need quick help with vacuum lines

[Elemental]

ok here is what I have:

electronic boost controllerboost gauge

can someone please tell me where to line to what and with a t or what? I think I have this routed incorrectly.

here is what I need to connect:electronic boost controller- 2 nippleswastegate actuatorblowoff valvefuel pressure regulator2 nipples on the intake manifoldone nipple on electronic boost gauge sending unit

help is appreciated! thanks!

[vutony]

wat boost controller is it

[Elemental]

its an apexi avcr boost controller.

if you think of the boost controller as a clock:

12 oclock is wiring3 oclock is blank6 oclock has a nipple9 oclock has a nipple

[IanS]

alrighty,

left nipple on intake gets teed and goes to fpr and ebc sending unit

right nipple on intake goes to bov

there should be a nipple on your hot pipe just after your turbo, this goes in one side of the boost controler and out the other side to the wastegate actuator, I dont know which is which on the AVCR though

hope this helped.