Project 556Sx (No 56K)

[Ali 556]

Hi Guys,

finally gonna Start A Build Thread....Or Project 556Sx...Hance My SN Is Ali 556 I'll Name The Project With my "556" Mark..

The Car Is 95 S14 Cobalt Green bought it For ~3000K In Jun-'07 From Tx...The Car Was in a ok condition....then 1k miles the front main seal took a crap @ me on the highway....So I Replaced With A New One....

Any Pix :

When It's First Arrived : (thanks to SIM for the pix)Stock KADE And Auto <IMG NAME="icon" SRC="http://images.nicoclub.com/forums/image ... mao-vi.gif" BORDER="0"> Tint And New Tires (bridgston)

Then I Got EVO IX BBS Rims (17x8+35)

Then I've got EVO IX BREMBO Brakes Front And Rear (front are 320mm rotor and 4 piston caliper - Rear Are 296m rotor and 2 piston caliper)

Then I've made an adapter plate for the front brakes and installed the front brakes And Installed the rims With Hankook S1 EVo Tires (235-45/17)



Then i rocked the evo brakes for 2 months...after that got my Custom made hood and NAVAN bumber



finally bought some HKS Coilover And NAVAN Wing

Next week i'll install these parts :

1- SPL Soild Bushing.2- SPL Tension Rods.3- New 5-Lug Flanges.4- ES Steering Rack Bushing.5- ES Bushing Kit.6- Rear Evo Brakes (Caliper + Rotor).7- Replace the ENDLESS pads On the Front Calipers With Fredero DS-2500 Pads.

8- look for a turbo for KA-t Project....(0.50 Trim)

StayTuned For An Update...And Tell me guys what you think

Regards,

Ali

[Ali 556]

next week these monsters will go in :



Ali

[Crautz240]

Hmmm, usually not a fan of vented hoods, but yours really seems to flow, i like it!!!

[n240sxfnatic]

Did u get that hood made or whats the story, looks great

[zenkii]

Nice build, the hood seems to be pretty good for the turbo setup. Anyways good luck on the build!?! more pics

[Bumnah]

The Ferodo DS2500s are great brake pads. I've got 'em on my car as well.

[nousablenames133]

lol anyone else expecting a 5.56L or a 556ci swap? I can't think of any engines with those displacements, but i was hoping. then again it sounds like you want your car to turn.

[Ali 556]

lol anyone else expecting a 5.56L or a 556ci swap? I can't think of any engines with those displacements, but i was hoping. then again it sounds like you want your car to turn.

lol,

no i'm not doing a 5.56L swap....the name come from my SN Ali 556

Retard You?

ilA

[DMan II-40]

I like the wheels. Can't wait to see them with a drop.

[Bumnah]

are you runing some sort of parking brake?

Looking at the rear rotors, it looks like they have a drum e brake setup.

If so, what parking brake setup will you be using with these rear brakes?

[Razi]

No likey the hood.

I like the wheels though.

[alphapig]

+35 offset on the BBS?

Ew.

Wheel spacers plz.

[Dittoz7]

556sx?

Explain.

[TK_Encore]

556sx?

Explain.

umm lol i think he did.....twice

[Dittoz7]

LOL

Missed That...

[nousablenames133]

lol,

no i'm not doing a 5.56L swap....the name come from my SN Ali 556

Retard You?

ilA

yea, cause i can see the author name from the front page of 240sx.org, mr. loovers

[SR20DET.240]

Nice start, I want to see pics with the new suspension on.

[heartofaskyline]

hood = navan =

[Ali 556]

are you runing some sort of parking brake?

Looking at the rear rotors, it looks like they have a drum e brake setup.

If so, what parking brake setup will you be using with these rear brakes?

Ao i'm runnig Stock S14 rear disc brake + e-brake.....when i install the Evo rear i'll lose the e-brake...

And no i can't swap the e-brake from a Z b/c the inner diameter of the evo rotor is too small for Z rear brakes

About Offset...i'll get 5mm spacer front to clear coilover...for rear i'll rock the BBS until my RPF1's arrive.

Thanks To All

Ali

[7x13xRPS13]

Ao i'm runnig Stock S14 rear disc brake + e-brake.....when i install the Evo rear i'll lose the e-brake...

And no i can't swap the e-brake from a Z b/c the inner diameter of the evo rotor is too small for Z rear brakes

Ali

EVO e-brake line??

[eidk]

If you have any pictures of the adapter plate used to mount the evo brakes could you post them up please.

[Ali 556]

If you have any pictures of the adapter plate used to mount the evo brakes could you post them up please.

Will do,

I'll fab the Adapter plate next week if everything goes well,

EVO e-brake line??

NO,

I Have to delet/remove the E-brake...b/c i can't use it anymore....

Ali

[Ali 556]

ok it's time for update :

took the EVo rotor out



My Friend M Installing The ES Swaybar PY Bushing..(Holy BIG Caliper Batman !!!!)

Fabed New Adapter plate for the Front calipers

Took everything out and installed New 5-lug flanges and SPL Tension rodNew 5-lug flange installed

Now I'm Done With The driver side Flange and TC rod And FLCA Bushing....Next Install Pads And Reserves the EVO Rotor And move to the pass side..

Will update 2morow (i hope)

Ali

[brandonDavid]

looking good.

but your friend seems to be losing his hair.

[Ali 556]

Update :

Got my Ralliart TARMAC pads and reseerviceed(SP?) the front rotors and installed the pads,,, EVO pads Vs S14 Pads

Then took out my supframe to install SPL soild bushings :



That all i've done until now....2morow i'll fab brakets for rear evo caliper and install the rear caliper+rotor...

Stay tuned....

Ali

[Ali 556]

Ok,

Just Finshed installing every thing on the car :

SPL Soild bushing & TC Rods.Ralliart TRAMAC Pads (Front).EVO Ix Rotor + Caliper + Endless M-Sport Pads + Endless SS Lines (Rear).ES Bushing Kit.ES Steering Rack Bushing.New 5-Lug Flanges...

Any way pix :Old Stock Stuff :-------EVO IX Rotor + Caliper (Rear)

How The Car Sit Right now

Next Thing Is The Install Of HKS Coilover And Swap 5-Speed And Install The Skyline Diff.

Hope you guys like it....

Regards,

Ali

[RCA]

Awesome job Ali!I love where this car is going, plus your choices for mods are x7483

I am offically SUSCRIBED

PSHanging caliper?Not the best decision everhttp://i198.photobucket.com/al...47734

[Ali 556]

Awesome job Ali!I love where this car is going, plus your choices for mods are x7483

I am offically SUSCRIBED

PSHanging caliper?Not the best decision everhttp://i198.photobucket.com/al...47734

Thanks,

It was for few seconds then i let it rest on the spindel :





Your Car Is So Sexy too,

Ali

P.S

Do You E-brake work With Teh Willwoods...? I've Deleted mine...

[hazer396]

nice yob looks clean

[Ali 556]

OK,

Just Got my OEM EVO IX Brembo Front Rotors From My Friend With Less then 2K Miles On them....Also Got My '96 300Zx BMC

(Don't mind the box)



What I'm Going to do In The Next week - 2 weeks :

Install HKS Coilovers.Swap The Front Rotors.Install Z32 BMC.



Ali