alright rb20 owners... i am wondering if anyone has a longblock they could take some quick measurements for me. I would like to know the length of the block from the trans bellhousing to the motor mounts, and then from the mount to the front of the block.
also a picture of where the mount bolts to the block
just trying to see how similar it is to my l series engine
thanks
josh
rb20 measurements
-
hbpignosePA
- Posts: 3481
- Joined: Fri Dec 01, 2006 6:07 pm
- Car: 90 240sx hatch (Jackstand Queen)
78 Datsun 280Z (RIP)
89 Toyota Cressida (Sold)
86 Nissan 200SX hatch (sold)
83 Nissan 280ZX turbo (parts car)
90 Volvo 240 (sold)
80 Toyota Cressida MX32 (new daily) - Location: Amish Country Pa
-
TimTurboZ
- Posts: 663
- Joined: Mon Oct 06, 2008 8:59 pm
- Car: 95 S14 w/RBXX... 65' Mustang GT
- Location: Sacramento, CA
Re: rb20 measurements
I assume its for your 280Z...Talk to AZ/NissanGirl
project-z-finally-sees-daylight-t384167-80.html
I could possibly if I get a chance to
project-z-finally-sees-daylight-t384167-80.html
I could possibly if I get a chance to
-
hbpignosePA
- Posts: 3481
- Joined: Fri Dec 01, 2006 6:07 pm
- Car: 90 240sx hatch (Jackstand Queen)
78 Datsun 280Z (RIP)
89 Toyota Cressida (Sold)
86 Nissan 200SX hatch (sold)
83 Nissan 280ZX turbo (parts car)
90 Volvo 240 (sold)
80 Toyota Cressida MX32 (new daily) - Location: Amish Country Pa
Re: rb20 measurements
no i dont have a z.... i would bolt into a z
i want to put my l28et in my s13
i want to put my l28et in my s13
-
RustspecS13
- Posts: 928
- Joined: Sat Sep 08, 2007 5:30 pm
- Car: '74 260z and '88 300zx turbo
Re: rb20 measurements
Ive seen a few of those. I was tempted back when I had an L28et and an s13.
IIRC it bolts to the stock KA trans. Although I'd use an RB20 trans, with a ka bell housing that way the motor is a little further back and it bolts up.
Its been done before and its a tight squeeze for cooling stuffs. What more is there to know?
~Alex
IIRC it bolts to the stock KA trans. Although I'd use an RB20 trans, with a ka bell housing that way the motor is a little further back and it bolts up.
Its been done before and its a tight squeeze for cooling stuffs. What more is there to know?
~Alex
-
hbpignosePA
- Posts: 3481
- Joined: Fri Dec 01, 2006 6:07 pm
- Car: 90 240sx hatch (Jackstand Queen)
78 Datsun 280Z (RIP)
89 Toyota Cressida (Sold)
86 Nissan 200SX hatch (sold)
83 Nissan 280ZX turbo (parts car)
90 Volvo 240 (sold)
80 Toyota Cressida MX32 (new daily) - Location: Amish Country Pa
Re: rb20 measurements
only way i saw it donw was with a r32 crossmember.... ive been looking for a good year and cant find one.
so i want to see how similar the mounting locations are to the RB, so i can buy mounts instead of making custom ones
my one buddy has access to a machine shop with all the goodies to make custom stuff so its not a big deal but id like it to be as "bolt in" as possible.
im using a KA trans with an l28 bellowhousing swap
so i want to see how similar the mounting locations are to the RB, so i can buy mounts instead of making custom ones
my one buddy has access to a machine shop with all the goodies to make custom stuff so its not a big deal but id like it to be as "bolt in" as possible.
im using a KA trans with an l28 bellowhousing swap