Hey guys, i am trying to get my car running, and I have a wiring harness on the way now. Got all my parts, but I am tring to get some information on how to wiring the euro harness with the JDM engine, in the USDM spec car.
Have searched, but nothing useful.
Thanks.
Need help with Euro wiring on JDM engine.
-
boost_boy
- Posts: 7051
- Joined: Thu Nov 14, 2002 7:28 am
- Car: B12 sentra w/built CA18DET, B12 sentra w/fully-built CA18DET, S13 coupe w/ CA18DET, S13 hatch w/CA18DET, 2002 maxima SE
- Location: Miami, FL.
- Contact:
Re: Need help with Euro wiring on JDM engine. (Robert90sx)
When you get the harness, then this post will become valid. It's very hard to help you if you don't have a pic or know what's missing off the harness (if anything) to make it compatible with the JDM ECU. As soon as you get the harness, revive this post and someone will assist you.Robert90sx wrote:Hey guys, i am trying to get my car running, and I have a wiring harness on the way now. Got all my parts, but I am tring to get some information on how to wiring the euro harness with the JDM engine, in the USDM spec car.
Have searched, but nothing useful.
Thanks.
Dee
-
themadscientist
- Posts: 26254
- Joined: Tue Nov 12, 2002 3:30 pm
- Car: R32 GTR, DR30 RS Turbo, BRZ, Lunchbox, NSR50 Sportster 883 Iron
- Location: Staring down at you with disdain from the spooky mountaintop castle.
Re: Need help with Euro wiring on JDM engine. (Robert90sx)
should be the same.
-
ragenasian
- Posts: 981
- Joined: Wed Feb 16, 2005 6:09 am
- Car: AE86 w/CA18DET
Re: Need help with Euro wiring on JDM engine. (themadscientist)
Two different euro harnesses. 89-90 has ignitor plugs, and the 91-94 does not have the ignitor plugs.
After a quick search I think this is what you need. If you get lucky you will have ignitor plugs if not here is the wiring of one with no plugs.
zerothread?id=168246
After a quick search I think this is what you need. If you get lucky you will have ignitor plugs if not here is the wiring of one with no plugs.
zerothread?id=168246