Routs to take?????

[Sleeper415]

I got a little cash saved up and I just wanted to know what I could do with it. I really have been wanting to get something for my car to make it faster but I dont really know what rout to take???

SR20DET-t28-walbro fuel pump-3"exhaust-fmic

[IanS]

injectors, MAF and ECU retune

[theclub]

1 piece drive shaft, get more power to the wheels.

[hpmachine]

Give your money to me and I'll tell you what to do. kthanxby

[S13FASTBACKSR]

how long are you planning on keep that t28? some tomei poncams would be nice with it, most likely 256's. Cams will definately give you the most bang for the buck

[Sleeper415]

See thats what I was thinking CAMS becuase I think it will be cheaper then if I go with 555cc injectors.

I thought about injectors but thats going to lead me to the point where i have to get a Z32 MAF, boost controller, and i got to get my ECU retuned. It would be nice but dam, I just dont think im ready to go that far.

For the CAMS what would I need besides the CAMS, and where can I get some for a good price???

[S13FASTBACKSR]

injectors and maf are a stepping stone to make more power but they dont actually make more power. They are good for when you go with a bigger turbo. Bigger injectors allow more boost without leaning out which obviously makes for more power and the maf (z32 one) allows atleast 500whp where as the stock is about 280whp. And then yes you will have to get a rom-tune which is pricey. Cams are the best way to go. Tomei 256 poncams should make power all the way to 7krpm and are a perfect size for your t28. You'd absolutely love them ..search around for the cheapest prices.

[Sleeper415]

Thanks a lot man. Ill look around I appreciate it.

[Sleeper415]

I found this guy who want's to sale me Tomei 256 poncam's, greddy roller rockers and a z32 maf.

I need some help telling the 256 cams apart from the stock ones. I tryed to look for some kind of in graving on some picture's of the cam's like the HKS cam's have HKS on them but I couldn't see anything on the Tomei poncam's.

I just need to know what to look for and because he also had the cam's on his car. What else should I keep an eye out for to see if the cam's are not damaged????

[S13FASTBACKSR]

does the guy live in your town? if he does have him take you for a drive....cams will have marks on them but thats just because..that doesnt mean they are damaged..the way to tell if its an aftermarket cam is look at the lobes..if the lobe is higher and wider its aftermarket..dont buy Rocker Arm Stoppers..for you they would be pointless and a waste of money

[S13FASTBACKSR]

and if you buy the MAF ok but dont install it now because you also dont need it right now plus you'd have to get a retune and that costs even more money

[Sleeper415]

The cam's are pulled out of his car, so just buy the cam's off of him??

[S13FASTBACKSR]

ya you dont need the other stuff

[Sleeper415]

ok thanks sounds good. What would you say as to my next step after the cam's???

[S13FASTBACKSR]

gt2871r, 740cc injectors and an enthalpy tune