Need some help finding a part

[donut86]

there are NO 240's in ANY junkyards in my area...I need help from the people on here that can snag me a part from one. I need the banjo that bolts to the power steering pump and the bolt that mounts the pressure line to that banjo. its the entire assembly in the right hand side of the pic below. let me know how much you are asking for it shipped to 63129. thanks in advance.

[justclay]

You need just the bolt or the whole assembly?

[donut86]

I need the whole thing in the pic

[biggie]

Check car-part.com and search around and call to see about someone shipping you the part.

Otherwise after you get 10 posts post it here as well:zeroforum?id=202

Would look through the part outs as well:zeroforum?id=230

[cmkelly]

If you're trying to fix a leaky power steering problem there are other ways to do it. I removed that whole assembly when I changed high pressure PS lines. There's a guy on NICO's forum that sells a solution.

If that's not your problem good luck on your quest.

[donut86]

Im just trying to get the car running. it hasnt ran in over 2 years because the motor was beyond gone. the reason Im going the stock route is because Ive been unemployed for 6 months and trying to save a little money. I was just seeing if anyone had a 240 in a junkyard to grab one because its killing me to see the car and not be able to drive it.

[wmdavis007]

If you can't find the part you can order the new lines from a fabricator here on NICO like cmkelly said...here is the link: zerothread/307781 Only $75 and $10 for shipping...can't beat that. Hope you get her fixed.

[donut86]

a guy I know in a junkyard about 2 hours away is shipping these to me tomorrow...for free too! now just to get my alternator to actually charge LOL

thanks to all though, Im sure Ill get better lines when I have an income (hopefully soon)