I'M done with starting this thing

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
Sil80315
Posts: 1084
Joined: Mon Jan 30, 2006 4:34 pm
Car: 1991 Nissan 240sx
Contact:

Post

Not so much what its tuned for but who did the tuning. I know what the daughterboards from the most popular rom tuners look like, such as Enthalpy, JWT, and Emance.


User avatar
ZOMG.SR20
Posts: 2703
Joined: Sat Mar 29, 2008 5:12 pm
Car: 1990 s13
Contact:

Post

so today I unplugged the daughterboard and it ran perfectly for like 10minutes the as it was idling it started to bog so i gave it gas to keep it running then after I let go of the gas it would idle and slowly die.... wont start again. the only way ive been able to get this started is let it sit for 2 days then it will start right up

User avatar
Sil80315
Posts: 1084
Joined: Mon Jan 30, 2006 4:34 pm
Car: 1991 Nissan 240sx
Contact:

Post

sounds like its getting to much fuel and killin the plugs. are your plugs nice and black?

Thrasher068
Posts: 41
Joined: Mon May 11, 2009 2:09 pm
Car: 91 240sx

Post

Just unbolt the coil packs and remove the plugs get a air hose in there and blow the cylinder out and let the plugs drt in the sun or spray alittle brake clean on them and try again.

User avatar
ZOMG.SR20
Posts: 2703
Joined: Sat Mar 29, 2008 5:12 pm
Car: 1990 s13
Contact:

Post

yes


Return to “SR20DET Forum (rear-drive)”