setting timming on ka24e???

[darkone]

i was told be fore you can set the timming on a ka24e you have to unplug somthing to take the computers controll of the timming away is this true and if it is what is the thing i need to unplug?

[gniknave]

You may want to try the Nissan Tech Help forum, or the KA forum. You might not get much help in the General Chat area where we have discussions on everything from kids being allergic to peanut butter, to Michael Jackson.

Use this----> upper right hand corner

This may also help you figure out the search thing. Figure that out and the info you get will keep you coming here for years! zerothread?id=105819

[Nismo_Freak]

i was told be fore you can set the timming on a ka24e you have to unplug somthing to take the computers controll of the timming away is this true and if it is what is the thing i need to unplug?

TPS - Throttle Position Sensor; located on the throttle body, should be a 3 or 4 pin plug.

Your engine should be set to 15 BTDC, or 17 BTDC if you want a little better pick-up (this will require higher octane fuel)

[darkone]

thanks will try when sun comes up.

[Nismo_Freak]

Cool lemme know.

[darkone]

can't try read post 89 240 bit dust