Uniqueautosports.com

Post by **s15nc** » Thu Jun 19, 2003 10:11 am

I dont think 600 is any savings. they charge 400 for the manifold and their sr fuel rails are 130. Now obviously the rb fuel rails are going to be more but they are problably what 200? so 200 + 400 = 600 so no savings.

Post by **Nathan** » Thu Jun 19, 2003 10:11 am

Yeah, I think they basically raised the prices on their manifold since it's the "new design". Oh, and the wheels didnt work out so I might be down for a manifold again, but not for 600 bucks...I might as well ship one from australia for that or have one custom made.

Post by **PROJECTRB240SX** » Thu Jun 19, 2003 10:11 am

THE AUSSIE ONE ISN'T THAT BAD.

Post by **s15nc** » Thu Jun 19, 2003 10:11 am

have you gotten any more pictures of the aussi one?

Post by **dcdrifter** » Thu Jun 19, 2003 10:11 am

I am definatly down for a gb. I am in desperate need of an aftermarket intake manifold. I just cant see getting all the plumbing for a fmic for the stock intake and then getting all new plumbing for an aftermarket one. Does anyone know if the two intake manifolds in question can bolt up with a q45 throttle body?

Post by **PROJECTRB240SX** » Thu Jun 19, 2003 10:11 am

THEY BOTH COME WITH THROTTLE BODIES I THINK.

Post by **PROJECTRB240SX** » Thu Jun 19, 2003 10:11 am

GO TO THE FIRST PAGE FOR A PIC.

Post by **dcdrifter** » Thu Jun 19, 2003 10:11 am

They both come with which throttle body? The greddy intake mani is setup for a q45 90mm throttle body. I was just asking if either of these are.

Post by **PROJECTRB240SX** » Thu Jun 19, 2003 10:11 am

I KNOW FOR SURE THE AUSSIE ONE COMES WITH A THROTTLE BODY, I THINK ITS EITHER Z32 OR STOCK. UH, I THINK IT DOES BUT AM NOT TO SURE.

Post by **Nathan** » Thu Jun 19, 2003 10:11 am

Ok, what we need to do is figure out exactly how much the aussie one will cost with shipping, how much the UH one will cost with shipping (both with and without the new fuel rail) and if possible how much a greddy one would cost with shipping. Then, we can see which one everyone favors and make a desicion on which to try to do a group buy on

Does this sound good?

Post by **PROJECTRB240SX** » Thu Jun 19, 2003 10:11 am

THE AUSSIE ONE IS $750 ROUGHLY AND $250 BULK SHIPPED TO MY PLACE OF BUSINESS THEN ADDITIONAL SHIPPING TO EACH ORDERER.

Post by **PROJECTRB240SX** » Thu Jun 19, 2003 10:11 am

THATS AT 15+ PURCHASERS MORE THAN 20 WOULD MEEN MORE OF A DISCOUNT.

Post by **s15nc** » Thu Jun 19, 2003 10:11 am

$750 is some BS. For international orders he does not have to pay GST (sales tax) but he is giving you a "discount" on the price that includes tax. Without tax we should start talking at $735 or $AUD 1227 and then a group discount on top of that.

Post by **PROJECTRB240SX** » Thu Jun 19, 2003 10:11 am

OK MY CALCULATIONS ARE ALITTLE OFF, YOU ARE RIGHT. ITS 12% TAX. WHATEVER BASE PRICE IS THEN MINUS 15%. THATS WHAT WAS QUOTED. HE SAID AN EXACT QUOTE WASN'T POSSIBLE AT THE TIME BECAUSE CONVERSION RATES FLUCTUATE SO MUCH.

Post by **s15nc** » Thu Jun 19, 2003 10:11 am

that is $680 with the current exchange rate

Post by **s15nc** » Thu Jun 19, 2003 10:11 am

The US dollar has plumated against the aussi dollar and is really weak right now.

Post by **RubHamuSan** » Thu Jun 19, 2003 10:11 am

RubHamuSan wrote:i've seen the others and they were a plenum to bolt on .this unit has short runners and is one solid unit.

like i said it was a bolt on plenum. the original runners stayed on the head. and the upper plenum was swaped out. and it was steel. not alum.

the new one is a whole unit. kinda in the same sense as a greddy unit.

but it's your call do what you want. i'm getting one.

Post by **s15nc** » Thu Jun 19, 2003 10:11 am

Ha Rub I now have more posts than you.

Post by **Nathan** » Thu Jun 19, 2003 10:11 am

Well right now the uh one is winning out because it"s a good bit cheaper.

Post by **RubHamuSan** » Thu Jun 19, 2003 10:11 am

93semax wrote:Who are you? Are you the reason my rb s14 isn't done yet? :pface

????????????????????

Post by **RubHamuSan** » Thu Jun 19, 2003 10:11 am

s15nc wrote:Ha Rub I now have more posts than you.

oh yeah.

Post by **dcdrifter** » Thu Jun 19, 2003 10:11 am

$750 is ridiculous, I can get a greddy intake for $726 w/out a group buy. I know that this price is w/out a fuel rail but still.........

Post by **s15nc** » Thu Jun 19, 2003 10:11 am

where can you get the greddy intake manifold. give us a link

Post by **s15nc** » Thu Jun 19, 2003 10:11 am

also the price was 680 with the current exchange rate

Post by **s15nc** » Thu Jun 19, 2003 10:11 am

93semax wrote:Who are you? Are you the reason my rb s14 isn't done yet? :pface

RubHamuSan wrote:????????????????????

he is having unstable hybirds do his rb swap. so I think his point is that you are distracting them from finishing the job

and I'm back on top now too

Post by **RubHamuSan** » Thu Jun 19, 2003 10:11 am

s15nc wrote:he is having unstable hybirds do his rb swap. so I think his point is that you are distracting them from finishing the job

and I'm back on top now too

oh ok...man can anyone spell there name correctly?i've seen hybrides,hybirds.lol...just noticed that.

Post by **dcdrifter** » Thu Jun 19, 2003 10:11 am

http://www.takakaira.com

Post by **dcdrifter** » Thu Jun 19, 2003 10:11 am

search for intake plenum for an rb25det

Post by **cvc9216** » Thu Jun 19, 2003 10:11 am

takakaira charges 3% for credit card purchases, so the price is $749. plus you have to add maybe $50 for shipping.

Post by **cvc9216** » Thu Jun 19, 2003 10:11 am

I'd still rather have the Greddy. can't you use GTR injectors and fuel rail with the Greddy manifold?

Uniqueautosports.com

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums