My New Wheels / Wide Body for 2014

[06M4.5]

I finally was able to get most of all the major stuff done with the car.

My new look for 2014, here is a pic of the new wheels & wide body:



sad to see that the pic really doesn't show the wide body or the deep concave of the wheel.

[TXT]

That looks quite exquisite. Great work.

[svard75]

I see it clearly. Very nice!

[Larz]

I see a difference in the rear quater panel and the wheels have a definite concave style. I think it looks fabulous!

[The Bodyguard]

[bicsintegra]

Even Better!

[06M4.5]

Thank you to all.

Just can't get a good shot, too much dirty snow:

[mexillis]

nicely done!

[CPJ LB]

SSSiiiCK!!!! Great work Freddie....

...just curious, did they have to modify the rear/side bumper and aero skirt?? I'm looking into going with a slight wide body modification and was wondering that...that's why I've been putting off getting the Sarona side skirts and rear bumper skirts....

overall, great job!

[06M4.5]

Thanks to all the members that took the time to post here.

CPJ fender are 2" wider and was done to look as oem as possible. Thus the reason the pics show very little. It's a diff story when your looking at it in person. fenders are made to be able to fit a 20x11 with no problems at all

Door has been pull out about 1/2"- 3/4", work was done to the door in order to smooth out the quarter panel.

Bumper was also pulled out but I'm not sure by how much, if I had to take a guess I would say about 1" on each side. it could be a little more.

Side skirts & rear bumper lip didn't get any work.

Here is my setup:

Staggered Niche Nurburg with Vredestein tires

Running static on D2 Racing coilovers

Front 20x10 et42 with 275/30 (small concave with 4" chrome lip)

Rear 20x10.5 et25 with 285/30 (deep concave with 5" chrome lip)

No camber added at all.

The widebody looks great with the custom fender vents.

Here is a close up of the door work:



yea I know, hard to see

[CPJ LB]

Thanks to all the members that took the time to post here.

CPJ fender are 2" wider and was done to look as oem as possible. Thus the reason the pics show very little. It's a diff story when your looking at it in person. fenders are made to be able to fit a 20x11 with no problems at all

Door has been pull out about 1/2"- 3/4", work was done to the door in order to smooth out the quarter panel.

Bumper was also pulled out but I'm not sure by how much, if I had to take a guess I would say about 1" on each side. it could be a little more.

Side skirts & rear bumper lip didn't get any work.

Here is my setup:

Staggered Niche Nurburg with Vredestein tires

Running static on D2 Racing coilovers

Front 20x10 et42 with 275/30 (small concave with 4" chrome lip)

Rear 20x10.5 et20 with 285/30 (deep concave with 5" chrome lip)

No camber added at all.

The widebody looks great with the custom fender vents.

Here is a close up of the door work:



yea I know, hard to see

ok, got it.... very nicely done. I like the way the fender work could pass as OEM.

that's the look I'm going for....I'm thinking of keeping my stock wheel/tire set up, and swap out the 15mm spacer for something 25mm or 30mm

Speaking of Niche wheels...I like what they've come out with recently..My buddy's shop has a good business relation with MHT..this is what I'm looking at:

http://www.mhtwheels.com/mht-luxury-all ... m?id=15099

[06M4.5]

That's a nice wheel your looking at.

I would tell you to get the side skirt and rear lip first. I think Don Blaze34 is selling a nice set which came from Japan. It would make your car stand out as those parts are somewhat rare.

Good luck with the body work, it takes lots of time and lots of cleaning after everything is done

[Vvsm45]

I finally was able to get most of all the major stuff done with the car.

My new look for 2014, here is a pic of the new wheels & wide body:



sad to see that the pic really doesn't show the wide body or the deep concave of the wheel.

You wasn't playing when you told me your doing wide body haha! Must say very clean and looks OEM. "beauty and the beast"

[06M4.5]

Thanks Vvsm45

yup I told you I was working hard for a new look for spring time. The car should be totally done in a few weeks if the weather breaks in to the 50's

[GQM45s]

sexy.......

[Wangtang408]

Clean as f*ck! Good job Freddie

[the1stTree]

Nice!!!

[06M4.5]

Thanks guys for all the kind words

Still need to get stickers for added power

[TXT]

Thanks guys for all the kind words

Still need to get stickers for added power

Yea get one of these Fast and Furious style decals on the side and you will be in business.

[06M4.5]

That's too much for me

[stm37s]

Freddie that is one hot ride you got there my brother, it just keeps getting better and better!!!!

[06M4.5]

Thanks stm37s

A little test on the new 285/30 tires:

View My Video

She not only looks good but she likes to go too.

[06M4.5]

She just got her 1st wash and was put away for the upcoming snow storm

[stm37s]

nice video Freddie, where did you get your wind visors from? I like how they cover the entire front, back and rear quarter panel

[06M4.5]

nice video Freddie, where did you get your wind visors from? I like how they cover the entire front, back and rear quarter panel

Thanks

The 6pcs visors can be seen in ebay, like this link:

http://www.ebay.com/itm/Auto-Ventshade- ... 2a&vxp=mtr

[Cabo]

nice video Freddie, where did you get your wind visors from? I like how they cover the entire front, back and rear quarter panel

Where I bought mines $129 shipped

http://www.autopartswarehouse.com/sku/I ... ccessories

[stm37s]

thanks fellas, just checked and they don't make them for the 11m37

[06M4.5]

thanks fellas, just checked and they don't make them for the 11m37

Did you try the dealer?

[TXT]

http://www.amazon.com/Auto-Ventshade-79 ... +ventshade

wind visors are on Amazon and are Prime for cheapest price yet....112. And free two day shipping if you have prime.

[06M4.5]

Look what happens when the sun comes out: