SYKO PERFORMANCE RB25DET INSTALLATION KIT GROUP BUY!!!

[Dnight07]

count me in as # 5, cool..?

[s14kouki]

1) adfhkqeyip (S13)2) GIJOE69 (S13)3) iamadirtdude (S13)4) Lost1_240sx (S14)5) Dnight07 (S14)

I have sent emails to all 5 screen names above, please reply whenever you have the time. Thanks

Anyone else who wants the kit for the special price of $550, you have until April 10th, 2007. This price is locked at $550 until then, only the 5 above will get the kit for $540.

-Henry

Modified by s14kouki at 11:48 PM 3/26/2007

Modified by s14kouki at 12:27 AM 3/27/2007
Modified by s14kouki at 4:24 AM 3/27/2007

[d-wade]

Count me in for the mount kit...Please let me know where too send payment?

[s14kouki]

Count me in for the mount kit...Please let me know where too send payment?

email sent!

[Lost1_240sx]

Just to clarify, you will need the RB25DET engine crossmember. For the transmission, you can either use the RB25DET trans. crossmember, or one out of an automatic 240SX (KA).

Wish I knew that earlier, now I gotta find a trans xmember. Are there any other parts from a front clip that people using motorsets need to use this kit?

[s14kouki]

Wish I knew that earlier, now I gotta find a trans xmember. Are there any other parts from a front clip that people using motorsets need to use this kit?

Transmission crossmember should be rather easy to find, especially since a lot of auto 240sx owners swap them out.

You need the RB25 crossmember, RB25 factory engine brackets, and the transmission crossmember(RB25, or automatic KA). All this information and more can be found at http://www.sykoperformance.com or here zerothread/234206

-Henry

[Sykoperformance]

Wish I knew that earlier, now I gotta find a trans xmember. Are there any other parts from a front clip that people using motorsets need to use this kit?

Most motor sets usually come with the trans. cross member attached. As Henry said, these are quite easy to find (if you don't get one on your motor set). Not really any other parts needed from the clip--unless you chose to run a stock SMIC.

[d-wade]

Will all RB series motors mount into any 240sx with Syko kit and R33 crossmember?

[Sykoperformance]

Will all RB series motors mount into any 240sx with Syko kit and R33 crossmember?

Hmmm...I guess the answer would be no. We do not have an RB20 kit or a DIY RB26DETT kit. As for the RB25DET, it will fit into any 89-98 240SX--with the exception of a few wrecked ones. We also don't have a kit for the RB30.

[d-wade]

Okay, Would the R34 Neo RB25DET engine mount into any 240sx with R33 cross member and Syko kit?

I had just sent payment for the Syko mount kit and I'm looking for a RB motorset. So I needed to know if their are any other options aside from the R33 RB25DET.

Thanks

[Sykoperformance]

We've never personally installed a Neo RB25DET with our kit. However, we sold one to a customer who did. We know he got the swap done but couldn't tell you if he ran into any issues. Looking at both crossmembers, brackets, etc., we don't see any visual differences. Should not be any problem.

If you run into any differences, let us know and we'll do our best to help you out. The wiring will probably be the toughest part. There are only few people that have experience with those harnesses. A qualified tech using a decent set of wiring schematics should have no problems with this. Doing it yourself might be a bit tricky.

[s14kouki]

Okay, Would the R34 Neo RB25DET engine mount into any 240sx with R33 cross member and Syko kit?I had just sent payment for the Syko mount kit and I'm looking for a RB motorset. So I needed to know if their are any other options aside from the R33 RB25DET.

Thanks

From what i know there is not any major, people run Neos with the mckinney mounts and mckinney does not offer a different kit when doing that swap. So that along with someone already using it on a Neo that has not reported problems, i would have to conclude that it will work fine.

[s14kouki]

Group Buy ends in a week! April 10th 2007

We have already surpass the 5 person requirement so anyone and everyone who wants the kit can get it for $550+shipping right away! No waiting, just pay before the April 10th deadline and you lock in this deal!

-Henry

[iamadirtdude]

got my kit looks great thanks alot! as far as fans go, what should i look at for brands and sizes? name a few please if you know of some

[Lost1_240sx]

Just recieved mine today, can't wait till I get the rest of my parts so I can get the swap started.

as far as fans go, what should i look at for brands and sizes? name a few please if you know of some

I'm going with Flex-A-Lite dual 12" pushers. Heard they should fit without cutting the radiator support.

[iamadirtdude]

flexalites... ill check em out

[iamadirtdude]

whered you find a good price on them? i was thinkin the 210's are the slimest

[Lost1_240sx]

whered you find a good price on them? i was thinkin the 210's are the slimest

I'm purchasing them at a local shop because I can get a good deal from a friend. The 210's are pullers you need to get the 240 model.

[s14kouki]

Last weekend for this price guys! Get them while you can!

[JPsNissans]

I'm in.

[email protected] is the email, send me the payment info please. I assume I just need to send 580 to the paypal account listed?
Modified by JPsNissans at 12:59 AM 4/8/2007

[s14kouki]

email sent to ^^

For everyone else, i spoke to Syko Performance earlier today and was informed that another group buy will not be happening next month, so anyone else who wants the kit at this price email me at :

[email protected]

right away! Or ASAP, only a few days left!!!!

-Henry
Modified by s14kouki at 1:39 AM 4/9/2007

[s14kouki]

Last day guys! Either paypal me or get your checks postmarked by today!

paypal again is [email protected] me for a shipping address