Gauging Interest: Fast Intentions Exhaust!!

[FGFCacoupe]

Alright, I'll try to look up his number and give him a call

(818) 882-2788, this is the number, make sure you ask for Tony.

[maxentropy]

So when's this going to be available?

I've been waiting on an exhaust of this quality to be released.

[nnguyen]

I'm in for one for the sedan, but needing a exhaust to go with stillen header race pipe combo soon :O

[Loop]

So when's this going to be available?

I've been waiting on an exhaust of this quality to be released.

Unfortunately its not a guarantee it will be in production.

It would really help if people started posting in this thread with which vehicle they have and which exhaust component they want. We need more people to start posting. Don't be afraid to chime in. This is really up to you guys if you want to see this exhaust in production. I am just here to help you guys out.

Example:Vehicle: Altima Sedan 3.5SEExhaust component interested in: Cat-back exhaust(CBE), y-pipe, and hi-flow cats(HFC)

Feel free to post any questions here.

[FGFCacoupe]

Unfortunately its not a guarantee it will be in production.

It would really help if people started posting in this thread with which vehicle they have and which exhaust component they want. We need more people to start posting. Don't be afraid to chime in. This is really up to you guys if you want to see this exhaust in production. I am just here to help you guys out.

Its completely up to us, and as Loop said he is just here to help us out. As with any aftermarket part, the supplier will put the part into production as long as enough interest is shown. We need all the interest from as many members as we can to get this exhaust into production. Fast Intentions makes amazing products, we have to get this into production. I made a thread with a link to this thread in the 1st generation section, because that is where the majority of the members seem to look, but I think that a mod deleted it for some reason that I dont know. It was just a link to this thread, and it stated that I made that thread only so people would not overlook this thread because of it being located in the Engine/Drivetrain section. So if someone else would maybe make another link to this thread in the 1st generation section, that would help a lot.

[FGFCacoupe]

Example:Vehicle: Altima Sedan 3.5SEExhaust component interested in: Cat-back exhaust(CBE), y-pipe, and hi-flow cats(HFC)

Feel free to post any questions here.

Ill start:Vehicle: 2008 Nissan Altima CoupeExhaust component interested in: Cat-back exhaust, y-pipe, high flow cats, resonated test pipeEverything that Fast Intentions comes out with will be on my car asap, if we can get things into production.

[BigDankCloud]

I'll go next then.Vehicle: 2008 Nissan Altima CoupeExhaust Component interested in: Y-pipe, HFC, resonated test pipe as long as it mates up to my Borla.

[Jose3.5]

Unfortunately its not a guarantee it will be in production.

It would really help if people started posting in this thread with which vehicle they have and which exhaust component they want. We need more people to start posting. Don't be afraid to chime in. This is really up to you guys if you want to see this exhaust in production. I am just here to help you guys out.

Example:Vehicle: Altima Sedan 3.5SEExhaust component interested in: Cat-back exhaust(CBE), y-pipe, and hi-flow cats(HFC)

Feel free to post any questions here.

I'll take that set up

[Jose3.5]

Do you think they would be able to do something like this

http://www.youtube.com/watch?v...lated

[Loop]

Do you think they would be able to do something like this

http://www.youtube.com/watch?v...lated

Not for a production exhaust.

[Loop]

I'll go next then.Vehicle: 2008 Nissan Altima CoupeExhaust Component interested in: Y-pipe, HFC, resonated test pipe as long as it mates up to my Borla.

Yes, it will just replace the stock parts. Simple bolt on

[FGFCacoupe]

This is great, lets keep this interest going

[BigDankCloud]

Yes, it will just replace the stock parts. Simple bolt on

.

Perfect. I was ready to buy yesterday. Lets get this ball rolling.

[Loop]

Thanks everyone who voted. This thread was purely to see if there was interest. Unfortunately the CBE exhaust won't be in production anytime soon or in the market. Though there is still possibility of a downpipe for 07+ Altima 3.5SE vehicles. I will be making a thread on that soon. Stay tuned.

[marvin5087]

ide rather test pipes but i'll take a set of high flow cats..i was actually going to just get my cats borred out from the headers but i figure if this comes through might as well get them..any price guess?

[rjdmmfl1]

OK, good news and bad news....

bad news: I spoke with Fast Intentions today (still waiting to talk to Tony) .. and as stated, there may not be enough interest to warrant them putting this into production....

good news: they did say that, just like they did for Loop-, they can do 1 up custom exhausts for folks here in the SOCAl area.... unfortunately, ONLY for folks IN SOCAL since this won't be a production item.... I think I'm finally ready to settle on my exhaust setup...

fats Intentions Resonated Test pipe or HFCRacingline y-PipeFast Intentions Stainless steel ecxhaust.... SOCAL KICKS A$$!!!!!!!!!!!

[Loop]

Rob, I highly recommend getting an FI exhaust. Tony is a great guy! The craftsmanship is just amazing. Customer service is outstanding. Can't go wrong. Your setup will look sick and sound sick! It will be a similar setup to mine depending which downpipe you go with.

It is still possible to get this into production if at least 10 people are willing to pay the dough and put a deposit.

[rjdmmfl1]

Rob, I highly recommend getting an FI exhaust. Tony is a great guy! The craftsmanship is just amazing. Customer service is outstanding. Can't go wrong. Your setup will look sick and sound sick! It will be a similar setup to mine depending which downpipe you go with.

It is still possible to get this into production if at least 10 people are willing to pay the dough and put a deposit.

yeah, that would be better... but I have no faith in NICO forum members when it comes to buying mass orders of products that cost $1000 , or $900, $800, $700, $600, or $500 for that matter!

[Loop]

That is what I said to Tony but in different wording and told him that the only way I see people buying this exhaust is by using the layaway plan. In fact, I even used the layaway plan to get my exhaust.

[emprbasist]

Loop - is the exhaust they made you a cat back system, or what all was included? Aluminum or stainless steel?

[mcheddadi]

That is what I said to Tony but in different wording and told him that the only way I see people buying this exhaust is by using the layaway plan. In fact, I even used the layaway plan to get my exhaust.

Video of your exhaust please

incabin crusin around 2k 3kincabin idleincabin startup plus rev

those would be nice if you have the time ^_^

[rjdmmfl1]

OK guys, you all got the email from Matthew, let's get on this... I don't want me and Loop to be the only ones with a custom Fast Intentions exhaust... I 'm definitiely going to jump on this!!

[Jose3.5]

I'll be heading up to see them soon.

[Loop]

Loop - is the exhaust they made you a cat back system, or what all was included? Aluminum or stainless steel?

My setup is catback exhaust that is made out of stainless steel. My rear section is polished.

OK guys, you all got the email from Matthew, let's get on this... I don't want me and Loop to be the only ones with a custom Fast Intentions exhaust... I 'm definitiely going to jump on this!!

Nothing wrong with having our unique setup

I'll be heading up to see them soon.

Hope everything goes well. Tony is awesome.

[Loop]

Video of your exhaust please

incabin crusin around 2k 3kincabin idleincabin startup plus rev

those would be nice if you have the time ^_^

I won't be posting a video anytime soon. But from what you requested, it seems like you wanted to know if it drones. Yes, there is a bit droning at around 2k. After 2.7k, no droning.

[mcheddadi]

did you get a resonated setup or not?

[Loop]

did you get a resonated setup or not?

I have a resonated setup. Look at the pictures Matt posted in the other FI thread.

[eddie_obie]

Count me in for a SEdan ALtima setup

HF cats testpipes and catback

[mikegtr06]

hey loop i would like to get a hold of you with questions about your body kit, but your email is hidden, please shoot me an email thanks.... /end thread jack.

[trayharrell951]

This is never going to happen. There isnt enough demand for this exhaust. I have this exhaust on my 370z sounds great. i have my long tube headers on order. Plus people wont spend 1000 for a great exhaust and it has options like a carbon fiber exhaust. Im sure if you ask him he will make one for you at a price...