joined: Mon Sep 19, 2011 12:05 pm
Car: 08 Altima Coupe SE 3.5 / Racingline FSB/RSB/y-pipe/traction bars / Custom Exhaust / Eibach drop / AEM Intake

Post

So I just got back from getting an estimate just in case they would not cover. They found what the cause of the crack is...misaligned door. At the top side of the door, the black tape is rubbing off against the rubber seal of the car frame if that makes sense. If you look at the top of the passenger door and the driver side when closed it will look different. The stress from the door closing on driver side will cause this crack. So by just repairing the crack it is not going to do much good, door will need to be aligned properly. I'll try and post pics later.

User avatar
sndtgr08
Posts: 355
Joined: Sat Oct 30, 2010 4:40 am
Car: Altima Coupe 3.5SE MT
Contact:

Post

Talked to a dealership this weekend, waiting for some answers.

nissansp
Posts: 91
Joined: Tue Oct 04, 2011 8:32 pm
Car: 2008 altima 3.5se

Post

I brought my car in on saturday I noticed the cracking is very small but you can tell its starting. They made it like nothing out of the ordinary.. Please keep us posted on what they tell you or do for you?

mmkeller
Posts: 1964
Joined: Mon Sep 07, 2009 3:30 am
Car: 2017 Maxima SR
2009 Murano SL
Location: Texas

Post

So was it misaligned at the factory or did the hinge loosen over time? Looks like both would be covered by Nissan.

tomsteele01
Posts: 23
Joined: Mon Sep 19, 2011 12:05 pm
Car: 08 Altima Coupe SE 3.5 / Racingline FSB/RSB/y-pipe/traction bars / Custom Exhaust / Eibach drop / AEM Intake

Post

Nissan covered the repair for me. Hopefully it lasts, I dont know the difference between a good weld and a bad weld.

nissansp
Posts: 91
Joined: Tue Oct 04, 2011 8:32 pm
Car: 2008 altima 3.5se

Post

my driver door is cracked well i guess i have to start with the dealer soon cause I know there not going to willingly fix it


but congrats on ur fix.

User avatar
HumbleCali
Posts: 168
Joined: Sun May 01, 2011 11:24 pm
Car: Coupe 2012!

Post

**deleted**
Last edited by HumbleCali on Mon Oct 24, 2011 5:04 pm, edited 1 time in total.

User avatar
HumbleCali
Posts: 168
Joined: Sun May 01, 2011 11:24 pm
Car: Coupe 2012!

Post

I took pictures of mine, is this considered normal? Its a small amount of cracking?? Idk, Id like to see what people who are saying their doors are fine look like to compare.

Image

Image

Image

tomsteele01
Posts: 23
Joined: Mon Sep 19, 2011 12:05 pm
Car: 08 Altima Coupe SE 3.5 / Racingline FSB/RSB/y-pipe/traction bars / Custom Exhaust / Eibach drop / AEM Intake

Post

The first pic looks how mine looks now minus the crack...

User avatar
HumbleCali
Posts: 168
Joined: Sun May 01, 2011 11:24 pm
Car: Coupe 2012!

Post

prlwhitecoupe wrote:The following are pictures of my drivers side and passenger door frames. Drivers side has developed a crack at the weld point with rust peeking through and passenger side looks like it is developing one as well. Everyone check your door frames for similar cracks. I have shown it to my service managee and he has taken pictures and will be talking to the dealer rep. to see if they will possibly repair it. I still have another year left for warranty on corrosion/rust. Have not had an estimate done yet. FYI keep your eyes on this and post it and approach your dealership. This is obviously a manufacturing defect so it will be interesting to see what Nissan tells the dealership.

No amount of strut and sway bar installation or "lack of bodyflex" would cause such structural failure (I assume worst case scenario as an excuse by Nissan). It is a tack weld point, which I assume is performed by a robot at the assembly plant.

Hey man, so what do you think of the pictures I posted of my door frame? They are above, is that normal or an issue?

Thanks

djjsarai
Posts: 47
Joined: Mon Sep 26, 2011 6:48 pm
Car: 2008 Nissan 350z
2010 Nissan Altima Coupe (SOLD)
2005 Nissan Sentra 1.8S Special Edition
Location: Commerce City, Colorado

Post

I took my 10 Altima coupe to the dealer yesterday and they said that the weld is covered by body filler and primer, that the weld is not cracked its the filler/primer. they said they would take care of it if my cars under warranty, which it is. Most of the Nissan dealers will probably take some touch up paint and cover it up, like their going to do to mine. I already have touch up paint and have applied it, but I am taking my car to a friends shop to sand, check the weld and repaint it after making everything is all good and right.

User avatar
RicerX
Moderator
Posts: 2703
Joined: Thu Jan 29, 2009 9:36 am
Car: '20 Titan Pro4X
Location: Southeastern US

Post

After going through this thread I think I will be checking my 2010 today.

User avatar
ohwowbeau
Posts: 10
Joined: Sun Dec 11, 2011 8:36 pm
Car: 2008 Altima Coupe 2.5S

Post

just checked mine, same cracks and rust as mentioned by everyone else.. looks like nissan is taking care of it so will be going to visit them soon

User avatar
prlwhitecoupe
Posts: 515
Joined: Sun Jun 17, 2007 7:55 pm
Car: 2008 Pearl White Altima Coupe 2.5 S w/CVT & Premium Pkg.

Post

WOW haven't been back in over a year....sorry guys. But been busy with life.. anyways i see this thread has blown up. Looks like a legit issue. Guess ppl like me out of warranty are SOL unless those s*** heads at Nissan can start a technical bulletin.

MODS: since this seems to be a wide spread issue which obviously Nissan isn't addressing yet, even with new cars, why not make this a sticky? :squint:

User avatar
JerseyBoy201
Posts: 154
Joined: Tue Mar 25, 2014 8:15 pm
Car: 2008 Nissan Altima Coupe 3.5SE
Location: New Jersey
Contact:

Post

Image
Image
Drive and passenger side its very lil for me i got the 08 3.5SE model idk should i really be worried about this i mean i can get rust and corrosion remover and just maintain it here and there but it doesnt seem like its a major issue what you guys think ?!

User avatar
prlwhitecoupe
Posts: 515
Joined: Sun Jun 17, 2007 7:55 pm
Car: 2008 Pearl White Altima Coupe 2.5 S w/CVT & Premium Pkg.

Post

Just seems like a major design flaw....ahh yes good old American quality :gapteeth: . Maybe if it was actually manufactured in Japan. I wonder if the G37 has this issue? or remotely close to it? Since they share some of the same parts. :squint:

FADED12
Posts: 37
Joined: Wed Apr 03, 2013 6:29 am
Car: 2010 Altima
Crimson Black
2.5s
K&N intake, Infinity speakers. Working progress
Location: Orlando,FL

Post

As soon as I read the post I ran outside and im a victim of the crack. Lol

User avatar
RicerX
Moderator
Posts: 2703
Joined: Thu Jan 29, 2009 9:36 am
Car: '20 Titan Pro4X
Location: Southeastern US

Post

prlwhitecoupe wrote:Just seems like a major design flaw....ahh yes good old American quality :gapteeth: . Maybe if it was actually manufactured in Japan. I wonder if the G37 has this issue? or remotely close to it? Since they share some of the same parts. :squint:
The Infiniti G37 shares ZERO parts with the Altima Coupe.

User avatar
SanoSuKe
Posts: 1704
Joined: Wed Nov 02, 2011 8:26 pm
Location: New Jersey

Post

Stock, no. Aftermarket, yes.

xazilizax
Posts: 44
Joined: Fri Jan 31, 2014 1:59 pm
Car: 2008 NISSAN ALTIMA COUPE

Post

dangeris wrote:Mine is fine...no cracks or rust.

Maybe you should stop picking up fat chicks :naughty: ...Just sayin' yo :chuckle:
hahahahahahahahahah.......do the fat chicks sit on the door? hahaha


Return to “Altima Coupe (2008-2013)”