Turbo install finally completed

Post by **fiznat** » Sat Jul 17, 2004 5:12 pm

which forge intercooler is that.. whered you get it?

I'm intercooler shopping

Post by **bruinbear714** » Sat Jul 17, 2004 5:12 pm

WDRacing wrote:Bruinbear is running a stone race?

I have the tial sport 38mm wastegate.

Post by **BoostFab** » Sat Jul 17, 2004 5:12 pm

post pictures in the Member's Ride section...imagestation suks

Post by **fastpace** » Sat Jul 17, 2004 5:12 pm

fiznat wrote:which forge intercooler is that.. whered you get it?

I'm intercooler shopping

Got it from jgycustoms for 340 bucks, fits and works pretty well for the price.

Post by **Projex240** » Sat Jul 17, 2004 5:12 pm

stone race/ tial 35mm are the same design---i dont see what the downside could be to useing a stone race. Its not like its really a compicated design or a complicated peice of engineering genious.

I have a stone mountian one too

Post by **fastpace** » Sat Jul 17, 2004 5:12 pm

Well mine was *****ed up, the boost just kept on going up. luckily I had the fuel management for my setup, or my motor would have went to hell. I just recently tested my tial wastegate and there is a huge difference, it holds boost very well.

I understand what you mean about the design shouldn't be to complicated, but there has to be something wrong with the stone racing wastegates.

Post by **Projex240** » Sat Jul 17, 2004 5:12 pm

nah--the fact your boost kept goin up--the wastegate probably had the wrong spring in it. The wastegate only uses a metal valve looking deal and a spring. Vaccum to control whent he spring opens, etc. Stone, turbonetics, tial, hks, all use the same internal design. They probably sent you the wrong spring. I have heard that happen before.

Turbonetics daltegates had that happen alot--they send out 12 lb springs when the spring was set for like 7 lbs.

-josh

Post by **fastpace** » Sat Jul 17, 2004 5:12 pm

When I tested out my wastegate it felt really stiff. So I bought a 0.4 bar spring and it still boosted to 1 bar.

Post by **Projex240** » Sat Jul 17, 2004 5:12 pm

yuck---id have been pissed. damn--did they give you your money back on it or anything?

Post by **j-z** » Sat Jul 17, 2004 5:12 pm

bruinbear714 wrote:My wastegate came with a ring that fits over the wastegate, and will not fit inside the manifold wastegate flange.

However, if I don't use that ring, then it'll mate perfectly.

use the ring and just mount the wg on the flange how you describe it to be. its meant to be used that way.

Post by **fastpace** » Sat Jul 17, 2004 5:12 pm

Projex240 wrote:yuck---id have been pissed. damn--did they give you your money back on it or anything?

nah, i didn't worry about it. I took my loses and am just going to learn from my mistake

Turbo install finally completed

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums