Stillen Rockers

[adidas2go]

Picked up the Stillen Rockers today. Here are a few quick shots I took. I will drop them off at the paint shop tomorrow and install them Friday. Also I talked to Josh about the mud flap issue. Their shop car also had the mud flaps like 95% of all A/C's so the rockers are built to allow an original bolt over just like stock Enjoy

[mmadore118]

there going to look sick dude

[johnny_d]

these pictures look better than how the blue coupe looks ..... I'll have to see it in person on your car. Blake's first again

[mmadore118]

these pictures look better than how the blue coupe looks ..... I'll have to see it in person on your car. Blake's first again

ya i know ,

[adidas2go]

to bad i took every one of these pictures upside down...o well, picture them flipped over

[vballer22]

Nice man. Cant wait to see. That tv's HUGE!

[alphapig]

Nice man. Cant wait to see. That tv's HUGE!

And what exactly are you watching on that TV, may I ask?

Looks like Lustrous Bath Babes 4, volume 6, scene 2, if I am not mistaken

[adidas2go]

60 inch. Love playing Forza on that thing. Its like im really looking out of a 60 inch windshield! I have no idea wats on the tv either haha

[TheBourneAltimatum]

haha i just saw that! i dunno what the hell is on tv, something on TBS i think

is that what they call p0rn these days?

[alphapig]

haha i just saw that! i dunno what the hell is on tv, something on TBS i think

Don't be coy. We both know what you were watching.

I kid! Those rockers look 100% nicer than on the Stillen website. Can't wait till you get them on!

[vballer22]

And what exactly are you watching on that TV, may I ask?

Looks like Lustrous Bath Babes 4, volume 6, scene 2, if I am not mistaken

South park reference anyone? The lord of the rings episode where they have to return the tape?

[alphapig]

South park reference anyone? The lord of the rings episode where they have to return the tape?

Know what the actual quote was?

[dangeris]

Hey Blake. Does the rocker have that two step lip like the OEM one has? You know, the first lip is where the door would meet the second lip is the one going into the threshold of the door? Will you be doing a trial fit on the ride before getting it painted?

That's gonna look sick on the coupe!

[dldjros69]

You lucky dog

Is that a beer pong table?

[D-Roll]

It's gonna look sick!

[adidas2go]

Hey Blake. Does the rocker have that two step lip like the OEM one has? You know, the first lip is where the door would meet the second lip is the one going into the threshold of the door? Will you be doing a trial fit on the ride before getting it painted?

That's gonna look sick on the coupe!

Yea it has the same angle on top to match the oem fitment on the door ledge. Also it ended up not being a clip in. No worries tho. The OEM bolts holes on the front and back are used. Along the top will be the infamous double sided tape. Its not going anywhere. Im also going to break out the FSM this morning and pop off the OEM rocker to test fit the Stillen set

EDIT: Stock clips not used because the meeting point along the bottom of the OEM rocker is now extended a half inch lower, so we'll attach it at the top
Modified by adidas2go at 6:39 AM 3/12/2008

[Serkle K]

Damn it! looks like I have to wait till I get to work later to see them!

[adidas2go]

Is that a beer pong table?

sure is

my den is the beer pong room

[adidas2go]

Just for reference the removal and installation of the OEM rocker is in the FSM. Section: Exterior, Page 41. 9 clips under the bottom of the car, 1 screw in the front, and 1 screw in the rear I'm doing this write up because these are going to be a huge factor Stillen instructions since they don't exist yet. If there are any questions, let me know. They can all help towards final write up
Modified by adidas2go at 6:47 AM 3/12/2008

[adidas2go]

Heres some picture of the test fit. To take off the OEM rocker is fairly simple. Took about 10 min.

OEM Rocker



Test Fit: Stillen Rocker

[marcelo929]

SICK!!!!! those rockers look AMAZING on the coupe. stillen pictures didn't do justice to how good these look. Now that you posted pictures, Props bro. You have one sick ride

[LongBeachCoupe]

yeah stillen isnt doing the part justice with their pics... whats the clearance difference btwn the 2? What are you going to do to the back of the holes that are open?

[Mr. Music]

Thats sick man...

[Oside3.5]

Looks good Blake!

[Robs_altima]

yeah stillen isnt doing the part justice with their pics... whats the clearance difference btwn the 2? What are you going to do to the back of the holes that are open?

Yeah... I've always thought the same thing about their pictures. In fact I always wondered how a company can spend so much money developing their product and not take the time to snap some good pictures.

Pretty happy it's a replacement skirt and not an overlay... double sided tape is good as long as the urethane doesn't warp after it's taken out of the mold. Just got my 19" 5Zigen 5ZR's, Borla, springs, and Intake put on over the weekend so I'm a little short on cash but you can bet this is next on my shopping list.

[dangeris]

Dang! it does look good and you're right..the Stillen pictures doesn't do it justice! I'm definately ordering a set for my coupe! Thanks Blake for posting up the different angle shots!

BTW,..when you took off the rocker, I'm sure you had to have taken off the front splash guard / mud flap. Did you put it on the Stillen rocker to see if it would fit or compliment the look? If not, can you. If that request is too much or a PITA, I understand.

[Team STILLEN]

LOL.. Give us a chance! The part has been out for less than a DAY! Blake literally picked up the first production piece, before we even wrote the instructions or installed it back onto our own vehicle.

Once we can get them installed on our A/C and painted, we'll be taking the car back into the studio for the official shots.

We could have kept it a secret and hidden..

[seekinsp]

Sick and slick dude! I have been waiting to see how these look so that I can invest in the whole front facia/rocker kit.

Wonder how these would look painted black with a precision grey body?

[quick_shift]

looks sick, cant wait to see them painted and installed

[LegendRacer]

LOL.. Give us a chance! The part has been out for less than a DAY! Blake literally picked up the first production piece, before we even wrote the instructions or installed it back onto our own vehicle.

Once we can get them installed on our A/C and painted, we'll be taking the car back into the studio for the official shots.

We could have kept it a secret and hidden..

lol hes a fast dude.... id be as fast if not faster if i lived down there lol