Major oil pan sway bar interference

[Neejay]

Are you just interested in one set? I think theres some aluminum bar stock lying around at my machinist's if you want one... I could get him to whip one up if the NC isnt in use .

Definitely interested. Are the bolts included? Or at least let me know what size bolts to get. Thanks man.

[ST240]

Yes i will include bolts/washers but they wont be anything special haha.

[Neejay]

Yes i will include bolts/washers but they wont be anything special haha.

Ok, that's cool. Just let me know!

[ST240]

something was wrong with my email, anyone who emailed me should do so again [email protected]

[Neejay]

something was wrong with my email, anyone who emailed me should do so again [email protected]

I'm not sure if I was supposed to email you, but I did. lol

[HxC_Nismo]

you can also use an A31 Cefiro rb20det front sway bar and it will clear all rb oil pans on a s chassis. thats what i used for my rb26 oil pan and it clears perfectly and also clears the nismo power brace.

heres the thread with picshttp://forums.nicoclub.com/zerothread?id=303121
Modified by HxC_Nismo at 5:23 PM 7/6/2009

[blackmansir]

Hows this for Jimmy-rigged? Had my machinist make me a pair of these. Fitment is damn near perfect.The arm that goes from the sway bar to the control arm isn't perfectly vertical anymore. Might lead to some premature bushing wear. Oh well thats life owning an RB in an S-chasis i guess.







Thats almost too much clearance lol.

If there's demand, and if i get approval, Ill sell these in fabricators market for a competitive price.

Hey trying to figure out what dimensions you used. Going to get a machine shop here to make me a set.

[blackmansir]

Hows this for Jimmy-rigged? Had my machinist make me a pair of these. Fitment is damn near perfect.The arm that goes from the sway bar to the control arm isn't perfectly vertical anymore. Might lead to some premature bushing wear. Oh well thats life owning an RB in an S-chasis i guess.







Thats almost too much clearance lol.

If there's demand, and if i get approval, Ill sell these in fabricators market for a competitive price.

Hey man sounds good. I ordered a set from Daft Innovations, but don't think he's going to get them anytime soon. Let me see what he says in the next two days, if nothing i'm going to get a refund. Hey do you have a facebook. If so hit me up on there, my email is [email protected]. Send me another private message on here letting me know yours man.

J

[Tenchuu]

just a thought, instead of spacing down the sway bar and making it less effective, you can get sway bars that will work. I have a sickey that clears a S14 with syko mounts and R32 x member by about 3 in forward. I have *heard* that others work also. made quite a noticeable difference going from those spacers and stock to the sickey one, everything i read on road racing forums suggests spacers are a bad thing for handling.

[blackmansir]

Hows this for Jimmy-rigged? Had my machinist make me a pair of these. Fitment is damn near perfect.The arm that goes from the sway bar to the control arm isn't perfectly vertical anymore. Might lead to some premature bushing wear. Oh well thats life owning an RB in an S-chasis i guess.







Thats almost too much clearance lol.

If there's demand, and if i get approval, Ill sell these in fabricators market for a competitive price.

Hey how long would it take you to get those spacers made?

[ST240]

I have a bunch made up, I can send you a set if you want. email me at andrem85 at telus dto net.