NC SC CHAT

[tdcoy510]

anyone in nc gotta s14 sunroof or sunroof glass?

or a zenki hood in decent condition?

[tdcoy510]

http://cgi.ebay.com/ebaymotors...82538

damn local pickup only...

[Zee]

my name is James, not Jay.

I was only saying Jay so I wouldn't have to type as much, but if it annoys you i could just call you J. lol

[tdcoy510]

i went to a few shops and called a few today doing some homework on a sr20det swap. i found a place in raliegh that i can get teh motor for 1800, but no transmission, ecu, just the motor. i don't remember the name of it though. anyone in nc that did a sr20 swap know of any good local shops that imports motors?

and i got some more pics of my s14 zerothread/262836

[Black on Gold]

There's a Sponor on here called Zerolift that sells the Blacktop SR at i believe $1900. Not quite sure. Check in with them. It may be cheaper to just do that with the entire swap rather then buy the one from NC and have to get a SR transmission (which i've seen go for around $200) and then also a ECU.

[whitetshirtguy]

j hot in augusta sells sr20 for about 1500 or so and you are not that and they have been around for a while and they sell alot of other stuff too

[crash n burn]

i went to a few shops and called a few today doing some homework on a sr20det swap. i found a place in raliegh that i can get teh motor for 1800, but no transmission, ecu, just the motor. i don't remember the name of it though. anyone in nc that did a sr20 swap know of any good local shops that imports motors?

and i got some more pics of my s14 zerothread/262836

theres a couple people that can, but they'll charge you an outrageous amount for it, your better off getting it through an online distributor, esp. one that are on NICO, check the advertiser's page. cruise around, search archived content to find where people bought their motors, you'll find real quick where to go and where not to

[Zee]

Check Jarco it is easier to call them because the only parts they have listed are for half-cuts they are in Georgia.

http://www.jarcoinc.com

[kouki munster]

I have a buddy that is selling a complete(motor, transmission turbo, ect...) bolt in ~300 whp sr setup. Let me know if your intrested and I'll give you his phone #.

[tdcoy510]

sure, whats he asking?

[kouki munster]

His # is 864-634-5943 just ask for guido.

[E7-S14]

I dunno about you guys.. but im Siked for the Drift-Practice day in spartanburg coming up in august in Spartanburg.

i wish i could enter tho... darn folks holden me back..

Soo.. Who all's heading down their?it would b cool to meet a couple a you guys

[gnvarnadore]

update on my project:

Well the 240 sits in the driveway taking up space as i have no drive right now to do anything to it. i'll keep yall posted if i decide to do anything to it besides letting it sit because right now im wanting to find a better daily driver because the 86 accord just doesnt cut it.

[gr8bryt]

I feel your pain Gregg, my 240 is sitting right now as well until I get a new mid-shaft bearing.

[rps13srsc]

im the one selling the sr setup that beatupsx was talking about you can call me anytime i have alot that gose with it including 5lug and zbrakes so call me and we will talkbtw you can test drive it if you wantand i can do the swap for you

[scs13]

how much do you want for the z brakes guido? i sure could use some. do you have an lsd too? are you selling the shell too?

[Zee]

Does anyone know a shop around here that would be able to do an RB swap? I would rather just ask questions here because if you ask the wrong kind of question instead of people asking what I mean. I get ****ing flamed. Fing Bastards.

[crash n burn]

NS performance in spartanburg did one that i was looking to buy a year or so ago..pretty decent setup, and they did a really nice job on some of the sr20 swaps i've seen

[Zee]

NS performance in spartanburg did one that i was looking to buy a year or so ago..pretty decent setup, and they did a really nice job on some of the sr20 swaps i've seen

Thanks for the heads up I will check them out.

[gr8bryt]

You may wanna check the RB forum to see if anyone can give you testimonials w/ shops they've dealt with.

[scs13]

luke got his car done at nsp. do it yourself though, its fun and rewarding. oh and probobly a thousand or so dollars cheaper.

[crash n burn]

luke got his car done at nsp. do it yourself though, its fun and rewarding. oh and probobly a thousand or so dollars cheaper.

well of course, but i dunno if its his first swap, rb is kind of trickey, it can be done.

the kid im talking about, austin, his HG popped a day after he got it back, he called them, they said give them till the end of the week, came down, picked up the car, took it back with them, fixed it..drove down to columbia after that weekend, delivered it back into his driveway, and gave him a 3 run dyno tune..in and out over a week. excellent by my books

the 1g is enough for the insurance for my tastes, ya know

[Zee]

well of course, but i dunno if its his first swap, rb is kind of trickey, it can be done.

the kid im talking about, austin, his HG popped a day after he got it back, he called them, they said give them till the end of the week, came down, picked up the car, took it back with them, fixed it..drove down to columbia after that weekend, delivered it back into his driveway, and gave him a 3 run dyno tune..in and out over a week. excellent by my books

the 1g is enough for the insurance for my tastes, ya know

It is going to be my first swap with a turbo-charged engine I have done other ones but not really sure how things will go with this.

[Zee]

Kesean do you live in the one of the apartment buildings near Westgate I seen you took some pictures from there at least I think it was there.

[Black on Gold]

hey Jordan. You have any idea on how much power i'd be looking at with a rebuilt KA and a ported head. By that i mean New Pistons, Valves, Valve Springs, Lifters, Cams and maybe new Rods?

Im thinking maybe in the 170-185hp range? Was just wondering because that would be the route i'd love to take.

[gnvarnadore]

pat how aggressive are the cams? cause that will play a major part and what size pistons will it have?

[scs13]

sr swaps are cake. just straight bolt in and a tiny bith of wiring. since you have a chuki it makes it that much easier.

pat - idk about that goal with that stuff done. pdm racing made 177whp 182tq with just i/h/e 104 octane tune. i would love to be making that much, and i should be but im not. with a s14 motor with s13 cams, removed emissions - egr, pair, secondary butterflies etc, intake, high flow cat, exh, and im sure a few other little things i only made 130whp 140tq. i should have made that stock so idk whats up.

after i turbo my car i plan on buildin an n/a ka. s14 ka with ka24e pistons 10.5-11.5:1 comp, pdm cams, i/h/e, itb's etc and everything ive got done to my motor now.

but i would say if you are shooting for around 200whp i would put a lil t25, 370s etc on your ka, for under 1g and it should be pretty reliable. that is unless you are dead set on n/a.

[Black on Gold]

I was just wondering thats all. I just had that idea for awhile. Maybe later on down the road because the head work will already set me back a good ways that i could put towards a T28, 550's and what not. I'll just have to shop around for another cheap KA. I have a feeling this one is shot as in needing new piston rings.

If i would go turbo, it would definately be on the KA because im not much of a person to save money so i'd just piece together a turbo kit with a paycheck each week.

Anyways, i drove the 240 for the first time in about 2 weeks and WOW, i missed that thing. I put in $15 in the tank and just drove around town for 2 hours.

[tdcoy510]

2 hours on 15 dollars of gas?! i need to fill up where u did.

[Black on Gold]

Yea, dont ask me how it was possible. My car runs ultra rich too