Rb20 downpipe ?, and yes I searched!!

[Red93coupe]

Alright I'm going to using McKinney mounts for my s13, what downpipe and elbow should I be using? I searched and some people said you have to custom make one, and some people said buy the McKinney one, but $280 for just the downpipe? WOW! Any help and suggestions would be awesome!Also the power steering pump, I'm really confused on should I have someone make me some hydraulic lines for it? PICS would be really helpful!!

[onepuff]

For the power steering lines check here

zerothread/307781

or here

http://forums.racebread.com/index.php?topic=1568.0

For the downpipe. I used the one on this page. ssautocrap.

http://www.ssautochrome.com/level.itml/icOid/1531

It's made for RHD so i just had to cut it at the flange. Angle it a little towards the engine and reweld it back together. Then made a custom downpipe to the exhaust piping. Cost me about $150 all together. $50 elbow. $50 Tig weld elbow back together. About $50 for piping to make the downpipe. Used my dad's mig to do the downpipe so saved a little there. Working out great so far.RB20 S14 not sure how different it is from an s13 but it can't be too different. Also top hat mounts.

[corey_m_brock(BANNED)]

ive got a brand new AM-Performance screamer/downpipe custom made for the same setup. let me kmow if you still need one.

[race4fox]

I got a 3" DP for a SR, cut off the inlet flange, rotated and angeled it a little and then welded it back. No problems with it yet...