need help wiring 6 individual msd blaster coils

[sleepin240]

scroll down and see what you think
Modified by sleepin240 at 3:46 AM 3/22/2007

[sleepin240]

I made a crude drawing to help

[sleepin240]

can someone atleast tell me if the signal coming from the igniter is negative trigger?

[sleepin240]

zerothread/219934

for reference
Modified by sleepin240 at 1:38 AM 3/21/2007

[Sil240]

Question???If you dont have these coils already why don't you just buy the same one in the write up since you don't know how to do it?

Shouldn't be that hard. I don't thinkJust hook up the MSD coils like the GM ones.Except you don't combine the wires. (ie 1+6, 2+5, 3+4)

Study the picture a little more closely.The timing wire from the 3 pin plug should connect to Cyl 1+ 6.

Usually coils are fired by grounding them.

[sleepin240]

i have studied it and I do have the coils now.... It should work according to how you said and the timing wire only goes to pin 1 from the factory homie.... and since im not running wasted spark i thought i might wire mine like that. I just wanted to confirm the factory signal wire was negative trigger before I fry out my factory ignition system

[sleepin240]

Here it s guys 6 msd blaster coils installed and working....

[Blown240sx]

Yea he just did. And he would like to give a shout out to all the doubters in the crowd