S13 Under Engine Cover/Skid Plate available for KA/SR/Greddy Oil Pan

A forum for approved vendors of specialized, limited-production parts. Help small businesses that cater to Nissan enthusiasts and score some unique, useful parts! Contact greg@nicoclub.com for approval and rates.
94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: (sultan)

Postby 94_240sx » Fri Feb 27, 2009 11:29 am

sultan wrote:not that anyone else will try it but it is possible to remove the stock sway bar and install an aftermarket one without removing the skid plate. hahahhaa
Sorry dude, no way. You won't have access to the bolts.


User avatar
sultan
Posts: 1804
Joined: Fri Jul 26, 2002 5:40 am

Postby sultan » Fri Feb 27, 2009 11:54 am

mine doesn't cover the sway bar bolts, just swapped out the sways so i know it's possible.

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: (sultan)

Postby 94_240sx » Fri Feb 27, 2009 12:02 pm

sultan wrote:mine doesn't cover the sway bar bolts, just swapped out the sways so i know it's possible.
Hmm... Sorry, I thought there was not such room, but it looks like you can take it out.

User avatar
glitched
Posts: 1860
Joined: Fri Jun 25, 2004 8:20 am
Car: 1992 240sx se
Contact:

Postby glitched » Sun Mar 08, 2009 6:15 pm

any chance the version 1 will fit with an RB20? what about getting some made for RB's?

User avatar
Stripes
Posts: 843
Joined: Wed Sep 19, 2007 12:24 pm
Car: hatch, coupe
Contact:

Re: (glitched)

Postby Stripes » Sun Mar 08, 2009 6:27 pm

How much for one of these bad boys without any oil drain hole cut out shipped to 19934. My reason for not wanting an oil drain hole is because I will be using a Moroso oil pain within a couple weeks and I think neither I or you know where to cut for that.

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: (Stripes)

Postby 94_240sx » Mon Mar 09, 2009 2:36 am

Stripes wrote:How much for one of these bad boys without any oil drain hole cut out shipped to 19934. My reason for not wanting an oil drain hole is because I will be using a Moroso oil pain within a couple weeks and I think neither I or you know where to cut for that.
Sorry, all of them have holes. I should have made some without the drain hole. You are the second person asking for this.
glitched wrote:any chance the version 1 will fit with an RB20? what about getting some made for RB's?
Sorry, I won't make them anymore, so all I have is for KA/SR.

jpizzlemtg
Posts: 1
Joined: Wed Apr 29, 2009 9:14 pm

Re: S13 Under Engine Cover/Skid Plate available for K ... (94_240sx)

Postby jpizzlemtg » Wed Apr 29, 2009 9:16 pm

Hey man I was wondering If I bought one of these from you could I throw you a tiny bit more and you could throw me the hardware ? thx

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: S13 Under Engine Cover/Skid Plate available for K ... (jpizzlemtg)

Postby 94_240sx » Thu Apr 30, 2009 1:36 am

jpizzlemtg wrote:Hey man I was wondering If I bought one of these from you could I throw you a tiny bit more and you could throw me the hardware ? thx
Email sent!!

w0nderbr3ad
Posts: 120
Joined: Sun Mar 28, 2004 5:59 pm
Car: 1990 240sx with ka24de swap
Contact:

Re: (94_240sx)

Postby w0nderbr3ad » Thu May 07, 2009 7:21 pm

Dammit I really need one but I won't have money till next week. Are those plastic spacers you have on the bolts?

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: (w0nderbr3ad)

Postby 94_240sx » Fri May 08, 2009 1:38 am

w0nderbr3ad wrote:Dammit I really need one but I won't have money till next week. Are those plastic spacers you have on the bolts?
Yes, they are nylon spacers that you can buy from hardware store.

gnvarnadore
Posts: 1092
Joined: Fri Jan 05, 2007 8:54 am
Car: 89 240sx Base Coupe(daily/project) 91 240sx SE Coupe(sold) 92 240sx SE Coupe(sold) 89 240sx Base Hatch(sold) 93 240sx SE Hatch(SOLD!!!)
Contact:

Re: (94_240sx)

Postby gnvarnadore » Fri May 15, 2009 5:10 am

hey man you still have any of the skid plates for the KA with stock oil pan? i was thinking of having one made but thought to search on here first.

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: (gnvarnadore)

Postby 94_240sx » Fri May 15, 2009 5:22 am

gnvarnadore wrote:hey man you still have any of the skid plates for the KA with stock oil pan? i was thinking of having one made but thought to search on here first.
Yes, I have it.

Guys, I have plenty of them, so just pay $80 to sooky @ hotmail.com and I usually ship it next business day. You don't even have to email me and ask about it. I'll post here and let you guys know if I'm getting close to running out of it.

w0nderbr3ad
Posts: 120
Joined: Sun Mar 28, 2004 5:59 pm
Car: 1990 240sx with ka24de swap
Contact:

Re: (94_240sx)

Postby w0nderbr3ad » Fri May 29, 2009 7:11 pm

94_240sx wrote:
Yes, I have it.

Guys, I have plenty of them, so just pay $80 to sooky @ hotmail.com and I usually ship it next business day. You don't even have to email me and ask about it. I'll post here and let you guys know if I'm getting close to running out of it.
Just sent payment. Thanks

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: (w0nderbr3ad)

Postby 94_240sx » Fri May 29, 2009 7:13 pm

w0nderbr3ad wrote:
Just sent payment. Thanks
Got your payment and email sent.

User avatar
martins_240sx
Posts: 1414
Joined: Fri Oct 20, 2006 3:19 pm
Car: 1990 240sx hatch, 1975 280z, 2005 F150 fx4

Re: (94_240sx)

Postby martins_240sx » Thu Jun 04, 2009 12:49 pm

I just sent you 80 bucks via paypal. for a version 1if there is any problems email me at anthony.martin@New-Orleans.usmc.mil

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: (martins_240sx)

Postby 94_240sx » Thu Jun 04, 2009 1:27 pm

martins_240sx wrote:I just sent you 80 bucks via paypal. for a version 1if there is any problems email me at anthony.martin@New-Orleans.usmc.mil
Got your payment. It'll go out tomorrow and email you the tracking number.

w0nderbr3ad
Posts: 120
Joined: Sun Mar 28, 2004 5:59 pm
Car: 1990 240sx with ka24de swap
Contact:

Re: (94_240sx)

Postby w0nderbr3ad » Thu Jun 04, 2009 3:28 pm

Got it today. Thanks again. Looks solid.

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: (w0nderbr3ad)

Postby 94_240sx » Thu Jun 04, 2009 3:57 pm

w0nderbr3ad wrote:Got it today. Thanks again. Looks solid.
Cool, man.Thanks for the feedback.

User avatar
240daveTX
Posts: 231
Joined: Sat Oct 18, 2008 8:30 pm
Car: 1994 240 vert
Contact:

Re: (94_240sx)

Postby 240daveTX » Tue Jul 07, 2009 8:25 pm

can you email your location in TX.

if your close id like to come pick one up. possibly make one to support us s13 rb20 vehicles.

whitedragon0044 @ yahoo DAWT com

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: (240daveTX)

Postby 94_240sx » Fri Jul 10, 2009 5:55 pm

240daveTX wrote:can you email your location in TX.

if your close id like to come pick one up. possibly make one to support us s13 rb20 vehicles.

whitedragon0044 @ yahoo DAWT com
Email sent. Let me know.

User avatar
slim_240
Posts: 155
Joined: Thu Mar 19, 2009 7:03 pm

Re: (94_240sx)

Postby slim_240 » Sat Jul 11, 2009 11:02 pm

hey can we work out a deal if i come by and pick this up from you??

email me at mrwilliamquach@gmail.com. thanks!!

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: (slim_240)

Postby 94_240sx » Sun Jul 12, 2009 2:36 am

slim_240 wrote:hey can we work out a deal if i come by and pick this up from you??

email me at mrwilliamquach@gmail.com. thanks!!
$70 for pick up.

User avatar
phamlee
Posts: 1
Joined: Mon Sep 01, 2008 6:44 pm
Car: 240sx

Re: S13 Under Engine Cover/Skid Plate available for K ... (94_240sx)

Postby phamlee » Fri Jul 24, 2009 7:05 pm

email sent.

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: S13 Under Engine Cover/Skid Plate available for K ... (phamlee)

Postby 94_240sx » Sat Jul 25, 2009 1:04 am

phamlee wrote:email sent.
Replied, and it's $80 shipped.

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: S13 Under Engine Cover/Skid Plate available for K ... (94_240sx)

Postby 94_240sx » Thu Aug 13, 2009 5:42 am

I'm getting low on these panels, so order it while you can. This is it guys. I'm not going to make anymore, so once sold out, that's it. I usually ship it out same day or next morning.

kc77
Posts: 11
Joined: Fri Mar 16, 2007 3:43 am

Re: S13 Under Engine Cover/Skid Plate available for K ... (94_240sx)

Postby kc77 » Sun Sep 06, 2009 6:54 pm

do you still anymore of the V2 for greddy oil pan? please email me the availability and payment method.

thank you

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: S13 Under Engine Cover/Skid Plate available for K ... (kc77)

Postby 94_240sx » Mon Sep 07, 2009 12:59 am

kc77 wrote:do you still anymore of the V2 for greddy oil pan? please email me the availability and payment method.thank you
Sorry, V2 panels are all sold out.

kc77
Posts: 11
Joined: Fri Mar 16, 2007 3:43 am

Re: S13 Under Engine Cover/Skid Plate available for K ... (94_240sx)

Postby kc77 » Tue Sep 08, 2009 5:20 am

how thick is the skid plate? how much does it weight?

thx

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: S13 Under Engine Cover/Skid Plate available for K ... (kc77)

Postby 94_240sx » Tue Sep 08, 2009 5:56 am

kc77 wrote:how thick is the skid plate? how much does it weight?

thx
I'll check tonight and post here.

94_240sx
Posts: 7676
Joined: Mon Feb 28, 2005 5:56 am
Car: 94_240SX
Location: DFW, TX
Contact:

Re: S13 Under Engine Cover/Skid Plate available for K ... (kc77)

Postby 94_240sx » Tue Sep 08, 2009 4:06 pm

kc77 wrote:how thick is the skid plate? how much does it weight?

thx
5lb. and 2mm.



Return to “Fabricators' Market”

cron