IM BACK!

[Nismo400R33GTR]

it's crazy how many times after a few years i end up on this site lol... well i can tell you right now that the 2nd 240sx didnt last long as i had to go to school...bummer however i think it's better, since then i now have aton of auto body and mechanical background plus i am now a full time painter and body man for the military. and my bank roll is WAY nicer to me now lol, so here is where we start again. this next friday i will be driving to greenbay to pick up my 1989 20sx HB for a grim $500.00 lol! the project as it stands will get the sr20det, it will have the drifter s15 conversion (i know most you hate this conversion but it's a good thing it's my car and not yours) plus i happen to run across some nice s15 taillights and i have made a fiberglass mold to replicate the wicked s15 rear quarter panels (this way i can make the bodylines match up so the car dosnt look so mismatch with round on boxy) got some nice nismo 5 spokes at 17' with a bad a** bronze nickle plating, i also just got done rebuilding a garret t3/t4 at work because i was bored!and for anyone about to bash the taillight thing dont bother i know it's a pain in the rump to do but im lucky enough to have a cool boss and 4 metal workers on hand so i dont have to cut and paste i can make my own tail light/trunk rear support i will post on this topic as i go along including pictures.feel free to throw your 2 cents in or suggestions, since it was your suggestions that car my last car done go nico

<---note the body lines
Modified by Nismo400R33GTR at 9:41 PM 7/11/2009

[Anime_TuneR]

Update us with pix when you can

[Nismo400R33GTR]

yep i pic up the beast on saturday the 18th

[Anime_TuneR]

Pick up mine from the body shop next week before Wednesday for sure

It'll be the first time I'll ever start her up and drive her

[Nismo400R33GTR]

nice dude, happy for ya. im a bit excited myself ive been on here for a few hours now planing who where and what im buying

[Nismo400R33GTR]

anyone know a nice place to get the widebody rear quarters? all im finding is junk online..

[Anime_TuneR]

try intensepower.com

I got my fenders from them quick and great customer services

Worth a look into

[Nismo400R33GTR]

thanks anime

[Nismo400R33GTR]

wow dude nice website drop, 289 for both 50mm rears...noice!

[Nismo400R33GTR]

got some pictures of my toy you might all enjoy just got done with the rebuildas you can see it was in bad shapenice and new after the rebuild and cleaning
Modified by Nismo400R33GTR at 11:51 PM 7/11/2009

[Nismo400R33GTR]

no comments on my work on the turbo eh??

[Razi]

We can't see the pictures.

[Nismo400R33GTR]

there fixed the pictures

[Sr20S13Det]

Nice work. So what are your plans for the motor? Pistons, Rods, Valves, Springs, Cams? Keep us updated. Def wanna see pics once you start the body work

[Nismo400R33GTR]

for now just a rebuild kit, the motor dosnt look...good...but dosnt look bad eather so i figure might as well just do it.

[s14tan]

Sounds like a nice project you have in your head, I wish you luck on it man.And you did a nice job with the turbo, Even though it looks like you only cleaned it up.

Keep us updated as you progress with the build and glad to have you back!

*Side note* you've been a member since 06 and only have 40 or so post, you're a super troll lol.

[Anime_TuneR]

haha! Just remember those rear fenders is going to need some work.

I envy you though for the turbo

I wouldn't mind running boosted at the same time as S15 converision

[Nismo400R33GTR]

well i did clean it, however i have guys at work that rebuild turbos for a living, so they cleaned, rebalanced and re sealed everything, even nice enough to repack the bearings, i did however have to soak the compressor side housing in an aluminum acid to remove the oxide and then polished it by hand with 1200 grit sand, never dull and some mothers mag an aluminum polish. and as for the posts i prefer to do more reading than typing. i learn more

[Anime_TuneR]

^Basically new again. Gotcha

[Nismo400R33GTR]

yeah not bad for a turbo i payed $20.00 for, from a 92 saab 9000 i pulled out of a junk yard eh?

[s14tan]

Sounds like it was a win win on your part man.

[spooled240]

sure that isn't a straight t3? I don't think saab's came with t3/t4's.

[MastaYu]

turbo looks good

[Nismo400R33GTR]

yeah im sure it's a airresearch t3/t4

[Nismo400R33GTR]

well as usual my luck sucks, i was going to pick up this 89 HB from some kid in Greenbay wisconsin but now he's not answering my phone calls or texts, so i guess thats a bust....so if anyone knows of any 240sx's for around wisconsin, leme know

[Anime_TuneR]

Oh man, he probably already sold it

Hopefully a better deal comes your way

[Nismo400R33GTR]

me 2

[Nismo400R33GTR]

well that didn't take long, i pick up a nice 91 red HB for 900 Friday night! woot got pictures to



some rust on the rockers but no rust in the wheel wells or the trunk (crazy huh?) plus the interior is nice were back in business

[s14tan]

Congrats man! Can't wait for some progress!

Question, Why a S13 HB and not a S14 to do the body mods on? I personally think it would look better on a s14 cause S14 and s15 bodies are very similar.

[Nismo400R33GTR]

well i have 2 reasons, one is ive wanted to do it to the hb a long time and 2 my budy matt is doing it on a s14 at the same time so..i am kinda doing both