Project 556Sx (No 56K)

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
User avatar
RCA
Posts: 8225
Joined: Mon Jan 22, 2007 8:09 am

Post

Ali 556 wrote:
Thanks,

It was for few seconds then i let it rest on the spindel :

http://i198.photobucket.com/al...33513



Your Car Is So Sexy too,

Ali

P.S

Do You E-brake work With Teh Willwoods...? I've Deleted mine...
Yea mine is gone with the wind...I am thinking about using an hydrolic "e-brake" and making it fit as if it was OEM...Its just a thought though

Those rotors look clean


User avatar
Ali 556
Posts: 566
Joined: Tue Mar 20, 2007 11:28 am
Car: '95 S14 Se....

Post

OK,

Smallish Update :

Installed My Z32 BMC And Bleed Teh Brakes And Swap Warpped Rotor With The Other rotors

(Crapy Phone Camera Pix (Nokia 6680)) :

Friend M Removing Old BMC

New Rotor ON And Wraped Rotor Aside (don't mind the rust)

Regards,

Ali


User avatar
ddgsxr504
Posts: 6024
Joined: Sat Jan 08, 2005 5:50 pm
Car: 1995 Nissan 240SX SE 2007 Infinit M35 Sport 2011 Nissan Pathfinder Silver Edition
Location: The real SoCal

Post

How does the ebrake work with those rear EVO Brembos on there?

.... just curious.

User avatar
ztommyx
Posts: 2315
Joined: Fri Oct 10, 2003 6:51 pm
Contact:

Post

i don't really dig the hood but nice nice work so far...


User avatar
RCA
Posts: 8225
Joined: Mon Jan 22, 2007 8:09 am

Post

What is that huge box next to you filled with?

User avatar
vocationalzero
Posts: 870
Joined: Thu Jan 24, 2008 9:44 pm
Car: 92 Too For Dee
87 BMW 635 CSi
06 Dodge Dakota Night Runner Edition
06 Nissan Sentra S
Location: Pfllugerville, Tx

Post

ddgsxr504 wrote:How does the ebrake work with those rear EVO Brembos on there?

.... just curious.
Been covered, he's not gonna have one.

User avatar
ANVIL
Posts: 1133
Joined: Sun Apr 08, 2007 11:36 am
Car: RB25DET S13.5
Location: Alaska

Post

very nice! u gotta hookup for evo parts or something??

what made u want such a massive break upgrade?

MastaYu
Posts: 12463
Joined: Wed Oct 03, 2007 3:49 am
Car: 92 Nissan 240SX SE HB

Post

nice brakes

User avatar
ddgsxr504
Posts: 6024
Joined: Sat Jan 08, 2005 5:50 pm
Car: 1995 Nissan 240SX SE 2007 Infinit M35 Sport 2011 Nissan Pathfinder Silver Edition
Location: The real SoCal

Post

vocationalzero wrote:Been covered, he's not gonna have one.
Oh well, so much for using those brakes.

mrgreeneyes
Posts: 2229
Joined: Wed Jan 11, 2006 6:15 pm
Car: ///M5
Parted Out Built S13 Coupe

Post

eh... ebrakes are for parking and underpowered drifting... then again, i never really liked cable ebrakes.

hydro ftw? fit near oem possibly? i may try it...

User avatar
Ali 556
Posts: 566
Joined: Tue Mar 20, 2007 11:28 am
Car: '95 S14 Se....

Post

rcabrita wrote:What is that huge box next to you filled with?
A/C compressor's....There Is 6 boxes Like That In here...



Ali

User avatar
Ali 556
Posts: 566
Joined: Tue Mar 20, 2007 11:28 am
Car: '95 S14 Se....

Post

UPDATE !!!

Toady My HAWK HPS Pads Alonge With The Coilover's Bearing's arrived . ...So Later this week i'll install My HKS Coilover.

Pix,



And The coilover bearings are from http://www.bakerprecision.com/

Ali

MastaYu
Posts: 12463
Joined: Wed Oct 03, 2007 3:49 am
Car: 92 Nissan 240SX SE HB

Post

nice pads

User avatar
charat
Posts: 291
Joined: Thu Dec 04, 2008 2:05 pm
Car: 1992 Nissan 240sx SE, 2008 Honda civic EX

Post

you're mexican arent you? the car looks like crap. sorry bro. but it does.

User avatar
ddgsxr504
Posts: 6024
Joined: Sat Jan 08, 2005 5:50 pm
Car: 1995 Nissan 240SX SE 2007 Infinit M35 Sport 2011 Nissan Pathfinder Silver Edition
Location: The real SoCal

Post

charat wrote:you're mexican arent you? the car looks like crap. sorry bro. but it does.
You aren't a tool are you? Let's see your f*ckin car troll.

User avatar
tramp_drift240
Posts: 4649
Joined: Mon Nov 20, 2006 2:43 pm
Car: 1992 240sx SE Coupe
Location: NoVA
Contact:

Post

charat wrote:you're mexican arent you? the car looks like crap. sorry bro. but it does.
LOL, what an a$$.

id like to see your car, if you have one.

MIND YOU, google searches, etc, are not allowable pictures to use as "your car"

User avatar
RCA
Posts: 8225
Joined: Mon Jan 22, 2007 8:09 am

Post

charat wrote:you're mexican arent you? the car looks like crap. sorry bro. but it does.
Says the guy with 3 posts

Ali's car is being built up. Hence a build thread. Even if it doesn't look good (which I don't think is the case) he isn't done yet.

But my question is why mention Mexico?

User avatar
ddgsxr504
Posts: 6024
Joined: Sat Jan 08, 2005 5:50 pm
Car: 1995 Nissan 240SX SE 2007 Infinit M35 Sport 2011 Nissan Pathfinder Silver Edition
Location: The real SoCal

Post

I've seen quite a few threads with posts from *** hats like him who say bump or even one guy who made 3 different posts about STOOOPID ish like "how to make my car 5 lug" ect.

I wish it was the wild west where you could still beat people legally.

SR24DET
Posts: 726
Joined: Sat May 19, 2007 6:41 pm
Car: RMS13

Post

Ive seen the evo brake swap done only once befor. I think its cool. I would go hydro with your ebrake. The other guy i saw do this connected his stock calipur in the back so there was 2 calipurs in the back on each rotor. Nice!

PS: I love the Hood. Everyone has there own thing and i think it looks nice.

User avatar
Ali 556
Posts: 566
Joined: Tue Mar 20, 2007 11:28 am
Car: '95 S14 Se....

Post

rcabrita wrote:Ali's car is being built up. Hence a build thread. Even if it doesn't look good (which I don't think is the case) he isn't done yet.
Thanks Dude,
SR24DET wrote:Ive seen the evo brake swap done only once befor. I think its cool. I would go hydro with your ebrake. The other guy i saw do this connected his stock calipur in the back so there was 2 calipurs in the back on each rotor. Nice!

PS: I love the Hood. Everyone has there own thing and i think it looks nice.
For now i care less about the E-brakes....Now my mind on installing them HKS's...

Then I'll rock the Brembos + HKS on the track....Then Around Feb '09 (if every thing goes well) it's time For 2JZ-GTE Swap....

Thanks guys,

Regards,

Ali

Edit :

fully assembled HKS's (New top bearings).






Modified by Ali 556 at 11:08 PM 12/18/2008

User avatar
Ali 556
Posts: 566
Joined: Tue Mar 20, 2007 11:28 am
Car: '95 S14 Se....

Post

smallish update :

installed HKS coilovers and OIL cooler to cool the KA (that wuy i'm covering the bumber)

Pix :











hope you guys like it

Ali

EfiniRX7
Posts: 428
Joined: Sat Feb 02, 2008 4:37 am
Car: 93 FD3S not going anywhere, 2003 E46 M3 traded, s14 sold, 2010 camaro sold, now another kouki s14, FD did go somewhere, Now a 535whp rotary Kouki s14

Post

Slam it

User avatar
xX RB Xx
Posts: 3719
Joined: Wed Jun 20, 2007 3:15 pm
Car: SE3P, FC3S, FC3C.
Location: Japan

Post

Ali 556 wrote:
The Car Is 95 S14 Cobalt Green
actually... the color of the car is emerald blue.. thats the color code because ive have had to paint that color before and i remember seeing it on the can.. and plus i owend a zenki the same color before...

but anyways.. sweet build dude.. keep up the good work.

User avatar
tEknoS13
Posts: 1665
Joined: Wed Jan 17, 2007 4:54 pm
Car: 93' Type X

Post

charat wrote:you're mexican arent you? the car looks like crap. sorry bro. but it does.
Wow I missed this, its pretty old isn't it? This crap is very offensive but I will not cry about it, at least not go down to his level. I happen to be Mexican and I guarantee my car is better than yours in every aspect.

OP sorry for the crap. BTW: did you get the rear calipers from someone in NICO? I sold a set to someone a few months ago.

TheFallOfJeffrey
Posts: 71
Joined: Mon Jan 12, 2009 5:06 am
Car: 1990 240SX

Post

Your cars looking pretty good man, I'm really diggin that hood! Def following this build. Keep it up bro

User avatar
vocationalzero
Posts: 870
Joined: Thu Jan 24, 2008 9:44 pm
Car: 92 Too For Dee
87 BMW 635 CSi
06 Dodge Dakota Night Runner Edition
06 Nissan Sentra S
Location: Pfllugerville, Tx

Post

ANVIL wrote:very nice! u gotta hookup for evo parts or something??

what made u want such a massive break upgrade?
Join evo forums and wait for people who are selling their old brake setups, or hover through ebay. You could probably get your hands on a set of rotors and calipers for the front for like 400 and probably 250-300 for the rears I would think... Same with the wheels You would just probably have to get the tires elsewhere.

User avatar
Ali 556
Posts: 566
Joined: Tue Mar 20, 2007 11:28 am
Car: '95 S14 Se....

Post

ok smallish update :

Fixed my front bumberDeleted the + in the middel of the bumber.deleted the stock winglowerd the rear HKS coilovers.

PIX,



Hope you guys like it,,,,

Ali

User avatar
Ghast
Posts: 1221
Joined: Tue Nov 06, 2007 5:05 am
Car: 1993 240sx, 2002 Lancer ES, 2006 350z Enthusiast

Post

Lookin good bro. Keep up the good work.

One Love,

Ghasty

User avatar
pejsa s-13
Posts: 529
Joined: Thu Sep 18, 2008 8:41 pm
Car: 91 HardBody, 85 720

Post

looks like you need a new muffler

i like it alot, except for those chrome things in between your headlights

User avatar
breadbox
Posts: 8549
Joined: Tue Oct 17, 2006 4:09 pm
Car: 89 Nissan 240SX
89 Koop
84 720 4x4KC
Location: Va Bch

Post

nice. maybe find some fogs that fit there better and different exhaust.


Return to “240sx General Discussion”