Track results

[BoostFab]

Quote »R/T .66360' 2.101330' 65.7661/8 [email protected] mph1/4 [email protected] mph[/quote]with slicks or drag radials, i believe you can break 12-secs

[dekand]

Nice #'s! I ran friday night too with my RB25 S13. I have 3" turboback exhaust and 10 psi of boost. I also have a cone filter. This is my best run

60ft 2.1391/8 9.026 @ 79.78 MPH1/4 13.810 @ 104.76

I dynoed 230 WHP 3 weeks ago. I am running stock clutch with my street tires. I am ready to buy some good rubber for the rear. What size will fit on the stock S13 wheels? I am thinking of going ES100's or Azenis.

230 seems low for the mods, you still running smic?

not a bad time though, considering a bad clutch and crappy tires...

[rbsileighty]

He has that Hybrid FMIC, the one that has been discussed recently, if I'm not mistaken. Try this calculator for the ~HP and what 100lbs will do (two birds one stone):http://www.turbofast.com.au/Drag.html

As far as tires, jump on the suspension forum... some smart guys on there for that question.

[Imissmyturbo]

230 seems low for the mods, you still running smic?

not a bad time though, considering a bad clutch and crappy tires...

I still have the stock SMIC. I have an FMIC in my garage. Once that is on I plan to run 12 psi and see what she will do.

[f150intally]

I bought a second pair of stock alloys from a junkyard for $60 and mounted some BFGoodrich G-Force T/A Drag Radials 225-50-15 on them. I just switch them out when I get to the track.

-Jay