I ordered red Sportmax 002 15X8!!!!

[Florida240sx]

the fact isIm not trying to be an *** man. Its just your making your car look half ***Get the fenders rolled and it wont look bad. But right now you look liek a redneck with a camaro

So is my 4x4 the same way??? H3ll those rednecks in the SS camaro **** themselves when I pulled away....KA-T....Some people mod there cars in different orders. I prefer speed over looks because I'll either be a blurr to you or in front of ya. I hate those mercedes rims "my opinion"I'm on a tight time schedule, I can't do a whole lsd swap, coilover install,fender roll, and wheel swap in one weekend. Becasue I only have 6hrs of free time.Yes I should of done suspension mods first because I can't hook for ****. but the look on their face once Ido and go past them is priceless. Thought about leaving my car this way because people look at like it's crap, until they try to showoff by racing me...then their attitude chnages

[sensibleS13driver]

lol@this thread

none of you are half as cool as you think you are

[greengt2nv]

1st off these arent the first set of wheels i bought. yes for the 240 they are but...whatever... well I never said I was cool. but now that of thank of it I am! lol jkand yes the tires I have are way to big but I needed to see what the wheels would look like.My next mod will be rolled fenders, and maybe around tax time I will get coilovers. Just don't have the money to buy everything at once.

[l80_240]

look good, i almost got the red ones cause my cars red but i got the black ones, def. need to get coils man and if theres a shop near you that can weld/do custom work you could have them make fender flares for you, and dont pay att. to yokota180sx cause he couldnt even paint his car with real paint its your car dude and youll always have haters but just keep goin and good luck

[yokota180sx]

gah yall arent getting the point

Im not really hating on the kid to omuch for the wheels. Just the size and the body that isnt modded for hte fitment.

I dont need to be like viceroy. THey are much worse than i will ever be.

[Florida240sx]

gah yall arent getting the point

Im not really hating on the kid to omuch for the wheels. Just the size and the body that isnt modded for hte fitment.

I dont need to be like viceroy. THey are much worse than i will ever be.

He's got plans for it. Just like I have a fender roller on order. He's just doing things one at a time.

[sensibleS13driver]

haha, says the guy preaching 9 +0 and running 8's with spacers and overpulled fenders.

[greengt2nv]

hahaha^NOT! Who the **** are you? if you are talking about that miata go to a mazda forum if you are looking for attention!

[sensibleS13driver]

Eh, I've been around a little longer than you. Anyways I was trying to defend you, nevermind

[greengt2nv]

anyone have links to show me how to do rolled fenders. besides the one where you need a fender roller?

[greengt2nv]

Sorry. you just came across as a c0ck thats all.

[Feint of Heart]

anyone have links to show me how to do rolled fenders. besides the one where you need a fender roller?

Search - Fender Roller, rolled fenders, etc..

Here's how you do it with a roller:zerothread?id=206183

Here's the 'ghetto' way ,

Get yourself a baseball bat, put it between the tire and the fender, push down on the handle of the bat and roll it along the tire. This will flatten the inside of the fender...make sure you clean in there first, you don't want it to rust out. I think that you can figure it out yourself based on what I said. Just take your time, and don't rush it. Or you can find a place with a fender roller, and that'll make it easier.

[240on430]

are those 215/65s?

[greengt2nv]

thank man! I will try the baseball bat first if I think I am gonna f--- it up I will just go somewhere and have it done or something.

[greengt2nv]

215/60s... I don't mind them that big in the rear but in the front they just look wrong.

[DuaneG]

Sensible, don't worry too much about it. He's just in defence mode. I'm sure he wasn't trying to be a d!ck to someone defending him, not to mention him replying to you like that made no sense with what you posted above him.

Green, don't use a baseball bat.. Period. Too many horror storys. Plus you don't want to have to buy new fenders, it'll be more expensive to have to buy one front fender than just to have it done right. If you mess up your rear qp, death to you.

[greengt2nv]

Well my front fenders are both shot so its lose lose situation anyway so I just want to see if it will work. just on the front. rear quarter panels arent worth ****ing up.

[DuaneG]

There was a magazine I have that taught you how to roll with baseball bats. I'll find it and type it up, give me about 15minutes.

[DuaneG]

Can't right it right now, I will look later tonight..Or you can rent a fender roller and all that jazz for 50$ :P

http://www.rollyourfender.com/rentalinfo.html

[Florida240sx]

I'm getting one for x-mas

[sensibleS13driver]

I just sat in my fenderwell and hit the lip with a hammer until it was good and flat. It was easy and you can take it as slow as you want, use some heat if you like. You shouldn't have to worry about your QP's buckling since you won't need to pull, and I don't think you're too worried about your paint

[greengt2nv]

lol your right about the paint. oh and on the rental thats ridiculous $250 deposit. well I will figure something out.

[DuaneG]

Well hey man, let me rent your car for 50$ with no deposit. I'll return it when and if I feel like it.

[greengt2nv]

yeah i know but I am sure I can get one in my area for cheaper than that. thanks anyway.

[DuaneG]

You can BUY one for 200$ without an instruction manual, heat gun, etc etc.

[greengt2nv]

yeah but I am a broke white guy who is living off unemployment.

[yessir240]

I would be cool if i actually read to the last page of the thread myself

[greengt2nv]

I never said I knew more about 240s. It just sounded like he was being a c*** before. I appologise!

[Feint of Heart]

I just sat in my fenderwell and hit the lip with a hammer until it was good and flat. It was easy and you can take it as slow as you want, use some heat if you like. You shouldn't have to worry about your QP's buckling since you won't need to pull, and I don't think you're too worried about your paint

Hammers work well too.

The article about the baseball bat rolling is from Super Street.

[DuaneG]

I thought so too, what cover or month, do you know? I know I have it, but I have a box full of them. I don't want to look through every page of every one.