Hello fellow Q45 owners!

[NSRG50]

try Nissan Only Wreckers....

http://www.ninfiniti.com for stock parts.

[VIP Q45t]

So there was no structural damage?

Too bad she wan't autolobotomized.

According to my friend that use to work at a body shop said that there is no frame damage. It just needs a new bumper and the passenger side tail light has to be pulled back out.

try Nissan Only Wreckers....

http://www.ninfiniti.com for stock parts.

Thanks for the link. Have you dealt with them before? Are they realiable?

[VIP Q45t]

Right now everything is still up in the air. But I need some suggestions.

If I have the option of repainting my Q45, should I....1) Keep it the stock Black Emerald2) Go pure Black3) Go White (maybe Pearl White)

[Americain]

Thank you all for your warm welcomes and help!

goody94q45 I will look into that. The previous owner told me that I should change the injectors. So now I'm sure that is the problem, but I will do the ohm test. He also gave me his repair log from 1994.

unknown007 that photoshop of my car looks good! At first I didn't know that was my car until I looked closer. Haha!

jltibbs I have already quickly browsed through the VIP forums. I think I will be inquiring there very soon. Thanks.

Since I had some extra time this weekend, I cleaned up the rims. They were all dirty, you can sorta tell from my earlier pictures. After I finished cleaning them, they looked almost like new so had to snap some pictures...

Modified by VIP Q45t at 8:33 PM 8/25/2008

Welcome VIP. Your Q is identical to mine, same color and all. Is yours called Black Emerald? If so it's the same as mine. We also have the same wheels and herein lies my problem. I have my center caps in the trunk but am missing the screws that hold them on. I inquired with the dealer and they had no information. Would it be possible for you to take a pic of your wheels without the center caps on? I realize this is a lot to ask but could you help a brutha out? Many thanks in advance.

[Infinitiguy19]

Well just place the center cap on the wheel -> then turn the center hex cap to the right (the thing that says BBS, Infiniti logo, elite or what ever else it says)-> then have a cold one and feel like you did something for the day

[ZeeZee]

Well, how is that new to you Q45 doing? You have had her now for a month...are you still smiling from ear to ear each time you see her? I know I do everytime I talk about mine or see mine...she is a 91' Q-45 and in pretty good shape..I have had her now for about six months and I couldn't be happier...have taken her on some road trips to the coast (from Sacramento) and she loves the mountains...I hope you are having good times with yours now too..I will say this though...I didn't have a clue about these cars until I joined this club...they have been so helpful with any and all of my silly questions and their technical pages were made for step by step dummies like me...love this club and gurantee you will too.

[Americain]

Well just place the center cap on the wheel -> then turn the center hex cap to the right (the thing that says BBS, Infiniti logo, elite or what ever else it says)-> then have a cold one and feel like you did something for the day

Mine don't have the small bolts which attach the center cap. I need to see what they look like because I don't have them but VIP does.

[VIP Q45t]

I will try getting you pics when I have more time. But did you try twisting the huge infiniti logo thing, like ppastos said? Because that is the only thing holding the center cap onto the rim, that huge boltish thing is the only "bolt" that you need. Removing/replacing the center cap also is covered in the owners manual.

Well hopefully that helps. If not I'll try get some pics up.

[StuartG]

Bringing back an older thread to get some help. I just bought a set of these 15 inch wheels that I planned to put on my 1994 Acura Legend.

I am having a hard time finding wheels bolts that will seat properly ito the BBS bolt holes and thread onto my Acura.

Do I neeed some special BBS / Nissan wheel bolt ? I going to have trouble making this work ?

Any help would be greatThanks

[MR. Q]

Welcome, welcome, welcome!

That photoshop looks like YES!

[bravothao1983]

Yo you know I can get some lower springs for my 99 Q45?

[VIP Q45t]

Yo you know I can get some lower springs for my 99 Q45?

WTF?

[qship96]

Try the local community college, they have exactly what you need!!! Probably the best investment of time and money you can make.

[VIP Q45t]

New Pics!


Modified by VIP Q45t at 11:47 AM 6/24/2009

[spunkrat]

That looks awesome mate!! Mine is the same colour, and 1994 model also. Love the rims!! Ride height is good too!!