I wish I could! But i did manage to get a job at Midas! yay! $$$$drksolest wrote:I'm not doing well right now... but weekend was k, did my clutch, went to nashville yesterday to get a bumper support for gabe, went home turned my car on and she starts shaking. i've had a long weekend, and all i want to do is Nothing for a day. so when i get home tonight, i'm going to watch tv and do nothing!
numbnuts240 wrote:i'd venture to say a busted motor mount or a dead cylinder before a bad headgasket if your car is shaking.
I've done it several times and can pull it off in less than 4 hours... You shouldn't need more time than that. But like I said, MY DAD, wants me to have it done "professionally"numbnuts240 wrote:just hope there isn't any warpage. if you have the tools and can dedicate a day to it, you should be able to handle that yourself. if not, go to a smaller, private garage, their rates tend to be more reasonable.
Nope. If its shaking violently, then its going to be your #1 or #4 cylinder. Most likely the injector has gone bad/clogged or you need to jiggle the wire going to it :/drksolest wrote:yar might be my #3...
Dattebayo wrote:
Most likely the injector has gone bad/clogged or you need to jiggle the wire going to it :/
i tend to take a lot of beer breaks when working on my car lol.pflicht wrote:I've done it several times and can pull it off in less than 4 hours... You shouldn't need more time than that.
i could use a beer right nownumbnuts240 wrote:
i tend to take a lot of beer breaks when working on my car lol.
GOnissanTOM wrote:ill give you all something to jiggle and wiggle.......
zerothread?id=296477drksolest wrote:that's the thing, this morning when i started her up to go to work she wasn't acting up at all.
not the 1 or 4.
...from my previous experience around NICO. If not this then it has to be something else.Dattebayo wrote:If the injector for either cylinders 2 or 3 is out, the unbalanced load on the crankshaft usually won't be enough to make the motor shake. If the injector for either cylinders 1 or 4 is out, that will make the motor shake and sometimes it will shake so much that it will trigger the knock sensor and you will notice a much more extreme power loss...
Dattebayo wrote:
...from my previous experience around NICO. If not this then it has to be something else.