RB25DET into 91 300ZX??

[GTR-33]

has anybody tried mating a z32 transmission internals, midsection and rear cover with an rb25 bell housing? Are the bolt pattern anywhere close as to try to mate them? I know some one doing a 91 gloria vg30det into an 88z and to make it a stick he used a z32 bell housing and a z31 internals midsection and rear cover with shifter.

The one thing that is NOT a challenge in this swap. The Z32 trans and the RWD RB are the same and all you have to do to bolt up a RB to one is swap the bellhousing.

[lyon23]

The one thing that is NOT a challenge in this swap. The Z32 trans and the RWD RB are the same and all you have to do to bolt up a RB to one is swap the bellhousing.

Thank you very much