First off, what is the high pressure line? (for those who aren't familiar)
The high pressure power steering hose, connects your power steering pump to your PS rack, it also is the notorious weak link in the power steering system, over time the hose breaks down and leaks, resulting in the weekly PS reservoir refills. (If you've been there, it's not fun)

Well, help is on the way!
Fujii SPL is now offering you new replacement lines! These lines are stronger, will last longer and don't cost an arm and leg!

Alright the dirty details, Specs and Pictures:

The lines can be made to work with whatever engine you have including extra *90 bends less/more length etc.

Lines are rated at 5000PSI, double the rating of the other aftermarket lines! That's the running pressure, spike pressure is four times that amount!

Connect straight to your power steering rack without the need for that extra hard-line!

Shipping is $10 anywhere in the lower 48 and already included unless you mention otherwise! I can ship anywhere, just let me know where and I'll get a shipping quote.

Pricing is as follows:

SOHC $85 Shipped!
Straight from the pump to the rack on the other side! Deletes the sensor like the DOHC line does, very easy install right over the front of the engine and not down over the pulley like the stock line does.

DOHC-SR-RB-X Specify when Ordering please.
$75 Shipped!
Deletes the sensor and extra hard line and goes straight to the rack (the sensor increases your idle when at full steering lock, not a necessary sensor and most cars with engine swaps do not use it anyway)

PayPal is preferred so please add in an extra 3.0% on all orders when paying with PayPal. To set up different payment methods please e-mail me at danielbutton@live.com (that is also my PayPal account for payment)

Pictures:

Here are some pictures of the sensor delete line that goes straight to the rack!

HIGH PRESSURE POWER STEERING LINES FOR SALE

Sold for school money. Damn education.

Quote, originally posted by DJButton »

Man, you're the 3rd person to say! Guess I was a week too late in advertising. Be sure to pass it on if you hear of other people in need though, these are pretty inexpensive compared to most.

NEEEDDD.... nah, do i WANT it? yess... it actually helps make the car steer more responsive right?

Ummm if you're leaking now, having a fully filled PS system would make it steer better.

Are they ready to ship when I purchase one (like within the day or next)? I need one for a stock 92 hatch. Are those prices inc. shipping? If not, how much is S/H?

Quote, originally posted by ishkabibble »

Is the line heat resistant and can you make them for the B13 SE-R / NX?

Ish, I'd have to get a good idea as to what the SE-R/NX one looked like, and find out what size fittings to use etc, basically would need an OEM to replicate with our line. If you can get me one or the specs on the fittings, and length of it and some good pictures of the set-up, I'll be sure and give you a hefty discount on the first one we can come up with!

Quote, originally posted by FUNGC »

hey do you have any pics of the oringal like KA, SR, lines? plus the hard line pictures? cause my high pressure hose isn't leaking but my hardline to the rack is. soo i will just need that piece. also how much is shipping to ontario?

At this time all we are offering is the High Pressure line, sorry.

Quote, originally posted by 240_fun »

guess that the soaking wet hoses are an indication of a slight leak? lol

Right you are, time for a new one!

No one I know even runs the sensor and between SR's RB's and stock KA's none of us have ever had an issue, so you should be all set! The hardline loops over to the other side of the rack but the high pressure line just goes straight down to the forward hardline. If you do get one without the sensor then you'll want to remove that little hardline as our new lines go straight to the rack itself right below the steering shaft, I'll have pics up tomorrow of the new line too.

This guy is great to deal with. If you need PS lines, don't hesitate to order from him.

Thanks man. As soon as I get the new line on, Ill return the old sensor.

I'll send an email soon.

$65, shipping is free for now untill I get the prices set, so lucky you! Like I've told people, I've had my car on the road since August without the sensor, and honestly never noticed it was gone, I don't even know anyone who has the sensor still, so... basically it doesn't do a whole lot anyway!
I just got the line straight to the rack installed on mine tonight and it looks and works great if I do say so myself, I'll take some better pictures of it tomorrow!

I am in need of s13 KADE (s14 motor if that makes a difference), with the sensor delete.

Thanks.

Quote, originally posted by s13hybrid »

I am in need of s13 KADE (s14 motor if that makes a difference), with the sensor delete. Thanks.

I'll go check my e-mail again, but I can have one out to you in a couple days!