New wheels

[BusyBadger]

Even though I drive my Z year round, even across an 4000 foot pass in the mountains that routinely sees snow in winter, I'd store mine too in the winters of Chitown. Can you believe the three years I lived there before I moved to TN I daily drove my S13?

So...what's the winter Kuhan-Mobile?

[kuhan]

Company work van ftw

Just had the Z dyno'd today with just a Nismo catback exhaust and made 255 whp and 230 lb torque on Mustang Dynamometer. Running a little rich right now. Will get an Uprev tune after CAI, HFCs and possibly HKS HI power exhaust.

[dasoupdude]

Just had the Z dyno'd today with just a Nismo catback exhaust and made 255 whp and 230 lb torque on Mustang Dynamometer.

Ah. The mustang dyno, aka the heartbreaker.

After realizing you have an HR with all those mods i don't even want to know what EYE would put down.

[kuhan]

^I'm happy if I can make 270-280 whp after these mods + Uprev Osris tune

[BusyBadger]

Supercharging sounds better and better to me all the time. *sigh*

[dasoupdude]

i hate this kid

my-rb26-powered-350z-t465441.html

[kuhan]

A friend with an 08 350Z has recently gone FI with Greddy Twin Turbo Kit on stock internals. He is currently running about 6.5 lbs of boost and made 374 whp. I'll check out this TT Z tomorrow.

Now GTM has come out with Supercharget Kit for 350Z HR as well.

Very tempting

[kuhan]

Lastest addition to the Z. 6pot/4pot

[BusyBadger]

Lastest addition to the Z. 6pot/4pot

Oooh...Endless.

.

You have to make any changes with the plumbing or master cylinder?

[dasoupdude]

Damn, i don't know anybody with endless brakes. How much did those go for

[kuhan]

You have to make any changes with the plumbing or master cylinder?

These came off 04 G35, and I believe it used oem master cylinder.

Soup,

3g's for the kit.


I also have to order new front and rear pads. I need to get the rotor hats powder coated or painted as well.

The kit won't be installed until next spring since the Z will be garaged very soon. Winter FTL!

[boardjnky44]

+1 for dope

[Tunism0]

New wheels and tires

19" Advan RS dark gunmetal in Toyo T1R tires

255/35/19 F285/35/19 R

Awesome Z man I've actually been looking into the advan RS wheels for about a week now. Except I want mine in bronze because my Z is black.. I must say man, you've got one of the BEST looking Z's I've seen thus far. Keep up the good work!!

[kuhan]

+1 for dope

Thanks, man.

Awesome Z man I've actually been looking into the advan RS wheels for about a week now. Except I want mine in bronze because my Z is black.. I must say man, you've got one of the BEST looking Z's I've seen thus far. Keep up the good work!!

Thanks for the compliment. I love these RS wheels. They are pretty light wheels being 19's. As far I know RS comes in gold, silver and dark gunmetal. If you want bronze, then get Advan RZ. Or get a set of used RS and powder coat them to bronze.
Unless you can get used ones, these will cost you about $2500-3000 new.

And Welcome aboard!

[Tunism0]

+1 for dope

Thanks, man.

Awesome Z man I've actually been looking into the advan RS wheels for about a week now. Except I want mine in bronze because my Z is black.. I must say man, you've got one of the BEST looking Z's I've seen thus far. Keep up the good work!!

Thanks for the compliment. I love these RS wheels. They are pretty light wheels being 19's. As far I know RS comes in gold, silver and dark gunmetal. If you want bronze, then get Advan RZ. Or get a set of used RS and powder coat them to bronze.
Unless you can get used ones, these will cost you about $2500-3000 new.

And Welcome aboard!

Thanks Man! Oh yeah and are you on ******.com as well?? I think I MAY have seen your name up there before.. but not sure... But if you are, Add me on your buddy list!! Mine is Tunismo

[kuhan]

^Yes, it's me on that site with the same name.
-------------

Finally, life is ENDLESS!!!

Adios to tiny oem calipers and say hola to....

Endless 6pot/4pot setup.

Snapped a few quick shots. A proper photoshoot will come soon.

[BusyBadger]

Very very nice! Looks like you decided not to sell them.

So, is your car "too pretty to drive" (like really drive) or are you going to join us down at the Tail of the Dragon this year?

[dasoupdude]

Your Z demands a roadcourse ASAP.

btw, moar pics of that black 350 with the apr wing?

[hitbychance]

^Yes, it's me on that site with the same name.
-------------

Finally, life is ENDLESS!!!

Adios to tiny oem calipers and say hola to....

Endless 6pot/4pot setup.

Snapped a few quick shots. A proper photoshoot will come soon.

i have a boner.

[kuhan]

Thanks guys. Will eventually involve some sort of tracking when I get new front rotors.
I always wanted to take the Z down to Tail of the dragon. One of these days, I will.

And I don't have have more pics of the black Z. It's a really nice one as well. It's owned by one of the shop owners.

[BusyBadger]

Sweet! You try and make it down this September. Just got a new Thai restaurant five minutes from my house, the phở is actually decent (guess I can't complain, who knew you actually get phở in Tenenssee anyway!).

[kuhan]

Oh yes, I love Thai food. I'm Viet, so we usually eat homemade phở every other week.
I'll shoot you pm when we head down to Key West for vacation by end of May or so.

[kuhan]

Quick update. I picked up a set of Bilstein Pss10 coilovers recently.

I just had the shop installed the coilovers today along with installing SPC rear camber kit and got the rear fender rolled. (No pictures the install yet).




Here are a few recent pictures before the drop with brand new HKS hi power exhaust installed. :

[dasoupdude]

Bilstein Pss10 coilovers

I swear, you always attain every part that I want.