Roberts the Man - Check out the Switcher

Post by **jamesmost** » Sat Apr 08, 2006 4:49 am

Yeah, You dig it the most. The wire on the left side is power and plug from casette adaptor for my creative labs 60gig playerthe switch for ecu on right
Modified by jamesmost at 11:01 AM 4/8/2006

Post by **elwesso** » Sat Apr 08, 2006 4:53 am

so are those 2 little nubs on the top/botton to switch the program up and down?

Post by **Q_SHIP** » Sat Apr 08, 2006 4:54 am

Whats the other thing with the #2 on it?

Post by **elwesso** » Sat Apr 08, 2006 4:55 am

Q_SHIP wrote:Whats the other thing with the #2 on it?

thats the switcher, i thought?

Post by **jamesmost** » Sat Apr 08, 2006 4:56 am

elwesso wrote:so are those 2 little nubs on the top/botton to switch the program up and down?

yes up and down 8 programs only triedMad MaxValetDisable did not work-

Post by **jamesmost** » Sat Apr 08, 2006 4:57 am

Q_SHIP wrote:Whats the other thing with the #2 on it?

thats the switch wire runs to ECU

Post by **DrewQ45** » Sat Apr 08, 2006 5:04 am

Okay,

I think a is appropriate here. James, even with the explanation I'm not getting how that switch works. Maybe zoom out on the pic a bit?

...Drew....

Post by **QShip** » Sat Apr 08, 2006 5:15 am

What the heck am I looking at?

Post by **maxnix** » Sat Apr 08, 2006 5:18 am

QShip wrote:What the heck am I looking at?

Console cupholder with a bunch of left over somethings.

Post by **jamesmost** » Sat Apr 08, 2006 5:21 am

DrewQ45 wrote:Okay,

I think a is appropriate here. James, even with the explanation I'm not getting how that switch works. Maybe zoom out on the pic a bit?

...Drew....

magic switch

little nubs on top and bottom of number depress to switch up and downthis is the switcher for Robs NICO ECU aka "da bomb"the leftover somethings are the shavings from the dremmel cross cut bit i used to route out the hole for switch

Post by **Jesda** » Sat Apr 08, 2006 5:24 am

So this switches between programs on one ECU, or does it switch between two ECUs? I'd love to have a switch for winter (2nd gear) and summer (1st gear) TCUs.

Post by **jamesmost** » Sat Apr 08, 2006 5:27 am

Jesda wrote:So this switches between programs on one ECU, or does it switch between two ECUs? I'd love to have a switch for winter (2nd gear) and summer (1st gear) TCUs.

switches between the programs on the ECU - 8 programs

Post by **maxnix** » Sat Apr 08, 2006 5:34 am

So for what purpose is the cord? From where does it originate?

Post by **Q_SHIP** » Sat Apr 08, 2006 5:35 am

What is it, just a timing advance switch? Thats what the turbo buick guys do. They do it very cheap too!

Post by **elwesso** » Sat Apr 08, 2006 5:43 am

NO, this is the SWITCHABLE SETUP that Robert offers with the ECU!

You can get upto 8 programs, its like having 8 different ECU's..

You could have say this program seutp

1. Stock2. Stage 23. Stage 34. Valet (limits RPM to 3000 and speeds to 60MPH)

YOu switch between those 4 or however many you have.

This swtich goes back to the ECU...

Post by **Q_SHIP** » Sat Apr 08, 2006 5:47 am

Whats the reason for 3000 RPM and 60 mph limit? Is that for when your guides have not yet been done? LOL

What exactly is the difference between the selections?

Post by **CrimsonQ** » Sat Apr 08, 2006 5:48 am

yes Rob is the man!1 Heres mine about to go in this morning (3 program) I think James has a rotary switch? Im going to put my switch in the glovebox

Post by **Jesda** » Sat Apr 08, 2006 5:51 am

Q_SHIP wrote:Whats the reason for 3000 RPM and 60 mph limit? Is that for when your guides have not yet been done? LOL

What exactly is the difference between the selections?

In case some pinhead steals your car and attempts a high speed chase.

Post by **elwesso** » Sat Apr 08, 2006 5:51 am

Q_SHIP wrote:Whats the reason for 3000 RPM and 60 mph limit? Is that for when your guides have not yet been done? LOL

What exactly is the difference between the selections?

Its a valet program so that you can give your car to the valet guy and not have to worry about them hotrodding... I use this program to give it to repair shops in the rare occasion that happens, so they cant hotrod my car......

Stage 2 is our standard program, stage 3 is our maximum power program... Its all matter of timing advance.

Post by **CrimsonQ** » Sat Apr 08, 2006 6:58 am

First start-up with NICO ecu (sorry its unedited 18mb:() http://www.sdproducktions.biz/...u.MOV

Post by **jamesmost** » Sat Apr 08, 2006 7:11 am

maxnix wrote:So for what purpose is the cord? From where does it originate?

the cord on the left is power and mini plug for my creative labs 60 gig player (u know like an i-pod but mo better) power originates at fuse boxand the mini-plug origionates at casette deck.

Post by **elwesso** » Sat Apr 08, 2006 7:21 am

Thanks for posting..... did you ever take any videos of the car running, like redline?

Post by **CrimsonQ** » Sat Apr 08, 2006 7:23 am

If youre talking to me, then no havent done redline yet. I dont think the neighbors would like me much!!

Maybe I can get a shot at my buddys pad

Post by **elwesso** » Sat Apr 08, 2006 7:28 am

Id really like to hear a few vids of it revving, i kinda light that exhaust

Post by **jamesmost** » Sat Apr 08, 2006 7:28 am

CrimsonQ wrote:If youre talking to me, then no havent done redline yet. I dont think the neighbors would like me much!!

Maybe I can get a shot at my buddys pad

i am very nice to my neighbors but i still do burnouts on my block, they get used to it if u do it on other peoples blocks they call the cops

Post by **Q45denver** » Sat Apr 08, 2006 7:34 am

Were did you get the switch and/or what kind of mod was needed to Roberts switch?

Post by **RobertsnewQ** » Sat Apr 08, 2006 7:43 am

There have been a couple of different types of switches that I've used.

1. ECUs with two or three programs have a toggle2. ECUs with four or more had a rotary switch at first, now there's a rotary/pushbutton with a little numbered window.

If you have the old rotary switch and want to upgrade you'll have to send me your ECU. Sorry about the change but I found a cheap source for the nicer switches.

Post by **maxnix** » Sat Apr 08, 2006 11:55 am

How about an avi version?

Quicktime justs screws over my computer worse than regular gas in a Q.

Post by **Q45CALIBER** » Sat Apr 08, 2006 4:51 pm

Push button!!! Rob please make my 8 option push button.

Post by **Q451990** » Sat Apr 08, 2006 4:55 pm

Sounds a little like a lawn mower at first

Heath

CrimsonQ wrote:First start-up with NICO ecu (sorry its unedited 18mb:() http://www.sdproducktions.biz/...u.MOV

Roberts the Man - Check out the Switcher

Roberts the Man - Check out the Switcher

Re: Roberts the Man - Check out the Switcher (jamesmost)

Re: (Q_SHIP)

Re: Roberts the Man - Check out the Switcher (elwesso)

Re: (Q_SHIP)

Re: (jamesmost)

Re: (QShip)

Re: (DrewQ45)

Re: (Jesda)

Re: (jamesmost)

Re: (Q_SHIP)

Re: (maxnix)

Re: (Q_SHIP)

Re: (Q_SHIP)

Re: (elwesso)

Re: (maxnix)

Re: (CrimsonQ)

Re: (elwesso)

Re: (CrimsonQ)

Re: (CrimsonQ)

Re: Roberts the Man - Check out the Switcher (jamesmost)

Re: (CrimsonQ)

Re: (RobertsnewQ)

Re: (CrimsonQ)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums