junk yard in australia

[eh?]

Shall we start a list?

I'm looking for an RB30DE short block. How much.

[PROJECTRB240SX]

Interested in a: rb30e blockr32 rb25de non-vvt head and intake manifold/plenum/fuelrail1.2mm rb25de non-vvt metal headgasketn1 oil and water pumps

also a r32 rb20det Microtech LT8s or LT12s bolt-in system

[PROJECTRB240SX]

I just need pricing first.

[Touchdown038]

Interested in a:Redtop or Blacktop S13 SR20DET, or CA18DET, depending on pricing for each motor.

[Wulfgang]

Waaaait. I thought that the reason we get engines from Japan was LOW MILEAGE. And don't Aussies typically run their cars to the ground like Americans do? What's the likelihood that these engines will be under 100k even?

[goofynick6]

Don't forget, you still have to get the item shipped to your house once the container comes into the port

Nick

[BoostFab]

i will bow down to the one that can get me the rb30 motor

[PROJECTRB240SX]

WHERE OHH WHERE HAS GTR SHOP GONE?

[Wulfgang]

He's gone down under so you'd better be good...So you can get your motor when it reaches the port.

couldn't resist

[GTR Shop]

Back guys.. been busy painting shop.

I'm not in Oz!, I'm in NZWHat I asked for was a continuing list so I didn't have to search through posts

Most of the engies here are NOT In junk yards.. infact completely the opposite.. decent cars don't often get scrapped.. they get repaired.. I buy straight whole GTRs form Japan for parts..

OK.. from the topRB30 short blocks $400usRB20DE/T heads $250RB25 non VVT heads $350usRB20 crossmembers $150usRB25DET complete engines $2000usRB26DETT complete engines $3000usRB26DETT front cuts $$4500usMicrotech LT12S with RB adaptor loom $1050usMicrotech LTX12S with RB adaptor loom $1050usMicrotech LT8 $799usMicrotech LTX8 $799usRB20 R32 gear boxes $500usRB25 R33 gearboxes $650-$1800SR20 (S14) gearboxes $600GTR gear boxes $1200

All + freight

Anything else, just ask me.

[GTR Shop]

If we can get a container full, then I can work possibly drop 5% ont he pricing of engines and parts.

[JimmyJames1]

Are these engine sets or half cuts? If they're engine sets, what all do they come with?

[GTR Shop]

Front cut is listed as 'front cut'.. they are complete engines.. fan to flywheel

[Bluefire]

Hey GTR shop i been emailin you about the stock rb25 heat shield, but no reply, please let me know what is goin on with that cuz I need it asap!!! email me at [email protected]

-Bluefire

[Touchdown038]

Guess my request for an SR20 price quote was just laughed at in the RB forum.

[GTR Shop]

I missed out RB20DET engine $1750us Woops

[GTR Shop]

Touchdown.. it wasn't at all.. prob is supply of good SR engies.. they are engine too expensive, or ****.

I don't like dealing in ****

Bluefire, check your email

[S13Sil-line]

GTR what about my e-mail from johnhardcore?

[GTR Shop]

John Downing is it?

[BoostFab]

GTR: are you working on arrangement for the freight shipment to the doors or another party is in the picture?

[GTR Shop]

I am organising container packed etc and read to go.My freight man (who I met with his week) has the rest under control.You can either pickup from him or organise shipping or he may be able to organise for you.

[S13Sil-line]

Yes thats me.

[GTR Shop]

In process

[dareo]

My say would be to pack in 20 RB30s and call it a day, the rest we can get from Venus Auto ect ect. But the RB30 nobody that i've seen really can sell them in the US. Bolt up a RB30DET, put it in the crate, sell it for 3000 when it gets here. Get Tophat to make a mount kit if needs be.

It would be a lot of work on your part but if you can get the parts cheap enough you could make some $$$ and get a really badarse engine to the US for us. I would buy one if i could do the whole swap for 4k or less.

[dareo]

You could probably get people like Heavy Throttle, Phase 2, ect to buy a few if you need more buyers for the Rb30s. That'd make it easy to fill a shipping crate

[GTR Shop]

If thats whats people are interested in I do basically any spec required.Everyone knows what the block and heads are worht as listed above.If there is enough interest (around 10 maybe) then I can offer them as a base, and then with options like N1 oil pump, N1 water pump, new bearings, pistons, rods, cams, head gaskets etc etc. whatever really....

[PROJECTRB240SX]

DO THOSE RB25DE NON-VVT HEADS COME WITH MANIFOLDS? COULD YOU GIVE A QUOTE ON N1 PUMPS AND A GASKET SET?

DO YOU HAVE THE ADAPTERS FOR THE LT8 MICROTECHS? THE US MICROTECH SELLS THEM.... I WAS WONDERING IF YOU COULD GET THEM ALSO?

SO WHO WANTS TO BUY TWO RB20'S?

[BoostFab]

My say would be to pack in 20 RB30s and call it a day, the rest we can get from Venus Auto ect ect.

that's more like it but if you can get a better price than those places, why not keep them coming.

GTR: about the RB30 short blocks, are they complete with internals and accessories?

[jbanach77]

bump. maybe we should start a thread for those who are definate on the motors needed so that gtr shop can get a hardcore picture of what is desired.

[BoostFab]

i'm waitint to hear about the state-side shipping rate.