need help with my ca18det plz

[towyld2taim]

ok so i picked up a s13 with a ca18det in it and after looking at it i noticed some vacum lines that didnt look right can anybody get me a vacum diagram iv tried searching but couldnt find what i needed

[towyld2taim]

really nobody knows anything

[Dmafioso13]

are you going to run all the emissions parts as well as the misc solenoids that are unnecessary? When I completed my CA swap many years ago I only ended up with a few lines. Most of them can be removed, I believe as long as you have one to the Fuel Pressure regulator, Idle air Control, BOV if you have one, and a boost gauge if you have one as well.

[towyld2taim]

well i dont plan on running emmisions cuz i dont need to and i dont have a bov yet the boost gauge has one but theres kinda a small one behind the engine that is just cut and a screw is stuffed in it and ok thanks for that info i guess ill go look and see what i come up with if you think of anything else plz let me know

[ca18detgabby]

a picture of what you are talking about will be real easy to tell you what it is.

[towyld2taim]

i dont know how to upload images to here so here a link if you have a quetion or need more pics to figure it out let me know http://s585.photobucket.com/al...est=1

[Slow_S12]

that line with the screw in it goes to the intake tube then into that hard line, then it goes to one of the evap canister lines. so, you dont really need.

zerothread/225309 check that for proper vacuum routing info.