people with HKS actuators...I need your help!

[pearlS13]

Anyone here running an adjustable HKS actuator on their sr's?If so, I need the measurement from the begining of the threads on the rod to the begining of the locking nut (looking at it installed on the motor left to right)...and specify what boost your running aswell.Also, do these units come set at a minimum of say 10psi or can they go down to 7psi like stock?

Thanks.

[IanS]

if you turn it all the way down it will run about 7 PSI, if you need to adjust it, just start with it fully extended, and start turning, go about 2 turns, and go test drive the car, dont worry about putting the E clip on until youve reached desired boost

from the begining of the threads to the locking nut there is 3/4 of an inch, and I am running about 9-10 PSI