High Pressure Power Steering Hoses for the Masses!

A forum for approved vendors of specialized, limited-production parts. Help small businesses that cater to Nissan enthusiasts and score some unique, useful parts! Contact [email protected] for approval and rates.
User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA
Contact:

Re: (nateb)

Postby DJButton » Thu Oct 30, 2008 7:18 pm

nateb wrote:i need one for a sr shipped to 07728 paypal ready
Sure thing, send $75 to [email protected] and I'll ship it out ASAP.


User avatar
nateb
Posts: 318
Joined: Mon Apr 09, 2007 7:10 pm
Car: s13 hatch *working progress*
Contact:

Re: (DJButton)

Postby nateb » Fri Oct 31, 2008 3:37 am

DJButton wrote:Sure thing, send $75 to [email protected] and I'll ship it out ASAP.
Money sent

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA
Contact:

Re: (nateb)

Postby DJButton » Fri Oct 31, 2008 4:59 am

Got it, thanks!
nateb wrote: Money sent
I'll shoot you a tracking number, soon as its sent!

User avatar
nateb
Posts: 318
Joined: Mon Apr 09, 2007 7:10 pm
Car: s13 hatch *working progress*
Contact:

Re: (DJButton)

Postby nateb » Tue Nov 04, 2008 8:32 pm

DJButton wrote:Got it, thanks! I'll shoot you a tracking number, soon as its sent!
have u sent this yet

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA
Contact:

Re: (nateb)

Postby DJButton » Wed Nov 05, 2008 5:54 pm

I'll get you the tracking number tomorrow, you should get it in a few days.

sisedan
Posts: 1
Joined: Wed Feb 20, 2008 7:34 pm

Re:

Postby sisedan » Sun Nov 09, 2008 4:09 pm

Can you make a line that just replaces the hard line of the high pressure hose. I just bought a new hose and I can't get the hard line off of the old hose, and I destroyed the nut trying to get it off. It would be for an s13 with a redtop sr.

Thanks

User avatar
nateb
Posts: 318
Joined: Mon Apr 09, 2007 7:10 pm
Car: s13 hatch *working progress*
Contact:

Re: (DJButton)

Postby nateb » Tue Nov 11, 2008 6:23 pm

thanks got the line a couple days ago.....u wouldnt by chance make a line that replaces the other power steering hardlines( the ones that run across the engine bay and make that stupid loop. if not do u know the fitting sizes?
DJButton wrote:I'll get you the tracking number tomorrow, you should get it in a few days.

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA
Contact:

Re: (nateb)

Postby DJButton » Sat Nov 15, 2008 8:52 pm

nateb wrote:thanks got the line a couple days ago.....u wouldnt by chance make a line that replaces the other power steering hardlines( the ones that run across the engine bay and make that stupid loop. if not do u know the fitting sizes?
Totally missed your post, sorry man. That looped line is just for cooling, so it loops in front to give more fluid capacity and cooling. Best bet for that is to use OEM hardlines. Or really go overkill (on a street car at least) and replace that with an actual PS cooler. I can't remember the size off the top of my head though.
sisedan wrote:Can you make a line that just replaces the hard line of the high pressure hose. I just bought a new hose and I can't get the hard line off of the old hose, and I destroyed the nut trying to get it off. It would be for an s13 with a redtop sr.

Thanks
We cannot make one that just replace the soft line, sorry.

Jonnie Fraz
Posts: 99
Joined: Wed May 23, 2007 3:44 pm

Re: (DJButton)

Postby Jonnie Fraz » Sun Nov 16, 2008 6:26 pm

DJ,

Sending you payment via Paypal right now for DOHC line.

Thanks BuddyJonnie

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA
Contact:

Re: (Jonnie Fraz)

Postby DJButton » Sun Nov 16, 2008 7:29 pm

Jonnie Fraz wrote:DJ,

Sending you payment via Paypal right now for DOHC line.

Thanks BuddyJonnie
Thanks man, got it!I'll shoot you a tracking number soon as it's shipped.

User avatar
idahotuner
Posts: 10583
Joined: Thu Jun 28, 2007 7:11 am
Car: 2012 ram 2500 6.7 cummins, 93 Sileighty and 93 civic hatch, polaris ranger 2011
Contact:

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby idahotuner » Fri Nov 21, 2008 10:23 pm

i am getting ready to put PS on my 240. i havea PS rack in it but i will need all new lines and am i nthe proces of picking up a pump. i need to look at the diagrams on alldata again. bt i will be back here to get them.

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA
Contact:

Re: High Pressure Power Steering Hoses for the Masses! (idahotuner)

Postby DJButton » Sat Nov 22, 2008 7:53 am

idahotuner wrote:i am getting ready to put PS on my 240. i havea PS rack in it but i will need all new lines and am i nthe proces of picking up a pump. i need to look at the diagrams on alldata again. bt i will be back here to get them.
Well if the pump falls thru I can hook you up with an SR pump as well. Let me know when you're ready.

User avatar
idahotuner
Posts: 10583
Joined: Thu Jun 28, 2007 7:11 am
Car: 2012 ram 2500 6.7 cummins, 93 Sileighty and 93 civic hatch, polaris ranger 2011
Contact:

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby idahotuner » Sat Nov 22, 2008 8:21 am

oh hey well if you have everything that would be the way to go. basically i dont have any thing for PS right now besides the DOHC rack that is i nthe car. and i think a few of the lines are broken and cut off. so i would need basically every single line for it. i hope my rack is good. i may have to pull it apart and redo the seals.

so how mcuh would it run for the pump and everything.

User avatar
eazye2000
Posts: 1881
Joined: Mon Jun 27, 2005 9:42 am
Car: S13 KA-DET
Location: Inverness, FL
Contact:

Re: High Pressure Power Steering Hoses for the Masses! (idahotuner)

Postby eazye2000 » Mon Nov 24, 2008 2:14 pm

Just wanted to pop in here and let everyone know my line I got from Dan is holding up very well.

Leaving it a bit longer let me route it around, and away from all the hot stuff associated with a KA-T.

Side note- Just found out we can make these at my job. lol

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA
Contact:

Re: High Pressure Power Steering Hoses for the Masses! (idahotuner)

Postby DJButton » Mon Nov 24, 2008 10:31 pm

idahotuner wrote:oh hey well if you have everything that would be the way to go. basically i dont have any thing for PS right now besides the DOHC rack that is i nthe car. and i think a few of the lines are broken and cut off. so i would need basically every single line for it. i hope my rack is good. i may have to pull it apart and redo the seals.

so how mcuh would it run for the pump and everything.
Ben,Say $150 for the pump and line and bracket for the pump if you need it? You'll still need a belt for pump and the hardlines that just loop in front of the rack, they're like an external fluid cooler for the PS system, so if you just want to skip them for now I can send you the two block off plugs for them as well.

Eric, thanks for the kind words, glad it's held up to the KA-Tinsanity abuse!

User avatar
idahotuner
Posts: 10583
Joined: Thu Jun 28, 2007 7:11 am
Car: 2012 ram 2500 6.7 cummins, 93 Sileighty and 93 civic hatch, polaris ranger 2011
Contact:

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby idahotuner » Tue Nov 25, 2008 8:50 pm

ok. i am going to do the by pass for the liens going in front of the rack.

i know i will needa belt too.

waht is your pay pal

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA
Contact:

Re: High Pressure Power Steering Hoses for the Masses! (idahotuner)

Postby DJButton » Tue Nov 25, 2008 9:00 pm

Paypal is [email protected] Taking a Thanksgiving break, but I'll be back around next week.

User avatar
idahotuner
Posts: 10583
Joined: Thu Jun 28, 2007 7:11 am
Car: 2012 ram 2500 6.7 cummins, 93 Sileighty and 93 civic hatch, polaris ranger 2011
Contact:

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby idahotuner » Wed Nov 26, 2008 9:43 am

sounds good.

User avatar
yotik
Posts: 777
Joined: Sun Jul 08, 2007 5:14 pm
Car: 240sx Hatch

Re: High Pressure Power Steering Hoses for the Masses! (idahotuner)

Postby yotik » Fri Dec 05, 2008 12:57 pm

I got my line in today and its perfect fit

one more question

are you guys keeping the stock secondary hose? any advice would be valued.
Modified by yotik at 3:13 AM 12/6/2008

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA
Contact:

Re: High Pressure Power Steering Hoses for the Masses! (yotik)

Postby DJButton » Wed Dec 10, 2008 2:53 pm

Christmas special, $10 off thru end of the month!

User avatar
corn322
Posts: 1572
Joined: Tue Apr 22, 2003 10:11 am
Car: 1993 240sx
Location: Austin, TX
Contact:

Postby corn322 » Tue Dec 16, 2008 8:43 am

DJ, I sent you an email from corn322(at)gmail about ordering one of these.

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA
Contact:

Re: (corn322)

Postby DJButton » Tue Dec 16, 2008 1:16 pm

Sure thing! I have internet again after ice taking out the power for a few days! I'll get right on it.

theaustineedshelp
Posts: 1
Joined: Sun Jan 04, 2009 5:35 pm

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby theaustineedshelp » Sun Jan 04, 2009 5:39 pm

hello, i'm totally new to any of this. i really need the high pressure hose for my 240... its a 1991 ka24 so i need to know if i can order one from you and how i go about it. thanks

User avatar
nyc240sx
Posts: 446
Joined: Wed Sep 19, 2007 9:53 pm
Car: 1995 Nissan 240sx SE
Rb25det series 2

Re: High Pressure Power Steering Hoses for the Masses! (theaustineedshelp)

Postby nyc240sx » Sun Jan 04, 2009 6:45 pm

i have a 95 240sx with a rb25det in it iam interested in getting the line let me knowthanks

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA
Contact:

Re: High Pressure Power Steering Hoses for the Masses! (theaustineedshelp)

Postby DJButton » Mon Jan 05, 2009 12:29 pm

theaustineedshelp wrote:hello, i'm totally new to any of this. i really need the high pressure hose for my 240... its a 1991 ka24 so i need to know if i can order one from you and how i go about it. thanks
Yes, I have a few in stock right now, you can pay
nyc240sx wrote:i have a 95 240sx with a rb25det in it iam interested in getting the line let me knowthanks
Not a problem, many RB swapped happy customers.

User avatar
nyc240sx
Posts: 446
Joined: Wed Sep 19, 2007 9:53 pm
Car: 1995 Nissan 240sx SE
Rb25det series 2

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby nyc240sx » Mon Jan 05, 2009 9:57 pm

payment sent for that rb25 ps line.thanks

robertswes
Posts: 1
Joined: Wed Jan 07, 2009 4:04 pm
Car: 2006 Nissan Murano

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby robertswes » Wed Jan 07, 2009 4:12 pm

Hey. I just found you online. I have a 06 Nissan Murano and have a leak in the high pressure power steering hose (the dealership was going to charge $455 to replace).

Was wondering if you have any hoses available for the Murano?

This is my first time on this forum so not really familiar with the paying and ordering system. (I have used paypal in the past)

Thanks for your time and help.

Wes

my90coupe
Posts: 100
Joined: Sun Dec 21, 2008 4:46 pm
Car: 90 coupe

Re: High Pressure Power Steering Hoses for the Masses! (robertswes)

Postby my90coupe » Wed Jan 07, 2009 5:41 pm

hey im in need of a ps line for an rb20 into a 90 ka24e sohc coupe

User avatar
nyc240sx
Posts: 446
Joined: Wed Sep 19, 2007 9:53 pm
Car: 1995 Nissan 240sx SE
Rb25det series 2

Re: High Pressure Power Steering Hoses for the Masses! (my90coupe)

Postby nyc240sx » Wed Jan 07, 2009 9:56 pm

heres the link for the hose for your muranohttp://www.trademotion.com/par...gid=1

DALAZ_68
Posts: 1575
Joined: Mon Apr 09, 2007 7:01 pm
Car: 90' 240sx CA18det
Contact:

Postby DALAZ_68 » Fri Jan 09, 2009 7:14 pm

any word on CA18DET fitment


Return to “Fabricators' Market”