s14 with s13 speed sensor????

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
afmafia
Posts: 438
Joined: Sat Mar 19, 2005 8:02 am

Post

i have a 98 240sx with an s13 blacktop what speed sensor do i need to make my speddo work thanks


AJ1356
Posts: 669
Joined: Tue Feb 17, 2004 7:45 pm

Post

use the speed sensor from your KA transmission. that way it would read your speed in miles not kilometers.

User avatar
IanS
Posts: 9758
Joined: Thu Dec 23, 2004 3:07 pm
Car: 2002 Subaru WRX, 2010 Subaru Forester XT, 2004 Infiniti G35 Coupe.
Location: Esko, MN
Contact:

Post

yes, you will need to use the one off your KA transmission, only problem is the one on the SR has about 2 feet of wire on it, then a plug, but the KA sensor has the plug directly on it. What I did was cut the wires off the SR sensor and break the plastic off around the KA sensor plug, then I just sodered the wires right to the pins. If you have a KA shop manual you can look up which wire is positive or negative so you can connect them to the right place. If you dont, I can look it up for you. Or just check mine


Return to “SR20DET Forum (rear-drive)”