SS Turbo Lines leaking..HELP

[duffman1278]

I attempted to start my SR today and I noticed later on that my SS lines were leaking oil from the oil inlet lines, on both ends. When I installed the lines I tightened them up to as far as they could could and ever retapped one of them and they fit like a a charm. For some reason now they leak oil slowly. I searched around but couldn't figure out anything. Any suggestions??? Also I could not find the fuel pump relay, I would greatly appreciate if someone could help me out with that, its an S13 SR into an S13.

[inertiadrft]

I think you overtighten the fittings and cracked'em...

[duffman1278]

How can I see this because it doesn't looked cracked at all.

[redtop91]

Unless the connection is brass to brass I always recommend using plumbers tape.

[duffman1278]

I used teflon tape to be sure but i'm going to be taking it out rite now and I didn't want to *sigh* Any recommendations while its out?

[redtop91]

If you have a UV light you can look at where the leaks/cracks are on the line.

[duffman1278]

Well all the leaks are coming from each end of the lines on the connections. And I just saw the water outlet line is also leaking

[duffman1278]

I think I just got it fixed but I'm still not getting any fuel to the fuel injectors, any help there?

[redtop91]

Pump.

[duffman1278]

OOO, forgot to mention, the fuel pump does work, I can hear it when I put the key in the ON position. I'm thinking its the relay? People have been saying something to do with the relay and its wiring?

[redtop91]

My first impression of the problem would say yes but I've never personally dealt with it and I don't want to give misinformation.

[S14-KOUKI-MONSTER]

Are you 100% sure that you have the fuel lines in the proper location? The fuel return line will be the one with the fpr at the end of it.

[duffman1278]

Yea I have them in the right location, I just verified it again and they were in the right spot. However when i checked the voltage on the relay I saw that top left pin had no voltage so I'm assuming there's my issue. Does anyone know where that wire leads to? I tried tracing it down but my wires are pretty crammed and its making it difficult to follow it.

[IanS]

if your pump is turning on, but no fuel is coming out the injectors, either the injectotrs are not pulsing, or the fuel lines are reversed.

[duffman1278]

Well I'm 100% certain the lines are in their correct spots but what do you mean by not pulsing?