this is the sensor i got from dammitboy, he said it should work just like the sensor with fins insteadneedforjdm wrote:can u take photos on your blower motor resistor?we can help u to verify whether u getting the right stuff
it's blowing non stop, the off button doesn't even shut it off. I have a b/r from the 7 pin that is supposed to go somewhere but every spot I've tried doesnt help me get blower options,positronone wrote:So is your blower motor not working at all or is it just on all the time and you can't control it with the on/off button? If it's not working at all then you need to plug in the big blue relay under the dash. That's the one I had to pull before I got the right resistor in order to turn off my constantly blowing blower motor.
I didn't splice any of the wires.iiymij wrote:positronone, did you splice them and get the same results even after you spliced it?
Modified by iiymij at 10:39 PM 6/17/2007
Did you ever get your blower motor figured out? I have your answer if you did not!iiymij wrote:bump* so close yet so far
Broadfield wrote:
Did you ever get your blower motor figured out? I have your answer if you did not!
The blue/red wire on the JDM sub harness needs to go to IGN. I hooked it in with my radio. You can also hook it up to the heavy gauge blue/red on the blower motor.iiymij wrote:thanks for that information Broadfield! I'll try it out as soon as possible and even probably give you a call when I'm doing it lols
i havent tried plugging in both fan relays and as for the blue red wire, i can still hook that up with my extra blower harness I split right?
Broadfield wrote:
The blue/red wire on the JDM sub harness needs to go to IGN. I hooked it in with my radio. You can also hook it up to the heavy gauge blue/red on the blower motor.
Broadfield wrote:You need to grind down the lower fins, pins, columns whatever you want to call them. That is why it blows at full speed and you can't turn it off. I explained it above. Until you grind those down it is not going to function properly. You may have other issues, but until you get that ground down, you won't be able to figure out the other issues.
GRIND NOW!