IM GOING TO BLOW IT UP

[ZOMG.SR20]

the 240 that is..... i replaced the MAF has a New IACv and now a new ECU WTF it wont even attempt a start now WTF IM PISSED

[ZOMG.SR20]

it has spark fuel all the good stuff and it wont F***ING Start

[pedobear-lovin]

make sure you videotape it and post it up!

in for the explosion!

[shanelach]

http://www.livejournal.com

[ZOMG.SR20]

no but i just bashed in my windshield with a bat

[pedobear-lovin]

no but i just bashed in my windshield with a bat

pics or

[keith0486]

http://www.livejournal.com

+1 to that

[AZhitman]

no but i just bashed in my windshield with a bat

Does it start now?

[ZOMG.SR20]

no its just that i put another 500dollars in parts in to this and im still no farther in to it running and no one is ever in the SR forum so help is usless there

[keith0486]

hit me up when ever u want it out of your hands ill take headache away.

[zach-Ka]

Are you wanting to make it work or you really just want to blow the S.O.B. up? I have boom boom materials..

[zach-Ka]

no its just that i put another 500dollars in parts in to this and im still no farther in to it running and no one is ever in the SR forum so help is usless there

What exactly is it doing when you turn the key?

[ZOMG.SR20]

i want it to run it was running not great but it was now all it does is turn over and not kick over

[keith0486]

did you got threw all the wiring thats the first thing i would do when i had my 240 the wiring going to the fuse box under the hood was messed up and my car would only start if u moved the box around some.

[AZhitman]

no one is ever in the SR forum so help is usless there

Ummmm, not so.

It's one of the busiest forums.

Fuel + spark = run.

Get your FSM and get to work.

[zach-Ka]

Maybe do the timing again, and make sure your not 180 out. When it wasn't running great what was it doing? Did it smell rich?

[OutToWinPAHC]

Dude chill the eff out... do you have good voltage to the starter relay aka solenoid? Does it try to start? If so how is the timing?

[ZOMG.SR20]

it smelt rich but it RAN beautifully the only problem then was that there was no idling the timing is spot on at 15*BTDC

the starter is BRand newand ive gone through all the wiring in the engine bay

[ZOMG.SR20]

Ummmm, not so.

It's one of the busiest forums.

Fuel + spark = run.

Get your FSM and get to work.

maybe busy but whenever i ask a question it takes 1 week for a answer

[OutToWinPAHC]

Dont count on wiring looking right, get a meter on it, make sure the voltages are there and good.

[keith0486]

well whats it doing when u turn the key nothing or do it try and kick over?

[zach-Ka]

This may be stupid but have you checked your plugs? This happened to me at one point and that was it. Have you checked the TPS voltage?

[zach-Ka]

Are you getting 12v at each coil pack?

[ZOMG.SR20]

well whats it doing when u turn the key nothing or do it try and kick over?

it turns and turns over but no kcicking

This may be stupid but have you checked your plugs? This happened to me at one point and that was it. Have you checked the TPS voltage?

umm not yet they were new and TPS nope

[keith0486]

if its just turning but not kicking over wouldn't that have something to do with spark?

[zach-Ka]

Its just something to try, by now they are probably fowled anyways because your dumping fuel on them and it not turning over.

[OutToWinPAHC]

You got crank, you got air, check fuel and spark, if that dont work try the spooling drizzle and flux capacitor...... my bet its spark.

[alms24sebring]

y was there no idle, leaky injectors, crank angle sensor? it may be flooded now though because of attempted starts. check for a strong battery too

[zenki-S13]

maybe check your distibutor

[GO240]

reset your timing and check your fuel lines its something simple just do it if not i'll buy it from you