Sr installation compared to a KA?

Discuss the RB20, RB25 and RB26 series engines.
mr_wizard
Posts: 553
Joined: Tue Nov 01, 2005 7:29 am

Post

How would you compare the two? Is one harder than the other to install? I'm doing an SR swap but RB's sound promising and all, but aren't they AWD? How would you convert that to a RWD S13? Basically, what im saying is, where would you get the transmission?


User avatar
lilskyline240
Posts: 1887
Joined: Fri Oct 14, 2005 9:55 am
Car: 90 240sx w/ rb30det

Post

mr_wizard wrote:How would you compare the two? Is one harder than the other to install? I'm doing an SR swap but RB's sound promising and all, but aren't they AWD? How would you convert that to a RWD S13? Basically, what im saying is, where would you get the transmission?
First of all, before asking do a little research on the RB series motor.....What RB motor are u talkin about?? the RB20det, RB25det, or RB26dett?? each one requires more fabrication.....like i said, research the RB series motor first, ull answer your own question....


y3llows14
Posts: 651
Joined: Sat Sep 14, 2002 8:34 pm

Post

First off, can I ask you a question? How old are you? Im pretty young too and is in the same boat as you are. This Rb swap things interest me too.

User avatar
lilskyline240
Posts: 1887
Joined: Fri Oct 14, 2005 9:55 am
Car: 90 240sx w/ rb30det

Post

y3llows14 wrote:First off, can I ask you a question? How old are you? Im pretty young too and is in the same boat as you are. This Rb swap things interest me too.
was that in reply to me??

User avatar
krayton
Posts: 1090
Joined: Tue Jun 24, 2003 11:10 am

Post

mr_wizard wrote:How would you compare the two? Is one harder than the other to install? I'm doing an SR swap but RB's sound promising and all, but aren't they AWD? How would you convert that to a RWD S13? Basically, what im saying is, where would you get the transmission?
its simple advanced biology my good man. insert peg A into peg B.

giggity giggty

User avatar
lilskyline240
Posts: 1887
Joined: Fri Oct 14, 2005 9:55 am
Car: 90 240sx w/ rb30det

Post

krayton wrote:
its simple advanced biology my good man. insert peg A into peg B.

giggity giggty
LOL...dont give him that idea....

User avatar
Nameless EJ6
Posts: 1228
Joined: Sun May 11, 2003 9:24 pm
Car: What the **** do you think.

Post

..or square peg into round hole for the people who don't know how to use the search feature.

User avatar
lilskyline240
Posts: 1887
Joined: Fri Oct 14, 2005 9:55 am
Car: 90 240sx w/ rb30det

Post


User avatar
krayton
Posts: 1090
Joined: Tue Jun 24, 2003 11:10 am

Post

Nameless EJ6 wrote:..or square peg into round hole for the people who don't know how to use the search feature.
thats what SHE said


User avatar
lilskyline240
Posts: 1887
Joined: Fri Oct 14, 2005 9:55 am
Car: 90 240sx w/ rb30det

Post


User avatar
lyon23
Posts: 379
Joined: Wed Apr 14, 2004 4:16 pm
Car: 95 240sx
Location: Florida

Post

Nameless EJ6 wrote:..or square peg into round hole for the people who don't know how to use the search feature.
I agree with this comment the most..What do you have to do to make a square peg go into a round hole? You would have to alter one of the two or make a change to both in order to still maintain some of their properties and still work together..is as simple as 2+2=5 right??

User avatar
lilskyline240
Posts: 1887
Joined: Fri Oct 14, 2005 9:55 am
Car: 90 240sx w/ rb30det

Post

lyon23 wrote:
I agree with this comment the most..What do you have to do to make a square peg go into a round hole? You would have to alter one of the two or make a change to both in order to still maintain some of their properties and still work together..is as simple as 2+2=5 right??
HAHAHHAHAHAHHA

User avatar
krayton
Posts: 1090
Joined: Tue Jun 24, 2003 11:10 am

Post

FYI guys, 2+2= 4

edit: yes, i just confirmed it on my TI-89 caluclator

User avatar
lilskyline240
Posts: 1887
Joined: Fri Oct 14, 2005 9:55 am
Car: 90 240sx w/ rb30det

Post

I tend not to trust the TI-89....let me go check my TI-83 plus silver addition....................................................

Hmmm, u are right, 2+2=4....coulda fooled me

User avatar
Kansei240sx
Posts: 1356
Joined: Mon Nov 01, 2004 10:17 am
Car: S13 - RB25 Circuit car
71 240z - street/track day car
AE86 - Daily Drizzle/track day car
Z31t - Paper weight/street car
Contact:

Post

Lmfao @ this thread.

y3llows14
Posts: 651
Joined: Sat Sep 14, 2002 8:34 pm

Post

lilskyline240 wrote:
was that in reply to me??
nahhh...I was typing the same time as you were. Man this is some funny ****.

sean8564
Posts: 3735
Joined: Mon Dec 27, 2004 1:08 pm
Car: 1993 Nissan GT-R V-Spec
1991 Nissan 300ZX TT Black
1993 Nissan Silvia
1990 Nissan 240SX Coupe RB25DET

Post

then if 2+2=4 is 4+4=6 or 8 i can not rember

User avatar
rbsileighty
Posts: 1694
Joined: Sun Feb 09, 2003 8:10 am
Car: 92 S13 Hatch w/ RB20 & 05 Audi S4 Avant 6MT

Post

Kamin must be out of town... someone want to lock this?

sean8564
Posts: 3735
Joined: Mon Dec 27, 2004 1:08 pm
Car: 1993 Nissan GT-R V-Spec
1991 Nissan 300ZX TT Black
1993 Nissan Silvia
1990 Nissan 240SX Coupe RB25DET

Post

why we are just starting to have fun.

User avatar
krayton
Posts: 1090
Joined: Tue Jun 24, 2003 11:10 am

Post

rbsileighty wrote:Kamin must be out of town... someone want to lock this?
shhhhhhhh. hes at sema

PARTY IN THE RB FORUM!

User avatar
krayton
Posts: 1090
Joined: Tue Jun 24, 2003 11:10 am

Post

sort of close to off topic. heres a pic he sent me from the city of sin


WTBs14
Posts: 110
Joined: Mon Jul 04, 2005 1:24 pm

Post

well like they say if you research you will find it all on the forum. First the only awd rb is the rb26. You will need a stash of cash to do that swap lol

sean8564
Posts: 3735
Joined: Mon Dec 27, 2004 1:08 pm
Car: 1993 Nissan GT-R V-Spec
1991 Nissan 300ZX TT Black
1993 Nissan Silvia
1990 Nissan 240SX Coupe RB25DET

Post

now that is just sweet.

User avatar
Wulfgang
Posts: 908
Joined: Tue Oct 28, 2003 5:41 pm

Post

I'm trying to figure out those fans... are the blades those curved things or the flat things? And who makes them?

User avatar
Wulfgang
Posts: 908
Joined: Tue Oct 28, 2003 5:41 pm

Post

Btw, you guys suck with your TI calculators. Get the HP. My HP 48GX says

2 + 2 = pi * Plank's constant.

User avatar
krayton
Posts: 1090
Joined: Tue Jun 24, 2003 11:10 am

Post

Wulfgang wrote:I'm trying to figure out those fans... are the blades those curved things or the flat things? And who makes them?
no clue who makes them. when i talk to him later ill try and find out. id love a set though. probably start pulling the car forward

DanCouga
Posts: 802
Joined: Mon Mar 14, 2005 4:23 pm
Car: 1997 Nissan 240sx

Post

WTBs14 wrote: First the only awd rb is the rb26.
Actually, the GTS4's RB20 is AWD and the Stagea RS-Four had an AWD RB25(I believe)

User avatar
krayton
Posts: 1090
Joined: Tue Jun 24, 2003 11:10 am

Post

Wulfgang wrote:Btw, you guys suck with your TI calculators. Get the HP. My HP 48GX says

2 + 2 = pi * Plank's constant.
my TI would destroy your HP 48gx

User avatar
Dano
Posts: 11535
Joined: Tue Oct 29, 2002 8:01 pm
Car: '05 Nissan Frontier Nismo CC
'95 Nissan 240SX base
Location: Kansas City, KS/ Phx, AZ
Contact:

Post

DanCouga wrote: Stagea RS-Four had an AWD RB25(I believe)
yup, that is correct

you guys just wait till Joe gets back...

im telling u know, run and hide...run and hide....

-Dan

User avatar
krayton
Posts: 1090
Joined: Tue Jun 24, 2003 11:10 am

Post

240sx2nr95 wrote:
yup, that is correct

you guys just wait till Joe gets back...

im telling u know, run and hide...run and hide....

-Dan
he is gonna be soooo hungover or even drunk, that he wont care


Return to “RB20DET / RB25DET / RB26DETT Forum”