My engine runs at 4.1 KG/CM^2 which is around 56PSI
Is that really low?
I was thinking 80 psi was what oil systems ran at?
The det and DE are pretty close to each other so I was wondering what you DET people have on yours?
thanks
Oil pressure question? Sr20de and DET
-
9240sx
- Posts: 2676
- Joined: Wed Dec 10, 2003 4:06 am
- Car: What i believe to be the cleanest s13 in the world.
SR20DET + RS*R-Apexi-Nismo-Trust-HKS= 100% pure love - Location: New Mexico
Re: Oil pressure question? Sr20de and DET (uvamosk)
It matters if the car is cold,What rpms the engine is at,Things like that..
At idle speed fully warmed up im getting 13-15psi.Cold starts around 90psi for a few seconds.
At idle speed fully warmed up im getting 13-15psi.Cold starts around 90psi for a few seconds.
-
IanS
- Posts: 9758
- Joined: Thu Dec 23, 2004 3:07 pm
- Car: 2002 Subaru WRX, 2010 Subaru Forester XT, 2004 Infiniti G35 Coupe.
- Location: Esko, MN
- Contact:
Re: (jr_ss)
mine too, except I dont drive the car until I can excelerate without going above 80psijr_ss wrote:At idle I'm running 19-21psi. Cold start up under accel at around 3k rpms I'm at 90psi or higher. Cruising around in 5th at 50mph I'm around 40-50psi.
Re: (SideWays=smiles)
You can drive the car, I just don't beat on mine until the temp is up at operating temps...SideWays=smiles wrote:
mine too, except I dont drive the car until I can excelerate without going above 80psi