This just in from Okinawa: UPDATE V. 2.0

[Gold Digger]

So, as some of you may know, themadscientist has done some strange things. Look here.

zerothread?id=154720

I have purchased that part from him and will be placing it on the Laurel within the next few weeks...



It's going to be dropped off at the tuner shop tomorrow to be cut and re-welded back to it's original postion, cleaned and polished, then put on the Laurel.

I can't wait to get on the highway and open this bad ***** up....

[BallzDeep1.9L]

that is some Mega-Sic JDM Bukake drifting hottness....

[themadscientist]

Punch a hole in your hood you wee fairy! The two-foot downshift fireballs are worth it.

[Joe]

Punch a hole in your hood you wee fairy! The two-foot downshift fireballs are worth it.

+0932148967`02673069`03-5`32509

dont be a ***** i want to see hood fireballs.

[Chaos the Xile]

The best is, downshift on the highway and scare the S*#& out of the cars around you when you launch a 3 ft flame! They'll never pull up on you again! HAHAH!

[themadscientist]

I used to use it to drown out the teenagers on the bikes with the open exhuasts. They roll slow in big packs and rev their engines like musical instruments. No brokeass 400cc bike could out rip my RB spitting fire through the hood. Them bishez would usually just stop until I had passed by. pen15 envy at it's finest

[l0nestar]

Dude!

I so totally want to see fireballs! That would be _awesome_!

[Gold Digger]

Guys, as much as I would love to be like The Mad One, I have my reasons for putting it back to stock, and I am sure some of you could agree with my decisions.

1. This is my family mover. I do take long trips in this thing, and the last thing I want to do is draw attention to myself with my family in the car with it shooting flames out the hood.

2. I really don't want to cut the hole in the hood. I still have to make this thing pass sha-ken inspections.

3. My car gets dirty enough being white, I really don't want to deal with carbon buildup on my hood, window and roof.

4. My ultimate plan is to have it exit on the passenger side, just behind the front wheel, all race car like.

Anyway, thanks for the comments.

[SienSil80]

I tried to convince him to put it out the hood like a man but no dice.

[Bronze MFP]

dude, just install it like it is for now, take off your hood, get some good vids, then put it back to stock when you're done. do it for the greater good of man!

[l0nestar]

I'm totally with Bronze MFP on this. Throw it on, pull your hood. take some videos, then put it how you want it. It would be totally kick-***!

[SienSil80]

I would agree but I'd likely have to then help install it twice instead of once and that's not so bueno

[Bronze MFP]

f-it, ship it to me, i'll do it since none of your nads have made it down to your sacks yet, and i'll even pay for return shipping! win win!send me a duck call and i'll tape that to the bov for ultimate awesomeness

[nismofly]

ill be eagerly awaiting video coverage

[Gold Digger]

well, the screamer has been dropped off at the shop for re-welding and polishing. Should have it in about a week and will try to install it soon aftarward. I got a holiday coming in March, so it might have to wait till then.

[Bronze MFP]

awww wouldnt have cleared my steering shaft probably.

hope it works well for you. rb20's sound mean with open waste gates

[Gold Digger]

Update on the screamer.

Well, after a month in the shop, I finally got the screamer back today, and was I surprised at how it turned out. It did cost a little more that I was prepared to pay, but after seeing it, and the fact that he had to used a new section of tube for the wastegate exit and fab it up a bit to clear the O2 bung, I can see why it was a bit extra.

For a quick refresher on what it looked like upon receiving it from TMS...







And here is the now finished product, courtesy of Maruya Auto Stay Tire and Maintenence shop.













I can't wait to get this bish on my car....woot!!

[LayinLo]

Looks oh so nice!!!!!!!!!

[240sxautox]

Wow, that looks great man. I'm having to fab up a screamer pipe for my external wastegate as well, I'll be happy if it looks 1/2 as good as that.

[themadscientist]

sexy, you can send it back to me now.

[Gold Digger]

Thanks for the props guys. I hopefully will get it installed today, but it's highly doubtfull. All I can do is hope.

[JerryRigRB240]

Thanks for the props guys. I hopefully will get it installed today, but it's highly doubtfull. All I can do is hope.

All you can do is hope?

What kind of lame shyte is that. Get off your tuffy and just do it!

[rotorimp]

Punch a hole in your hood you wee fairy! The two-foot downshift fireballs are worth it.

I will comand my Tig to construct a screamer capable of 2' fire balls for my car!!!!!!!!!!!!!

Oh yes it will be mine!!

[themadscientist]

Thanks for the props guys. I hopefully will get it installed today, but it's highly doubtfull. All I can do is hope.

Bring your tools and park the car at work. Your class needs some practical application time. It could be a class project tonight. Repeat after me class "ouch my ****ing knuckles"!

[Blown240sx]

confused as to the point of this? It might make a bit more power but its going to be loud!!!

[krayton]

confused as to the point of this? It might make a bit more power but its going to be loud!!!

[Gold Digger]

confused as to the point of this? It might make a bit more power but its going to be loud!!!

Apparently, you have never been next to a car that hits full boost, then you hear this massive roar coming from the wastegate...for one, it scares the **** outta the people around you, and two, it sounds friggan awesome when it cracks open.

All you can do is hope?

What kind of lame shyte is that. Get off your tuffy and just do it!

With no garage, no floor jack or jack stands to get underneath the car, and not enough time to do it by myself, I think I can wait a few weeks till I have a week long vacation and tear into it.

[DJButton]

Sure you can wait a couple weeks... think of the poor soulds here waiting for that screaming madness!

[PantherRacer]

So if I vent my wastegate thru my hood I get fireball? along with mean *** sound? damn....uhh I think I'll just go for the mean *** sound. lol.

I want a split dump pipe for my SR. Where can I get one? TMS? Neal? any suggestions?maybe you could find some RB that's just sitting in a car all unloved and send it to me
Modified by PantherRacer at 10:12 AM 3/17/2007

[themadscientist]

Steering shaft would likely be in the way. We have more space to mess with driving RHD cars.