newb to the forum 6" lip on s13

[ka24det s13]

does any body know if its possible?

if so what will be needed?

what dimension wheels and tires do u recomend?

how low will i be able to drop it?
Modified by ka24det s13 at 5:40 PM 7/13/2008

[shimizu_17]

does any body know if its possible?

if so what will be needed?

what dimension wheels and tires do u recomend?

how low will i be able to drop it?

Modified by ka24det s13 at 5:40 PM 7/13/2008

1. Try and post in the wheel and tire tech forum. (if a mod could move this that would be coo)2. Your question has a lot of variables. Tell is what wheel brands you want, offset, what suspension you have, what size tires you would like to run, do you have widebody fenders? stock body? stock body with fenders rolled?

[ka24det s13]

well i have no clue as to what offset i need but i fas thinking of having the rear stretched out a few inches on eac side. by the way how do you put a pic for your signature?

[IanS]

Your question doesn't really make much sense.

You need to decide what wheels and tires you want, and decide what suspension you want, then worry about the bodywork, that way you have an idea what you are working with.

Do some research, look at pictures, find out whats been done, and what you think looks good. Form a plan, know your goals, and build a car worth calling your own.

/Ninja edit..
Modified by FlatBlackIan at 8:13 PM 7/13/2008

[jeking1]

flatblackian, he is talking about the lip on a rim, but I could see why you thought he was talking about a lip on a bumper. as for the question at hand, I think a 6 inch lip is pushing it, possible for sure, widebody kit, flared if needed, and the right offset, but alot of modification would be needed in the end.

[ka24det s13]

yea dude. its cool though, we all tend to read too fast sometimes but i guess i would like to put 20x11s on the back if they have them anyways lol... with 19x8s onthe front with a 3inch lip with a little meat on the tire, to many rough roads in la. im nat sure what the offset would have to be. hella staggered for sure. but when i drop it i would love for it to tuck just covering the tires.

[IanS]

i would like to put 20x11s on the back if they have them anyways lol...

On an S13?

Why? Its not a Dodge Magnum, put down the Dub magazine. Unless you plan on going VIP, then Drop it like its hot.

[heartofaskyline]

is this enough lip?

oh and your a moron for those wheel sizes

[TRBOMOFO]

yea dude. its cool though, we all tend to read too fast sometimes but i guess i would like to put 20x11s on the back if they have them anyways lol... with 19x8s onthe front with a 3inch lip with a little meat on the tire, to many rough roads in la. im nat sure what the offset would have to be. hella staggered for sure. but when i drop it i would love for it to tuck just covering the tires.

anythings possible with the money

but for your requests you might want to go to DUB mag or somethings

i got 17X10 in the rear and i rub like a mad and have like a 2 inch drop

for 20X11 ???? hahahahah you will need to remove most of the rear quarter panel / wide flare with a kit or something

and i dunno about the offset on the wheels

DO YOU EVEN HAVE WHEELS PICKED OUT????

i need to see this

[TRBOMOFO]

well thank you heartofaskyline

i need a visual

damn

[hpmachine]

This is either a joke or he just turned 15

[ILoveMyRHS13]

Let me fill you in; run these sizes and you'll be ****ing golden.

Front:18x12 -35

Rear:19x15 -40

[audtatious]

This is either a joke or he just turned 15

You won't see him post again. He was run out of KA-T for being a knowitall and this is another account before the hammer fell harder.

[RCA]

^Um probably 15 yrs old.

6 Inch lip on a rim that's wider then 9' on an S13 is going to be a totally custom job.For a 3 inch "rear lip" with 20x11 rims on an S13 then you are looking at 50mm over rear fenders, an offset of +63 and you are going to need a nice set of coilovers to lower your S13 because 20' wheels will look funny.I would stick with 17's and 18's if you want to go crazy.

Also look into some aero for the car. Like side skirts and rear bumper and front lip...The added height of you car will make it look retarted.

[Kckouki]

Theres some guy on zilvia that wants to trade his SSR's or works can remember, but there like 19x11 - 69 or somthing. lmao

[jdm180sxdk]

I got 20x11's on the rear of my 180sx

[nevertheless]

Cool Bro! Post sem Picz!

[poshatch]

ok this is an easy answer

step 1: convert the lip size you want into mm (6")x25.4 = 152.4mm

thats the outter measurment you want from your wheel

now a zero offset on that would be a 12" wide wheel

now that is a huge wheel, but you can always go negative offset so for every 1 inch that you take off the 12" width you need to make the offset a -25.4mm

good luck finding that beastly wheel

[jdm180sxdk]

http://img707.imageshack.us/im...v.jpg

http://img709.imageshack.us/img709/449/1000415.jpg

http://img706.imageshack.us/im...q.jpg

[simmode1]

Year and a half old thread... But nice pics above. Should have done an introduction thread, instead.

[Dire91]

Back from the grave, but holy lippage! Those works are sick what's the offset!?

[240life]

Ryan Tuerk of Drift Alliance is rocking a set in black on his street car in this video off seasons ...this car is sweet in person