HOME MADE ANGEL EYES!!!!!!!11

[AkAd3MiKs]

Quote »akademiks... what orange part are you talking about? hehehe[/quote]Well, I dont really like them eye lids. I just want some Halo Projector headlights without that orange part. Anyway, Ill try find out who makes these and ill get back to you guys.

[bina12834]

Well, I dont really like them eye lids. I just want some Halo Projector headlights without that orange part. Anyway, Ill try find out who makes these and ill get back to you guys.

noone makes projector headlights for the 07-08 altimas yet

[brizanden]

wow kouki angel eyes here i come. u guys have cool stuff on your forums. f the 240 one its a bunch of flaming and stuff.

[ThatGuyRoger]

im diggin those eyelids!

[AkAd3MiKs]

Quote »noone makes projector headlights for the 07-08 altimas yet[/quote]"YET"....dont give up so easy. Do some research and ask if they could make it for us. Thats all you gotta do. If you wont try then no one will ever make it.....

Anyway after 5 min of googling, found out that Matrix Motorsports and Anzo USA makes Halo angel eyes/projector headlights. I know theres gotta be more reputable companies that can make these.

Heres their websites: http://www.tunedbymatrix.com/http://www ... /p....html

Someone, contact them.

[TheBourneAltimatum]

i have yet to see GOOD aftermarket projectors...if it comes down to it...i think buying some cheap eaby ones (whenever they come out) and retrofitting TSX projectors in them will be the way to go

[dangeris]

bad news is, these really only work with round light housings, we dont really have a light housing, just a bulb that reflects of the interior of the headlight

Not really. It can be done and it has been done. I also investigated this awhile back ago but not for the AC. It was for my bike and CCFL was too brittle and too costly. I had this done on my bike and it has a similar housing as our AC in which it reflects the interior of the headlights like you mentioned. Here's some pic of it so just imagine it on the AC.



Now, when the headlights are on, it does drown out the rings unlike CCFLs but that's because the rings are not around projectors. However, it does look wicked cool! To each's own I guess
Modified by dangeris at 7:36 AM 4/24/2008

[bina12834]

i have yet to see GOOD aftermarket projectors...if it comes down to it...i think buying some cheap eaby ones (whenever they come out) and retrofitting TSX projectors in them will be the way to go

this is probably what a ton of people will do.....aftermarket projectors always suck.

now about the retrofitting.....will it be as easy as taking out the aftermarket projector lenses, and replacing with the TSX lens?

[itsjustbusiness]

Umniitza was one of the companies I contacted. They said they can't do it - maybe if more people show interest it'd be good to go but after one look at the headlights they said it'd be almost impossible

[bina12834]

Umniitza was one of the companies I contacted. They said they can't do it - maybe if more people show interest it'd be good to go but after one look at the headlights they said it'd be almost impossible

nothing is impossible

[TheBourneAltimatum]

Umintza sponsers another forum and asked for interest, a lot of people said yeah its only like 30 mins from my house and what not....and then he said that owner of the test vehicle has to pay $200 for the R&D to get these mass produced so everybody said Fukk it

[itsjustbusiness]

maybe it is but the companies I contacted said no. Another company I tried was sharkracing - they said they might be able to do it but they'd need someone to send them their headlights for a couple of months (they're located in korea) and they weren't even willing to pay for that prototype set. bastards. if someone's willing to drive blind (figuratively and literally) into this by all means.

Here's an example of their stuff:http://www.sharkracing.com/ace...01000

http://www.sharkracing.com

here's the thread I started two months ago regarding this - you'll be able to see some correspondence I had with the companies:http://forums.altimas.org/zerothread?id=316766

[200hpAltima]

heyy i am sitting on a 3ed Gen here and i have made a set of these eyes...they are sick and amazing but there is a huge trick. to get the light output desired its important to use high MCD LED's. i have 2 18000MCD LED's in each ring. i have yet to install them....im waiting for a good day. anyway thats my $.02

[mcheddadi]

Not really. It can be done and it has been done. I also investigated this awhile back ago but not for the AC. It was for my bike and CCFL was too brittle and too costly. I had this done on my bike and it has a similar housing as our AC in which it reflects the interior of the headlights like you mentioned. Here's some pic of it so just imagine it on the AC.



Now, when the headlights are on, it does drown out the rings unlike CCFLs but that's because the rings are not around projectors. However, it does look wicked cool! To each's own I guess

Modified by dangeris at 7:36 AM 4/24/2008

HOT! but I don't get it, the rings are jut sitting there?

[spockrock]

HOT! but I don't get it, the rings are jut sitting there?

They must be affixed to the top of the housing, which we cannot due since the top of the headlight unit is visible.

[LongBeachCoupe]

they sell these types of lights on ebay... mind you much larger... its like fiber optic to some degree... plexiglass with light being forced inside (kinda)...

[ADKSaad1387]

woa, how similar are our headlights to the Maximas headlights? or maybe even the G35 or G37? lets think even more outside the box.

PS: Bourne. not to be a d!ck or anything but save the GTA IV sig pic for the video game forums. i kno its a sick game. but show off your altima. i havnt seen one pic

[mcheddadi]

the only headlight which looks even remotely similar to our headlights are the Nissan Teana headlights. They do have a projector version for it, so our best bet is to wait for some to come out on ebay and retrofit the entire headlight (since it's like the samel ayout almost as our)

http://www.autoblog.com/2008/0...d-out

[spockrock]

that shroud I think would go well with the altimas.