quarter times and mod lists

[burnin240sx]

crapy manual boost controler went to 17psi then droped to 10 psi. but 256 non the less.

[lucky7]

hey Nate (RBTally), is there any chance we could get a mod list. i am really curious to see what it takes to get nearly 600whp. thats amazing. thanks.

-Dane

[Sky240PWR]

crapy manual boost controler went to 17psi then droped to 10 psi. but 256 non the less.

thats weird, I got 250whp at 7psi, pretty much stock, besides exhaust and Greddy intake and fmic.

hey Nate (RBTally), is there any chance we could get a mod list. i am really curious to see what it takes to get nearly 600whp. thats amazing. thanks.

-Dane

yes please, mod list........600-650whp is my goal too!

[300Plus]

give him a little more time and wait to see what it runs on the track If I'm lucky his first run (since the new transmission) and my first run period in my s14 will be the same, so two RBs in one run.

[240slidekat]

crapy manual boost controler went to 17psi then droped to 10 psi. but 256 non the less.

is it just me but his a/f ratio is kinda on the lean side.

[RBTALLY]

fuel system

a1000 pump 1000cc injectros12 gal fuel cellremote fuel filteraerimotive fuel press regulator

haltech E6K computer now have FAST system67 mm turbosemi equal length ss manifoldliquid to air intercoller with ice tank in trunkspeck stage 5 clutch now in 300plus's carsheet metal intake70mm Edelbrock tbcrank triggermsd dis 4msd two tower coil packs greddy profect b spec 2 boost controller now have Inovative boost control3" exaust that exits under driver door no cat or muffler2.5" hot side and 3" cold side ic pipingthere may be more but that is all I can think of now

it was all bolt on stuff

it now has

tomie metal head gasket head studsFAST comupterinovative boost controllerexternal oil pump GM 2 speed powerglide transmition with transbrake and around 5000 rpm stall converterATI custom ballencer with crank trigger built in it

if I think of any thing else I will post it but that is most of it

[RB20DETodd]

Rb20, FMIC, rb25 turbine(is this even a mod?)

1.222----RT2.258-----60ft9.232----1/8et78.37----1/8mph14.156----1/4et99.76-----1/4mph

sorry to bring this back from the dead, no hateing on the 14

[300Plus]

Rb20, FMIC, rb25 turbine(is this even a mod?)

1.222----RT2.258-----60ft9.232----1/8et78.37----1/8mph14.156----1/4et99.76-----1/4mph

sorry to bring this back from the dead, no hateing on the 14

Ouch. You'll do better on your second trip to the track I'm sure

[RB20DETodd]

Ouch. You'll do better on your second trip to the track I'm sure

I wish, the only track on this island is closing at the end of this month for good, so ill have to wait till i get to seattle

[dsm007]

I wish, the only track on this island is closing at the end of this month for good, so ill have to wait till i get to seattle

Now thats enough too piss a man off,well a few......whats with this country and the recent trend of shutting down tracks?....we lost 4 last year here in florida.

[RB20DETodd]

Now thats enough too piss a man off,well a few......whats with this country and the recent trend of shutting down tracks?....we lost 4 last year here in florida.

werd, out here the land is too valueble so they will build "housing" you know the ones where every house is nice, looks the same and you can hear your neighbor fart and sometimes smell it

[300Plus]

Now thats enough too piss a man off,well a few......whats with this country and the recent trend of shutting down tracks?....we lost 4 last year here in florida.

+1 We had one up here in Tallahassee Years ago (before my time even) but they won't let them re-open it. We drive to Cecil GA about an hour and a half away.