Someone PLEAE HELP!!!! I and am wiggin out.

[JonPowell]

I don't have the Rb25 code on my block or any code for that matter, weird.

Clean the spot...it's there.

Finally got a pic.and what senor is that in the second picture It is stripped COMPLETELY round. any hints on how to remove it if I have to.

5th gear sensor, not really necessary unless you want a speed limiter.

Vise grips if you NEED to remove it.

[Andrew85cm]

That sensor is to wire in your reverse lights. At least that is what it is for on my RB20 I am sure it is the same.~ANDREW~

[Andrew85cm]

Well Powell knows all sorry misinformation.~ANDREW~

[Miata Master]

Thanks everyone. I contacted Venus and got a qoute of 150 w/ shipping for the aluminum block mounts. I am making JDMpowerplants pay for them along with everything else they stripped from my clip.

5th gear sensor thanks If I dont need it it can stay in for all I care. the reverse sensor is the sensor close to the shifter about 5 inches infront If I remember right.

Soon as I get those new mounts the engine is goin in. Thanks again for all the help. Will definite stay on this forum. I'm a big AF.com fan too.