New H-Beam Rods on eBay.. Anyone seen them?

Post by **eazye2000** » Sun Feb 17, 2008 9:30 pm

PerfectCrank wrote:You also can upgrade to ARP2000 or L19 bolts. .

It's an extra 60$, but to each his own.

And yes, 'weaker' of the ARP bolts. Yet, 10x better than stocker rod bolts..

YouTube · Post by **DeXteR** » Mon Feb 18, 2008 4:58 am

I just sent the guy a message on Friday asking about when he's expecting to have more KA rods. He told me 4-6 weeks which is better than 4-8.

Post by **Florida240sx** » Mon Feb 18, 2008 12:31 pm

DeXteR wrote:I just sent the guy a message on Friday asking about when he's expecting to have more KA rods. He told me 4-6 weeks which is better than 4-8.

rotflmao look at the time i posted that

Post by **got chub** » Wed Feb 20, 2008 7:39 pm

im new to the whole kat thing but im planing on going kat real soon so when i see this guy has the rods im going to get some to

YouTube · Post by **DeXteR** » Thu Feb 21, 2008 4:14 am

Florida240sx wrote:rotflmao look at the time i posted that

I know, it was almost 2 weeks ago...

I meant it's better than hearing 4-8 weeks again. you > < me

YouTube · Post by **DeXteR** » Thu Mar 06, 2008 8:07 am

I bugged them again today. I told them to come offer a group buy on Nico because they'll give a quantity discount according to their other rods listings on ebay. Anyway, here's the reply:

[quote=""CrankShaft Depot eStore""]It is temporary out of stock, we hope will restock in 2 weeks.[/quote]I'm going to start bugging them every day in about 10 days...

Post by **eazye2000** » Thu Mar 06, 2008 4:14 pm

Sounds like a plan. If we can get them shipped for like 200$, I'm game. But you'll have to head this up with one of the moderators for an official group buy with legal stuff's or something..

WD can probably help out with that part of it.

Post by **WDRacing** » Thu Mar 06, 2008 4:49 pm

Once they get them in, I'll work the GB angle for us.

Post by **eazye2000** » Thu Mar 06, 2008 4:54 pm

^

I will be your fluffer... long time...

Post by **got chub** » Thu Mar 06, 2008 8:56 pm

keep us up dated on the group buy thing. I'm game for it when they get more in.

Post by **eazye2000** » Thu Mar 06, 2008 9:17 pm

Yeah man! It's either build a budget KA-T, or go with the SR that's laying around at my buddy's house..... ughI really don't have money for either motor build-up. But buying a part that is engine specific would really make my mind up.. hah

...sorry to bump it...again

YouTube · Post by **DeXteR** » Fri Mar 07, 2008 5:10 am

Yes, I would 100% be in on a Nico GB for these. Money is waiting in the bank...

Post by **s14 kouki2** » Fri Mar 14, 2008 6:24 pm

DeXteR wrote:Yes, I would 100% be in on a Nico GB for these. Money is waiting in the bank...

LMK Im down as well Im actually already ka-t but now im building the whole mototr and i wanted to try these if theres a group buy lmk ill be checkin anyway but if its last minute my e-mail is [email protected]

YouTube · Post by **DeXteR** » Mon Mar 17, 2008 4:09 am

Any news on a GB? These should be available this week sometime or early next week. I'm getting these one way or another.

Post by **72nismo** » Mon Mar 17, 2008 4:52 am

Im in for a group buy.

YouTube · Post by **DeXteR** » Mon Mar 17, 2008 4:52 am

I sent them an email today asking when they were expecting delivery, how many they were going to have, and to let them know that we might have a group buy... this was the reply:

crankshaftdepot wrote:Sorry our supplier have not fed us yet.

You no speak Engrish good?

Post by **s14 kouki2** » Mon Mar 17, 2008 12:53 pm

DeXteR wrote:I sent them an email today asking when they were expecting delivery, how many they were going to have, and to let them know that we might have a group buy... this was the reply:

You no speak Engrish good?

Post by **WDRacing** » Tue Mar 18, 2008 4:25 am

I suggest if you guys want to do a GB, that you organize it via IM or email. I don't see us supporting these guys. They are unreliable with communication and it goes against policy to allow a group buy from a non sponsor.

They aren't a US based seller either. Buyer beware IMO.

This doesn't get my seal of approval. If they are that cheap, I'd buy them without the GB hassle. I'm admittedly an untrusting person when it comes to this type of thing.

WD

YouTube · Post by **DeXteR** » Tue Mar 18, 2008 6:02 am

WDRacing wrote:Once they get them in, I'll work the GB angle for us.

Changed your mind or got a "no" from the higher ups?

I'm not going to take responsibility for organizing a group buy and have had my fair share of hassles with non-Nico-endorsed group buys.

Oh well.

I'll report back after I get a set - unless I can find some used Eagles...

Post by **WDRacing** » Tue Mar 18, 2008 7:34 am

The GB policy has recently been changed and the rules are strict. But it's to keep our members safe. This particular bizz doesn't give me a warm fuzzy, so I hesitate to tell others they are good to go when I myself question them.

If you aren't versed in the English language and aren't taking the time to answer questions etc to the best of your ability...well that alone speaks volumes IMO.

WD

Post by **Florida240sx** » Tue Mar 18, 2008 7:01 pm

I can get eagles at a good price. Being he doesn't know when they will arrive means he doesn't know if they are even right for us. Eagles are my buy now. Don't feel like going through another engine.

Post by **72nismo** » Wed Mar 19, 2008 5:09 am

How much for the eagle rods??

Post by **got chub** » Wed Mar 19, 2008 6:12 am

72nismo wrote:How much for the eagle rods??

read over the previous post and you'll get you answer

Post by **importdude** » Sun Mar 23, 2008 10:45 pm

im thinking of geting a set !!! these seem to be really good

Post by **underground** » Mon Mar 24, 2008 10:51 am

Mods- Feel free to delete if this violates rules or what not..

We already sell full rebuild kits with Eagle Rods without any problems but these are a little cheaper and I wouldn't mind heading up a GB if ya'll are interested as I can always keep a few on the shelf if we don't get the 5 or 10 people that this guy is wanting. Anyways if this interest some of you feel free to email or send us a message on AIMMMm.. [email protected] or undergroundmspts

I'm just bouncing the idea around so let me know if this is of interest.

Post by **Charlie240sxt** » Tue Mar 25, 2008 10:57 am

I'd be down with a GB from theses guys.

I would like some info on the supertech pistons tho??

Post by **underground** » Tue Mar 25, 2008 12:28 pm

Send me an email or IM.. look at my previous posts for my username and email address.. anyone else?

Post by **Turbo 510** » Mon Mar 31, 2008 5:26 pm

Get the K1 rods from AMS. They are a sub brand of Carrillo (forged overseas and finished in the USA, according to the Carrillo guy at SEMA) and they are cheap at $395/set. I have used them in my KADET without fail for several years.

Post by **redhb240SXS13** » Tue Apr 01, 2008 3:13 am

Underground- Are you doing a GB on the Eagle Rods or the entire rebuild kit? If it's for the entire kit I'm in for sure.

Post by **eazye2000** » Wed Apr 02, 2008 2:42 pm

Turbo 510 wrote:Get the K1 rods from AMS.

Well, I can't complain. I have the same rods in my KA, and I've beat the crap out of my car. (26psi on a GT2860RS)

But I'd still like to give these rods a try if we can get them at 200 bux a set.

New H-Beam Rods on eBay.. Anyone seen them?

Re: (sunnys14)

Re: (eazye2000)

Re: (DeXteR)

Re: (Florida240sx)

Re: (Florida240sx)

Re: (DeXteR)

Re: (DeXteR)

Re: (eazye2000)

Re: (WDRacing)

Re: (WDRacing)

Re: (got_chub)

Re: (eazye2000)

Re: (DeXteR)

Re: (s14 kouki2)

Re: (eazye2000)

Re: (DeXteR)

Re: (s14 kouki2)

Re: (WDRacing)

Re: (DeXteR)

Re: (Florida240sx)

Re: (72nismo)

Re: (importdude)

Re: (underground)

Re: (Charlie240sxt)

Re: (underground)

Re: (Turbo 510)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums