Quarter mile times

[fast_s13]

i ran a 13.3 @ 111mph spinning throw the 1/8th

[89sr20coupe]

[email protected] 60'15psi

see sig for proof

[Emperor_Tha]

Best so far with the s14t28bb @15psi13.7@ 105mph60ft 2.21/8th 8.9 @ 83

Couldn't get a good launch with the new clutch and different street tires. Slightly bogging a little. Also at the end of the race I blew my 6 weeks old highflow metalcat. A loud bang then high pinging rattle noise, thought I blew a rod. Plus the track is super sticky. Car feels very slow. Feels like the car looses 30whp. But on the street it ripes through the gears fine.
Modified by Emperor_Tha at 4:55 PM 4/25/2009

[S14toRPS13]

Best so far with the s14t28bb @15psi13.7@ 105mph60ft 2.21/8th 8.9 @ 83

Modified by Emperor_Tha at 4:55 PM 4/25/2009

I admit that I hate it when I see people with stock turbos. Not that the turbo I used was a beast for 1/4 times. HKS GT2530 @ 13 or 14 psi.

13.495 @ 104.48 mph60ft 2.0371/8th 8.7 @ 82

[89sr20coupe]

I went 12.8@106 with my stock t25 on my bfg's

[DrifterProdigy85]

damn thats good. post up the slip to that. that had to been a 1.5 or 1.6 60ft.

[89sr20coupe]

it was only a 1.82 60'

[Emperor_Tha]

I went 12.8@106 with my stock t25 on my bfg's

More info on car, is the car strip?

[89sr20coupe]

all the mods in my sig minus the welded diff, t28 and turbo mani. 14 psi.

rear seats removed, battery in trunk

[2_Liter_Turbo]

Just ran an 11.95 @ 114 MPH with a 1.61 60 ft, lol

Can't wait to move on from the stock long block! I need cams bad!

[89sr20coupe]

nice run man. i am waiting on some bc 264's myself.

[DrifterProdigy85]

nice run man. i am waiting on some bc 264's myself.

Spend the money on some nice dialed in cams. Tomei, HKS, or JWT. I had the BC cams and they didnt put out any better numbers than my HKS 264 Step 1's did.

[2_Liter_Turbo]

Spend the money on some nice dialed in cams. Tomei, HKS, or JWT. I had the BC cams and they didnt put out any better numbers than my HKS 264 Step 1's did.

I agree

[89sr20coupe]

To late! They will be here tomorrow and I want my car back together. I will let you know what I think. I have been on stock cams for two years...they have got to be better than those.

[kentuckyslider]

11.87@116 is still my best pass with the old GT2871R setup. I haven't ran the Holset in the 1/4 but I've picked up 5mph in the 1/8th. I'm putting down about 70-80 more whp now so I should mph 122-125. If I can get a good 60' I might break 11.50?

[Emperor_Tha]

Your car is too fast.

what is your suspension and drivetrain setup?

Is it stripped downand caged?

[DrifterProdigy85]

To late! They will be here tomorrow and I want my car back together. I will let you know what I think. I have been on stock cams for two years...they have got to be better than those.

Did you upgrade your valvetrain also?

[89sr20coupe]

titanium springs and retainers from bc also. its almost back together now, been slacking on it.

[89sr20coupe]

rear seat removed, battery in trunk. tein springs and kyb struts.

[kentuckyslider]

Your car is too fast.

what is your suspension and drivetrain setup?

Is it stripped downand caged?

K sport springs with tokico blues in the front and oem struts in the rear. R32 Skyline 4.36 R&P with 26x8.5x15 MT slicks.

Full interior minus the back seat. Sunroof & power windows.

Sold the HX35(to laggy for me with the OEM housing) and installing a GT3076R .63 ar tomorrow and going to the track Saturday on 110 at 25psi. I will post my slip next week.

[kentuckyslider]

Driftprodigy has the fast car. When he gets his car tuned on E85 he will be making 10 sec passes in his sleep at 135+ mph.