Mesh Crew Leader w/ Something to Prove *56K..ill Yourself*

[Driftless240]

So I created the Mesh thread to support all out Mesh Habbits. I finalllly have something to prove my self worthy of holding the position of Mesh Crew Leader...

Here is what it looked like as of the beginning of the year:



And here it what it looks like as of today...

(Don't mind dirty fitment shots, Gravel Lot next to house + Rain = For The Loss.)

Front Fitment: Very Happy!

Rear Fitment, How SEXY!:

I can only seem to find one of my Coilover Wrenchs, so the drop is what I had it currently set at before. That will be changed soon, as soon as I borrow one of my buddies, and we can get that sucker slammed.

Front Drop (Not near enough!!):

Rear Drop (Not near enough!!!):

And here you go guys!!!

(Favorite Shot!!! Shes so low, all I had to do was raise arms up, lol)(^^ Second Favorite Shot!! ^^)

..Now with BRAND NEW Gold Enkei 92 Mesh Rims, 15x7 +25 w/ Kumho Ecsta ASX 205/50/15 Tires.

Sorry for the somewhat repeated pics, just wanted to get every angle and whore the hell out of my car, before I worked my 10 hour shift today. Man am I so happy I went with the Gold Enkeis instead of the Blacks, I love it so much. Contrast is your friend! (Thanks Adrian)

It seems like I need to get an alignment though, I am getting a bad angle of my wheels when I turn (Caster), you can notice in some pics as well, maybe related to my Mystery Tension Rods...

I also just washed the car last night and already it has a fine coat of dust from the lot that is off our house *Tear* and also a Bird left a nice congratulations on my rear taillight/bumper, as you can see in some pics as well. Let me know what you guys think!!! (Full Car Spex available on request.)

Oh, and for those who want to know what is under the hood:



KA AND PROUD!!! and it will not be changing any time soon, it is just too clean to let go. When it does change it will have a "T" on the end of its code, and that is all.

240 "Build Thread" Coming soon... Won't much be a build thread as a 240 journal...
Modified by Driftless240 at 7:56 PM 5/28/2007

[Fenris]

hmmm... your S13 is officialy too full of sex. Please back away from the keyboard slowly and go drive. Leaders cant be garage queens

[le_ryan]

HOT DAMN !!



now whats missing ...........

XENON FRONT LIP !!!

[Driftless240]

hmmm... your S13 is officialy too full of sex. Please back away from the keyboard slowly and go drive. Leaders cant be garage queens

I wanted to wait for a few posts to hop back in here, but I can't help it!! Thank you sir, and those words mean more then anything right now, seeing it has been forever since I have gotten the chance!!

now whats missing........... XENON FRONT LIP !!!

You know that was all I was thinking about today, imagine that with OEM 180sx Side Skirts & an OEM Canadian 240sx Rear Lip.... Subtle & Sexy!! (And later the third of the S's, Sleeper.)

[nieko]

coulda cleaned the bird poop off the back first!!! but on a good note yum lol

[mrgreeneyes]

congrats man! that car is super clean sans the bird's "congrats".

your car is confirmation to me that i should order coils next week. thank you sir.

[Driftless240]

congrats man! that car is super clean sans the bird's "congrats".

your car is confirmation to me that i should order coils next week. thank you sir.

Yea, the congrats wasn't noticed till half way into the shoot, but I was too excited to stop, clean, and start again. Hehe.

Man, I am glad my car inspired you to finally take the leap, you will be sooo happy. My Suspension setup is just Entry Level, but I am soo happy on how my car sits and reacts to my every which command.

[l2efused]

looks freakin sweeeet!

[Driftless240]

looks freakin sweeeet!

Thank you sir, now get a set of your own, I see you lurking around the Mesh Thread, can't deny it... You won't regret it man.

[mchkc240]

Sweettttttttt

[notslow]

thank you sir.

Thank you sir

No, thank you sir!

[l2efused]

Thank you sir, now get a set of your own, I see you lurking around the Mesh Thread, can't deny it... You won't regret it man.

hahaha ya. my friend jsut picked up a nice set and i was looking at some before he got them and once i saw them on his car i instantly fell in love with em.

someday hopfully il get me a pair

[adrianfromthecastle]

Contrast is your friend! (Thanks Adrian)

[slipstream_pnoy]

very nice, thinkin about putting mesh rims on my zenki

[Driftless240]

very nice, thinkin about putting mesh rims on my zenki

Sent you a link to give you an idea of what you are looking at, I didn't want to post here because I want to stay on topic, the best that we can. GL.

[FusionR300zx]

hott! don't worry about being a garage whore... at least ur car runs... haha

[le_ryan]

hey Ryan, what do you have for suspension again..?

[Driftless240]

Front Suspension is just: Suspension Technique Sway Bar, Front Strut Bar, Tension Rods & Camber Plates. Strut Bar is going to be replaced soon because it is unknown and cheap & Tension Rods are in really bad condition and will most likely be purchasing my friend's SPL V2's.

I do need to correct myself in my OP, I stated I needed to adjust my Camber, which is incorrect, I need to adjust my Castor... Tension Rods.

Lol, yea I am a garage whore & I can't wait to become a street whore, wait... uhh... yea... ok... Well I would be making good cash.

[mattscar]

Nice. How much did you pay for your 15x7's?

Just curious. Unless I missed a post...

[lofapoo]

CLEAN ****in' car, Driftless! Not bad, for a hatch

Goddamit, I love Enkeis, and yours look sooooo good with all that meat on them. 15x7, too, and with all that lip... where do you live again?? :P

[gripstr]

HOT DAMN !!



now whats missing ...........

XENON FRONT LIP !!!

Driftless better be in that group Buy!!

and why does your car look like it has been lowered?

[Driftless240]

Nice. How much did you pay for your 15x7's?

Just curious. Unless I missed a post...

No worries, I paid $650.00 plus shipping. Reason being, they were Brand New and my Mesh Dealer's prices went up, so my prices went up too. But they were brand new, so I know what I was receiving, so I was willin' to pay top dollar for them.

CLEAN ****in' car, Driftless! Not bad, for a hatch

Goddamit, I love Enkeis, and yours look sooooo good with all that meat on them. 15x7, too, and with all that lip... where do you live again?? :P

Hatch Power!! Hehe thanks for the words, I like "Squared" off tires (not stretched, flush with rim) and well I have seen the size on a few other 240's and I like it, lower profile with some enough meat to protect my wheel on the shytty roads. Honestly, pictures don't do the justice on this lip, it looks soooo much better in person, no joke. I like in Des Plaines, Illinois with my Rautweiler and shotgun...

Driftless better be in that group Buy!!

and why does your car look like it has been lowered?

I hope I can get on this group buy, I am still in the maybe catergory, based on my check and I have some other shyt that I need to take care of, all depends.

Oh, and my car looks lowered, because...it....is? Hehe.

[nvrplzd240]

She's lookin cleaaaann bro

[koukicody]

You know that was all I was thinking about today, imagine that with OEM 180sx Side Skirts & an OEM Canadian 240sx Rear Lip.... Subtle & Sexy!! (And later the third of the S's, Sleeper.)

you have good taste my friend. thats EXACTLY the way i want to do a hatch if i ever got one. coupe would be the same, but with the coupe JDM rear valences of course

[neverlift]

looking real good driftless man I need to get one riken and some rubber.

hey nvrplzd you got the ca runnign yet?

[Driftless240]

you have good taste my friend. thats EXACTLY the way i want to do a hatch if i ever got one. coupe would be the same, but with the coupe JDM rear valences of course

I like the 1 piece lip better then the 3 Piece. Also why I liked the G-Grow Lip back when you could find them.

looking real good driftless man I need to get one riken and some rubber.

Hehe, thanks. My first Mesh ownered were the Riken, and wasn't feelin the Enkei, but they they grew on me! Lol.

hey nvrplzd you got the ca runnign yet?

Nvrplzd, as your official Thread Attorney I order you NOT to answer that question!!!!

[nvrplzd240]

hey nvrplzd you got the ca runnign yet?

CA? What does this mean? I'm not about to run from Indiana to California.. that's just crazy talk man

[Jiggyfry]

CA? What does this mean? I'm not about to run from Indiana to California.. that's just crazy talk man

[jj alfano]

how do you get your tires so flush with the fenders? Thick rims or wheel spacers? I would say the tires, but they are only 205's. Im trying to get the non-sucked in look because it just looks amazing when they poke out like that. Thanks

[AmoebAssassin]

Looks good!

However, it'd look better with no wheel gap, spacers, and a roll