My S13Build

[newdude1]

[MICRoS13]

sweet build bro looking forward to the motor drop in

[Idahos13]

Looks good man that engine bay is pure sexy im diggin it! Good luck on getting your engine in!

[mRodiek]

Heres Positrons thread, he knows his stuff really freaking wellhttp://forums.nicoclub.com/zer...age=7

After I read this thread I went through and improvised a little with the other washers, I think I put 2 or 3 on the coolant return to block [towards front of engine] then there was 1 on the coolant return to turbo, 1 or 2 on the oil delivery to block as well...

Scroll back a couple pages in my build and Im sure youll find it.

[Chris28]

Newdude1...you're in Yorktown? I'm in poquoson haha. Let me know if you need help with anything.

[Brycicles]

Wow, that is a nice build.

[newdude1]

Thanks Brycicles.

Im gonna try and get the turbo and manifold on today. Will hopefully have pictures later tonight.

[newdude1]

Got the turbo on and all hooked up.



My dads beast lol

My new rack and pinion and tein inner and outter tie rods should be here today so I should have some more pictures later.

[mRodiek]

Why is your coolant delivery going to the water neck? Mine goes to the back of the motor.

[newdude1]

I have an s14sr20

[newdude1]

My parts came in

Tein Inner and Outer Tie rods

Rebuilt Rack and Pinion.

[mRodiek]

Whered you get the new rack & pinion? Looks good

[newdude1]

Frsports.com

[newdude1]

K today I installed the inner and outter tie rods on the new rack and pinon. Also trimmed out the inside of my valve cover to fit the RAS. The valve cover is a really dark pearly purple but it looks black.lol Well onto the pictures.

Also with the tie rods just in case anyone is wondering they are thicker then the stockers and seems alot more stiffer in the joints. Hopefully will be tighter steering. And I installed the spacer to get more steering angle.

[tunerinms]

Nice looking build. What are your horsepower goals?

[newdude1]

Im not really looking for high hp. I would be perfectly happy with 280 with a quick response. Im building this for a daily and some track events.

[newdude1]

Well after a lot of annoying problems, I finally got my motor in, well in just not bolted down. I must say it did take for ever but owell. My JWT ecu I had to order should be in, in two weeks. So itll be ready to run by then. Well on to the pictures.

New rack and pinion with poly urethane bushings.











Modified by newdude1 at 4:54 AM 6/9/2009
Modified by newdude1 at 4:55 AM 6/9/2009

[mRodiek]

Yay!!

[jpnissans13]

nice build!!

[newdude1]

Thanks dude.

[breadbox]

Nice rack! Also like the purple.

Keep it up.

[newdude1]

Well after taking another look at the motor seems a little slanted to the driver side. Is this normal or should it be flat?

[newdude1]

I got some pictures. You can kind of tell it looks a little crooked.

[newdude1]

So is this normal? I cant remember the way it was before lol.

[jpnissans13]

my ka24de is slightly tilted sidways also! i think its normal!

[93240cooool]

it is normal, most if not all nissan motors sit like that for oiling purposes.